ProgramMaster Logo
Conference Tools for 2016 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2016 TMS Annual Meeting & Exhibition
Symposium Cast Shop Technology: An LMD Symposium in Honor of Wolfgang Schneider
Presentation Title Increasing Holding Furnace Capacity from 30 to be 40 Tons Molten Aluminium through Modification of Lining Design
Author(s) Muhammad Syafri Sunardi, Ivan Ermisyam, Sahala Sijabat, Muhammad Ridwan
On-Site Speaker (Planned) Sahala Sijabat
Abstract Scope PT. Indonesia AsahanAluminium (Persero) – hereinafter referred to as Inalum - is the pioneer of the Aluminium Smelter in the South East Asia region. It was designed by Sumitomo Chemical and started up in February 1982. The original capacity was 225,000 Tpy of ingot and 175 kA of amperage reduction cell and 30 Tons of Holding Furnace (HF) capacity inthe casting house. Since operation commenced in 1982, only HF-706 had been modified to increase capacity to 36 Tons in 2007. Inalum has now successfully increased furnace capacity to be 40 Tons at HF-704 in October 2014. Improvement of HF-704 has been done through optimized lining design by new materials, an improved heat-up period, and optimized reconstruction time. The improvement is done to support the increasing of production up to 300,000 Tpy in 2019 followed by diversification of Aluminium product (100% of Aluminium Ingot to be 60% of Aluminium Ingot, 30% of Ingot Alloy and 10% of Billet).
Proceedings Inclusion? Planned: Light Metals Volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

35 Years of Contributions to Cast Shop Research and Development – Honoring Prof. Dr. Wolfgang Schneider
A Comparison of Cold and Hot PoDFA Procedure for Particle Monitoring in Liquid Aluminium
Aluminum Billets D.C. Casting: Level-pour vs. Fall-pour: A Techno-historical Approach
Aluminum Casting Furnace Energy Efficiency : Recent Improvements in RTA Casthouses
Assessment of Active Filters for High Quality Aluminium Cast Products
Assessment of Settling Behavior of Particles with Different Shape Factors by LiMCA Data Analysis
Calculated Aluminum Oxidation Rates during Rotary Furnace Melting through Flue Gas Analysis - Part Two
Case Study on Round-Top Fire Rates
Design of Square Induction Coils for the Electromagnetic Priming of Ceramic Foam Filters
Effect of High Intensity Ultrasonic Treatment on the Microstructure, Corrosion and Mechanical Behaviour of AC7A Aluminium Alloy
Effect of Liquid Metal Distribution on the Flow Field and Macrosegregation during Direct Chill Casting of Aluminum Alloy 7050
Effect of Soaking Treatment on the Microstructure and Wear Behavior of the Ultrasonic Melt-treated B390 Hypereutectic Al-Si Alloy
Furnace Modelling for Efficient Combustion Gas Circulation
Furnace Pressure Control Technology for Fuel Efficiency
Grain Refinement of Self-hardening Aluminum Alloys
History and Development of Slag and Dross Pressing
Hot Tearing in DC Casting Ingot of 7XXX Aluminum Alloys
Increasing Holding Furnace Capacity from 30 to be 40 Tons Molten Aluminium through Modification of Lining Design
Influence of Oxidation on Contact Angle between Liquid Aluminum and Al2O3
Initial Development of Micro-Shrinkage Crack During Early Stages of Direct Chill Casting of Al-4.5%Cu Alloy
Inline Melt Treatment for Low to Medium Metal Flow Rates
Mechanism of Zirconium Poisoning Effect on TiB2 Inoculation in Aluminium Alloys
Modeling of Inclusion Behaviour in an Aluminium Induction Furnace
Modification of Eutectic Si and Refinement of Eutectic Grain in Al-Si-Mg Based Alloys by CrB2 and Sr Addition
Modification of Macrosegregation Patterns in Rolling Slab Ingots by Bulk Grain Migration
Numerical Simulation of Degassing Phenomena in Continuous Casting Process under External Static Magnetic Field on Flow Pattern in Slab Mold
On the Cast House Exergy Management
Optimization of the Ultrasonic Processing in a Melt Flow
Study of Manganese Dissolution in Aluminum Melts
Successful Implementation of a New Rolling Slab Casting Technology, AFM, within Hydro
Testing PPE for Molten Aluminum Splash Resistance
The Problem of Cavities in Open Mold Conveyor Remelt Ingots
The Study Conditions Occurrence of Hot Tearing in the Billets Alloy EN AW6060 Produced with the Process of Direct Chill Casting
Theory and Practical Application of Ultrasonic Degassing.
Thermo-Mechanical Properties of Wrought Aluminium Alloys produced from Scrap Mixing
TiB2 Particle Detection in Liquid Aluminum Via Laser-Induced Breakdown Spectroscopy
Ultrasonic Grain Refining of Continuous Cast Aluminum: Microstructure and Properties
Uncertainty Propagation in Numerical Modeling of Direct Chill Casting
Weibull Analysis for the Repeatability of Die-castings Made by an Al-Mg-Si-Mn Alloy

Questions about ProgramMaster? Contact programming@programmaster.org