ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Energy Materials 2017: Energy and Environmental Issues in Materials Manufacturing and Processing
Presentation Title Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes
Author(s) Youliang He, Mehdi Sanjari, Erik J. Hilinski, Mehdi Mehdi
On-Site Speaker (Planned) Mehdi Mehdi
Abstract Scope Obtaining the ideal <001>//ND texture in non-oriented electrical steel sheets was the goal of many past investigations. However, it was difficult to achieve the desired texture using conventional rolling techniques. In this research, two unconventional cold rolling schemes (inclined and skew rolling) were proposed and tested: in inclined rolling, the cold rolling direction (CRD) was inclined at an angle (0°-90°) to the hot rolling direction (HRD) so that the initial texture was changed; in skew rolling, the hot band was fed into the rolls at a tilted angle (0°-45°) to the conventional feeding direction so that both the starting texture and the rolling deformation were changed. Non-oriented electrical steels containing 0.9 wt% and 2.8 wt% Si were cold rolled using these schemes, and the textures were measured. It was found that both schemes have considerable effects on the deformation and recrystallization textures.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation
Approach for Pyrolysis Gas Release Modelling and its Potential for Enhanced Energy Efficiency of Aluminium Remelting Furnaces
C-1: Preparation of Battery-grade Ferrous Oxalate by Screening of Reaction Conditions
C-2: Synthesis and Characterization of Electrodes Made from Banana Peel for Multivalent Batteries
Energy Savings in Aluminium Sand Casting Foundries
Enhanced Thermoelectric ZT Constantan Alloy by Cryorolling
Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery
Green Development is the Future Direction for Chinese Steel Industry
Green Manufacturing Process of Shougang Jingtang Steel Plant
Nitrate and Other Anion Removal from Waste Water Using the Hydroflex Technology
Numerical Approach for the Implementation of the Interaction of Pyrolysis Gases and Combustion Products in an Aluminium Melting Furnace
Prediction and Optimal Scheduling of Byproduct Gases in Steel Mill: Trends and Challenges
Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes
Study on Treatment of Chromium Slag by Metallurgical Sintering Process
Sustainability and Applicability of Light Metals Producing Processes
The Combined Cycle Power Plant (CCPP) Used In Energy Conversion of Steel Smelting Production
The Influence of Water Vapour on the Fuming Rate in a Ferromanganese System
The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology
Thermoelectric Properties of La-doped SrTiO3 Materials Prepared by Mechanical Alloying
Waste Energy Recovery Technology of Iron and Steel Industry in China

Questions about ProgramMaster? Contact programming@programmaster.org