ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Advanced Thermo-mechanical Characterization of Materials with Special Emphasis on In Situ Techniques
Presentation Title L-11: High Temperature Dynamic Mechanical Response of Titanium Alloys
Author(s) Sindhura Gangireddy, Steven Mates
On-Site Speaker (Planned) Sindhura Gangireddy
Abstract Scope Titanium alloys are widely used in aerospace industry. A constitutive material model is crucial in understanding component failure as well as in the improvement of manufacturing processes such as high speed machining. Numerous studies are happening on mathematical modeling and simulation of such conditions, but they are all only as good as the material model used. Experiments were conducted at high temperatures under dynamic mechanical and thermal loading conditions, creating close simulation of extreme THERMO-MECHANICAL events such as explosive impact, high speed machining etc. The constitutive response of Ti-6Al-4V alloy and CP-Ti will be presented from a wide range of testing conditions: room temperature - 1200C, 0.1-0.3 plastic strains and 0.000001-3000 strain rate. Effect of time dependent microstructural evolution (annealing, grain growth, phase transformation) and grain morphology (globular, lamellar, widmanstatten, martensitic) was also investigated. All results are very recent from last year study conducted at NIST.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Greater Understanding of Deformation in BCC Nanocrystalline Metals Using Quantitative In Situ TEM Techniques
A New Designed Rig for In Situ Neutron Diffraction Creep Experiments under Different Boundary Conditions
Advanced In Situ Loading Environments for High Energy Synchrotron X-ray Experiments
Characterizing Thermal- and Moisture-induced Glass Transitions Using Nanoindentation-based Dynamic Mechanical Analysis
Crystal Size and Temperature Effects on the Transformation in Deformation Modes in Twin Oriented Mg Single Crystals
Development of a High Temperature Tensile Tester for Micromechanical Characterization of Materials Supporting Meso-Scale ICME Models
Dislocation Drag Coefficient Measurements via In-situ Micropillar Compression Experiments
Dislocation Shielding as a Function of Temperature in Microscale Silicon Bending Beams
Effect of Ausforming on Isothermal Transformation Below Ms in NiCrMoV Steel Studied by In-situ Neutron Diffraction
Elevated Temperature Mechanical Properties of Three Component Nanolaminate Thin Films
Extraction of Crystal Plasticity Parameters of IN718 Using High Temperature Microcompression
Grain Growth and Mechanical Behavior of Nanostructured Intermetallic Films Studied Using In Situ TEM Annealing and Tensile Straining
In-SEM Microscale Mechanical Testing of Thin Film Plastic Flow and Interfacial Integrity
In-situ Analysis of the Tensile Deformation Modes and Anisotropy of Extruded Mg-10Gd-3Y-0.5Zr (wt.%) at Elevated Temperatures
In-situ Experiments Combining SEM and X-ray Computed Tomography
In-situ Imaging and Diffraction Studies of Shear Band Nucleation and Propagation in Metallic Glass and Composites
In-situ Micro-Laue Diffraction and HR-EBSD Investigation to Understand the Microstructure-deformation Interactions in Dual-phase Titanium Alloy, Ti6242, Using Micro-pillar Compression
In-situ Neutron Diffraction Analysis for Dynamic Ferrite Transformation Behavior in Low-carbon Steels
In Situ 4D Tomographic Examination of Semi-solid Indentation Behaviour in Ni and Co Based Alloys
In Situ Characterization of Electromigration and Thermal Cycling Damage and Grain Growth in Cu/Pure Sn/Cu Solder Joints
In Situ Micro-mechanical Testing of Ion Irradiated Materials
In Situ TEM Imaging of Defects in Metallic Samples Deforming at High Strain Rates
In Situ TEM Study of Atomic Level Phase Transformation in Cerium-based Oxides during Redox Processes
In Situ Thermo-mechanical Characterization of Materials
In Situ X-ray Diffraction Study of Strain Path Change Effects in Al-5wt% Mg (AlMg5) Using a Miniaturized Multiaxial Deformation Machine
Influence of Dislocation Density and Grain Boundaries on the Scaling Behaviour of Ultrafine-grained BCC Micropillars
Investigating Grain Rotations in Ultrafine-grained Aluminum Films Using In Situ TEM Straining with Automated Crystal Orientation Mapping
L-10: Deformation Characteristics of NiTi Alloys
L-11: High Temperature Dynamic Mechanical Response of Titanium Alloys
Local Strains and Crack Initiation in Lamellar Gamma-TiAl
Micro-Mechanical Characterization of Micro-Architectured Tungsten Coating at Elevated Temperatures
Multiscale 3D Imaging of Damage in an Angle-Interlocked Ceramic Matrix Composite under In-Situ Mechanical Loading Using Lab X-Ray Microscopy
Optimum Layer Thickness for High Temperature Mechanical Properties of ARB Cu/Nb Nanoscale Multilayers
Plasticity and Time Dependent Stress Relaxation in FCC Nanowires
Plasticity of Nano-Sized Metallic Glasses
Probing the Dynamic Response of Ordered Lattice Materials
Progress in In-situ Testing in the Electron Microscope at Cryogenic Temperatures
Pushing the Envelope in Variable Temperature Nanoindentation: High and Cryogenic Temperature Measurements
Site-Specific Mechanical Evaluation Using Microscale Samples Tested In Situ within SEM and XCT
Understanding the Local Ligament-level Deformation Response in Unit Cell Lattices
Unusual Brittle to Ductile Transition in Single Crystalline Silicon: In Situ Micro-scale Fracture Studies at Elevated Temperature
Unveiling the Micromechanical Response of Mg Alloys by EBSD-assisted Slip Trace Analysis
In-Situ Thermo-mechanical Characterization of Serrated Flow in Nanostructured Binary Mg-Al Alloys

Questions about ProgramMaster? Contact programming@programmaster.org