ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Late News Poster Session
Presentation Title J-52: Towards a Magnetic Field Induced Strain in Additive Manufactured NiMnGa Shape Memory Alloys
Author(s) Robert Chulist, Anna Wójcik, Maciej Kowalczyk, Łukasz Żrodowski, Norbert Schell, Rafał Wróblewski, Wojciech Maziarz
On-Site Speaker (Planned) Robert Chulist
Abstract Scope Selective laser melting (SLM) process was used to manufacture NiMnGa-based polycrystalline samples. The initial powders were firstly prepared by ball milling process producing a fine particle size of about 20 µm. Depending on the composition and printing parameters three distinct types of martensite crystal structures, namely simple tetragonal, and two monoclinic modulated i.e. 10M and 14M were obtained. The localized heating/cooling conditions produce a layered microstructure with a strong fiber <100> texture along the growth direction. The crystal structure and crystallographic texture drastically change when laser oscillation mode is chosen. The results are discussed with respect to crystallographic texture, printing mode, heat treating process, and the resulting magnetic field-induced strain. The financial support by National Centre for Research and Development of Poland is acknowledged for funding (TECHMATSTRATEG 2/410941/4/NCBR/ 2019).
Proceedings Inclusion? Undecided
Keywords Additive Manufacturing, Phase Transformations, Characterization

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A-23: Computational Discovery of Ultra-high Strength BCC Refractory Metal-based MPEAs
A-24: Geometric Analysis of the Growth Front of Iron Borides Fe2B in AISI-1018 Steel
A-25: High Solid Content Porous Cordierite with Controllable Structure Prepared by Pickering Emulsion Technology
A-27: Self-healing Behavior of Fe-Ni Base Superalloy Based on Spontaneous Segregation of Boron
A-28: Software Design for ICME, PSPP and Multiscale
A Novel Electrolytic Process for the Production of Cu Metal from Chalcocite in CuCl – KCl Molten Salt at 473 K
B-4: Corrosion Evaluation of Cold Spray Materials on SS304L Material
C-4: Correlation between Crystallographic Microstructure of Electrodeposits and Adsorption of Additives through Electrochemical Calculations at Feature Scale
C-5: Effect of Antimony on the Microstructure Evolution and Mechanical Properties of Near Eutectic Sn-Bi and Sn-Bi-Ag Alloys
Conducting Graphene Synthesis from Electronic Waste
Crystal Plasticity Analysis of Temperature-sensitive Dwell Fatigue in Ti-6Al-4V Alloy for an Aero-engine Fan Disk
D-29: DFT Studies on the HER Activity, Electronic Structure, and Bonding Properties of the Boride MoxVx-1B2 (0 < x < 1)
D-30: Electricity Properties of Foam Insulation Materials
D-31: Extraction of Strategic Metals from Spent Catalyst by Using Integrated Hydrometallurgical Approach
D-33: Iron-rich Layered Chalcogenide Fe5Ge2Te2 for Highly Efficient Hydrogen Evolution
D-34: Molybdenum Borocarbide (Mo2BC) as a New Electrocatalyst for Hydrogen Evolution Reaction
D-35: Study on the Gasification Reactivity of Hypercoal Coke
Data-driven Approach to Design of Multicomponent Metallic Glasses
Show details for [<a href="/PM/PM.nsf/ApprovedAbstracts/F3B37B4CA3F2B7CB85258780001F1F4E?OpenDocument">Defect Structure ClassifDefect Structure Classification of Neutron-irradiated Graphite Using Supervised Machine Learning
Development of Mg2+/0 Reference Electrode Chemistry for the Electrochemical Investigation of Nickel Alloy Corrosion in UCl3 Containing Chloride Melts
E-29: Development of Heat Dissipation Housing for Sensing Device through Material Development and Prediction of Heat Dissipation Phenomenon
E-30: Influence of Atmosphere and Temperature on PAH Emission from Green Anode Paste
E-32: Microstructure and Mechanical Properties of Al-Cu-Ca Based Alloys with Sn Addition
E-33: Newly Developed Ceramic Foam Filters for Filtration and Hydrogen Removal in Aluminum Casthouses
Effect of Cooling Rate on EN AW 6082 Alloys
Exploring Elastic and Plastic Anisotropy in a Refractory High Entropy Alloy Utilizing Combinatorial Instrumented Indentation and Electron Backscatter Diffraction
F-34: A Study on the Role of Crystal Shape on the Freeze-lining Growth and Stability
F-36: Development of Austenitic Stainless Steel with TWIP Effect
F-37: Effect of Modifiers on Charge Dissipation and Properties of Electrosprayed Melting Gels
F-40: Enhancing Mechanical Properties of Molybdenum with Equal Channel Angular Extrusion Processing
F-41: From Long-term Aging to Rapid Annealing – The Heat Treatment Optimization of Melt-spun Fe81Ni4Cu1B14 Alloy. Crystal Structure and Magnetic Properties Evolution
F-43: X-ray Decomposition of PET Nanoparticles as an Alternative Process to Decontaminate Water Resources
Formation of Macroscopic Deformation Band in Porous Metals with Unidirectional Pores
G-34: Strain-dependent Dislocation Density Formation in 4130 Steel Studied by Neutron Diffraction
H-29: Enhancing HER Performance of Transition Metal Borides (TMBs) Nanoparticles Synthesized with Excess Sn Flux
H-30: Evidence for Nanoindentation Induced Dynamical Recovery in Aluminum
H-31: Evolution of Microstructure and Crystallographic Texture of Ni-Mn-Ga Melt-spun Ribbons Exhibiting 1.15% Magnetic Field-induced Strain
H-34: Low-cost Solution Processed Facile h-MoO3 Synthesis for Heterojunction Diode
H-35: Microscratch Characterization of Multilayered Cu-Nb Produced by Accumulative Roll Bonding
Improved Room Temperature Formability of High Strength Al Sheets Using Friction Stir Processing
J-49: Data-driven Quality Control of Laser Directed Energy Deposition (DED)
J-51: Laser Metal Deposition (LMD) and High-speed Laser Cladding – Perspectives for Brake Discs
J-52: Towards a Magnetic Field Induced Strain in Additive Manufactured NiMnGa Shape Memory Alloys
J-53: Uncovering the Deformation Pathways of an AM Ti Alloy with Engineered Duplex Microstructure
J-9: Influence of Process Parameters on Defect Formation for AA 6061 via Laser Powder Bed Fusion Additive Manufacturing
K-16: DFT Screening of Exciton Delocalization and Coupling Properties of Dyes for Aggregate Systems
K-17: Electrochemical Thyroxine Detection Using Copper Metal Organic Framework and Polyaniline Composite
K-18: Stretchable-ion Responsive Hydrogel and Its Rheology
L-51: An Innovative Mass Spectrometer Simplifies Elemental Characterization of Metals
L-52: Application of HRTEM and LTEM for Investigations of Microstructure and Magnetic Domain Structure of Nanocrystalline Fe Based Soft Magnetic Materials after Ultra-rapid Annealing Process
L-53: Computer Vision for Microvia Characterization
L-54: Correlative Microscopy and Applied Statistics – Development of a Simultaneous Electron Diffraction and Energy Dispersive X-ray Spectroscopy Data Analysis Method to Understand Interface Populations
L-55: Digital Image Processing for the Analysis of Spray Coated Porous Films
L-56: High Resolution STEM and LM STEM DPC Studies of Ni-Mn-Ga Based Precursor Powders and 3D Printed Magnetic Shape Memory Alloys
L-57: Enhancement of Electrical, Thermal and Mechanical Properties of Epoxy-carbon Nanotube/Egg Shell Ash Particles Nanocomposites
L-58: Experimental and Computational Investigations of TiIrB: A New Ternary Boride with Ti1+xRh2−x+yIr3−yB3-type Structure
L-60: Study of the Martensitic Transformation by Deformation of Traction in the Steels AISI 304 through Electrical Resistivity
L-61: Thermogravimetric and FTIR Analysis of Amazonian Oils
L-62: X-ray Tomography In-situ Mechanical Testing
L-63: XRD and SEM Characterization of Amazon Biomass Residues: Euterpe Oleracea, Theobroma Grandiflorum and Astrocaryum Vulgare Mart
M-25: AI-based Design of Daytime Radiative Cooling Materials with Record Temperature Reduction
M-26: Combined Experimental and DFT Computational Study of NiTiZrCu High Temperature Shape Memory Alloy
Manufacturing of Bulk Nanocrystalline Al-Mg Alloys Using High-pressure Cold Spray Technique for High-strength Lightweight Applications
Mechanical and Sorption Indices of ZnO-rGO Hybrid Filled Natural Rubber Nanocomposites
N-39: Assessing Void Swelling Resistance of Internal Reactor Materials with an Ultrarapid Photoacoustic Technique
N-41: Effect of the Surface Roughness of Tungsten on the Sputtering Yield Under Helium Irradiation: A Molecular Dynamics Study
N-42: Fabrication and Phase Analysis of U3Si2 and UB2 Fuel Composites with Al and Al2O3 Strengthening Additions
N-43: Nanoindentation Creep Testing on Austenitic Alloys
N-44: Oxidation and Microstructural Characterization of Tristructural Isotropic Particles (TRISO) in High Temperature Mixed Gas Atmospheres
N-46: ZrO2 Corrosion Layers and Their Grain Boundary Networks
NOW ON-DEMAND ONLY - A-26: Microstructural Analysis of the Casting Defects in the Low Pressure Turbine Blades
NOW ON-DEMAND ONLY - E-34: The Modification Effect of Ultrasonic Irradiation Amplitude during Melt Treatment on Al3Zr Compounds
NOW ON-DEMAND ONLY - H-28: Carbon Nanotubes Reinforced WC-Co Hard Alloys
NOW ON-DEMAND ONLY - H-36: Multiferroism of La Modified M-type Hexaferrites
NOW ON-DEMAND ONLY – M-27: Machine Learning-enabled Framework for the Screening of Hydrogen Storage Materials
NOW ON-DEMAND ONLY: F-42: Study of the Sub-surface Thermal and Plastic Strain Distribution during Laser Shock Peening of Aerospace Grade Alloys – Simulation and Experiments
O-41: Fe-rich Metastable Multi-principal Element Alloys
O-43: Microstructural Evolution during Deformation of 1 GPa Ultrahigh Strength-high Ductility Combination Austenitic Low Density Steel
O-44: The Design Strategy and Creep Properties of Cr-free Model NiCo-based Superalloys
O-45: The Validity of Using the Hollomon-Jaffe Parameter to Predict Hardness of Tempered Low-carbon High-performance Stainless-steel Alloys for Nuclear Applications
Quasi-hydrostatic Quasi-constrained Severe Plastic Deformation of Ternary Medium Entropy Alloy
Ultrasonically-induced Microstructural Refinement during Casting of an Al-Si-Mg Alloy
Wire Process Development of Laser-assisted DED of Haynes 282 Ni-based Superalloy

Questions about ProgramMaster? Contact programming@programmaster.org