ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Characterization of Minerals, Metals and Materials 2022
Presentation Title Comparative Study of Staining Resistance for Polished and Resined Silicatic Ornamental Rocks
Author(s) Silmara Rocha, Evanizis Castilho, Afonso Azevedo, Lucas Reis, Markssuel Marvila, Sergio Neves Monteiro
On-Site Speaker (Planned) Afonso Azevedo
Abstract Scope The consumption of ornamental stones has become expressive in the world and has spread widely as a coating material. Therefore, in order to overcome the problems observed in relation to mechanical strength associated with rocks, an epoxy-based resin was developed to waterproof them and maintain their strength. Therefore, in addition to verifying whether the resin promotes resistance gains, the possibility that it offers stain resistance was evaluated. To carry out the tests, four types were chosen whose commercial names are: Ornamental Yellow, Corumbazinho Gray, Ocher Itabira and Labrador Green, divided into polished and resined. After the test, lemon juice and steel wool were the staining agents that caused the most visible changes. In addition, it was observed that some resin materials had a greater loss of gloss compared to polished ones, making it clear that the resin did not waterproof the rock in terms of loss of gloss.
Proceedings Inclusion? Planned:
Keywords Characterization,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Multiscale, Multimodal Approach to Studying Static Recrystallization in Mg-3Zn-0.1Ca with In-situ nf-HEDM, ff-HEDM, and DFXM
A Review of Atom Probe Tomography Technology: The Present and Future
Adsorption of Iron, Copper, Chromium and Cadmium in Cobalt Sulfate Solution by Goethite
An Investigation of the Relationship between Raw Coal Caking Characteristics and Its Petrographic Properties
Analysis of MoNbTi and HfNbTaTiZr Refractory High Entropy Alloys by Atom Probe Tomography
Application of Flue Gas Desulfurization Waste for the Production of Geopolymer Tiles
Automated Laue Pattern Analysis for Multi-peak Strain Imaging of Nanocrystals at 34-ID-C
Challenges Concerning the Characterization of Cementite in Low Carbon Steel Using Electron Backscatter Diffraction
Characteristics of Placer Gold from Glacial Sediment
Characterization and Stain Analysis in Natural and Artificial Rocks
Characterization of Blast Furnace Slag for Preparing Activated Alkali Cements
Characterization of Explosive Crystals with X-ray Micro and Nano-scale Tomography
Characterization of Mortar in Fresh State with the Addition of Acai Fiber
Characterization of Platinum Nanoparticles on a Non-conductive Perovskite Catalyst through Tailored Imaging Conditions in Scanning Electron Microscopy
Characterization of Slag and Growth of Ferronickel Grains during Smelting of Nickel Laterite Ore
Characterization of Soil from Areas Degraded by Mining Activity in Campos dos Goytacazes-RJ, Brazil
Characterizing Microstructures of Additively Manufactured Nickel and Cobalt Based Superalloys via TriBeam Tomography
Charactesrization of Nano-crystalline Metallurgical-grade Silicon Prepared from Rice Husk Ash
Chemical Analysis of Mineral Surfaces Using Digital Image Processing
Cobalt Ferrite Based Multiferroic Polymer Nanocomposites
Coking Coal Macromolecular Structural Characteristic and Its Correlations with the Compressive Strength of CaO-containing Carbon Pellets
Coking Coal Macromolecular Structural Characteristic and Its Correlations with the Compressive Strength of CaO-containing Carbon Pellets
Comparative Study of Staining Resistance for Polished and Resined Silicatic Ornamental Rocks
Comparative Study of the Flexural Strength of Rock Materials for Applications in Civil Construction
Comparison of Ceramic Blocks Incorporated with Ornamental Rock Waste in Hoffman and Caieira Furnace
Degradation of Structure and Properties of Coke in Blast Furnace: Effect of High Temperature Heat Treatment
Determination of Strength to the Hard Body Impact of Raw, Resinate and Screened Ornamental Rocks
Development of a New Small Punch Test System for Shear and Bending Tests
Development of Metakaolin Based Geopolymer Mortar and the Flue Gas Desulfurization (FGD) Waste
Development of Surface Tension and Heat Capacity Measurement Techniques for Molten Materials Using Aerodynamic Levitation
Direct Correlation of Frank Loop Nature and Morphology in Self-ion Irradiated Nickel
Effect of Equal Channel Angular Pressing and Targeted Heat Treatment on Aluminum AA7075 Sheet Metal
Employing a Semi-quantitative System to Elucidate Particle Spacing in Particle-reinforced Composite
Evaluation of Mortars with the Addition of Natural and Treated Açaí Core (Euterpe Oleracea Mart.)
Evaluation of Recyclable Thermoplastics for the Manufacturing of Wind Turbines Blades H-Darrieus
Evaluation of the Puzolanic Effect of Microsilice on Physical and Mechanical Properties in Mortar Mixtures
Evaluation of the Rheology of Mortars with Incorporation of Ornamental Stone Waste
Evolution of the Thermal Conductivity of Sintered Ag Paste as a Function of the Density, the Roughness of the Interface and Aging
Exploring Three Dimensional Orientation and Residual Stresses in Railway Steels
Fundamental Study on Wettability of Pure Metal Using the Low-melting Temperature Alloy - Experimental Approach -
Fundamental Study on Wettability of Pure Metal Using the Low-melting Temperature Alloy - Theoretical Approach
Harnessing Thermomechanical Treatment to Explore Processing-structure-property Relationships in ARB Cu/Nb
High-speed X-rays for Quantitative Analyses of Dynamic Events
Influence of pH Regulating Additives on the Performance of Granite Waste Based Paints
Interaction between Iron Ore and Magnesium Additives during Pellet Roasting Process
Interfacial Investigation of High Loaded Plastic Bonded Explosive Interfaces Modified via Biologically Inspired Core-shell Coating Technique. LA-UR-21-26026
Interpreting X-ray Absorption and Diffraction Contrast for Massive Non-destructive 3D Crystallographic Mapping of Metals in Laboratory CT
Investigation of MRO Clusters in Molten Marginal Metallic Glasses
Ion-irradiation-induced Property Change in FeCr: Hardness, Thermal Diffusivity and Lattice Strain
L-10: Characterization and Basic Properties of Vine-root "Heteropisis flexuosa" as Potential Polymer Composite Reinforcement
L-13: Characterization of Clays from Southern Espírito Santo State in Brazil
L-14: Charpy Impact on Polymer Composites Reinforced with Titica Vine Fibers
L-15: Chemical Analysis of Graphene Oxide Coating on Hemp Fibers for Engineering Application
L-17: Devitrification Behavior of Al-RE based Ternary Metallic Glasses
L-18: Effects of Natural Aging on Fique Fabric Reinforced Epoxy Composites: An Analysis by Charpy Impact Energy
L-19: Evaluation of Ballistic Behavior and Natural Aging of Epoxy Matrix Composites and Fique Fabric for Potential Use in Bulletproof Vest
L-21: Evaluation of the Projectile’s Loss Energy in Epoxy Composites Reinforced with Carnaúba Fibers
L-26: Influence of Laser Scan Speed on the Diffusion and Vaporization of a Solid-state Electrolyte Produced Using Laser Powder Bed Fusion
L-28: Influence of the Sand Content on the Physical and Mechanical Properties of Metakaolin-based Geopolymer Mortars
L-29: Investigation of the Use of Modified Polyaminoamide Imidazoline in Epoxy Composites
L-31: Mechanical Analysis of Tensile Strength of PALF Reinforced Epoxy Composite
L-33: Dynamic-mechanical Analysis of Epoxy Matrix Composites Reinforced with Kenaf Fiber
L-35: Microstructural and Mechanical Response of CoCrFeNi- FCC Matrix HEA with Addition of Mo
L-36: Promising Izod Impact Resistance of Novel Epoxy Composites Reinforced with Caranan Fiber
L-37: Properties and Microstructure of a Novel TiZrNbVFeCr-based Non-equiatomic HEA
L-38: Recycling Glass Packaging into Ceramic Bricks
L-40: Study of the Collectorless Flotation Behavior of Galena in the Presence of Ferric Ion
L-42: Surface Modification of Jamesonite during Flotation; Effect of the Presence of Ferric Ion
L-43: The Collectorless Flotation of Pyrargyrite, Surface Analysis via FTIR
L-44: The Elastic Constants Measurement in a Medical Ti-6al-4v Eli Alloy by Using Ultrasonic Means
L-45: Thermal Analysis of Graphene Oxide Coating on Hemp Fibers for Engineering Application
L-46: Thermal Analysis of PALF Reinforced Epoxy Composite TGA
L-47: Piscine Defense: Flexural and Shear Strengths of Arapaima Fish Scales
L-6: Antifungal Efficacy of AgNPs-clay Infused into LDPE Films
L-7: Application of Grinding, Pyrometallurgical Pretreatment and Silver Leaching of Mineral Tailings from the State of Morelos, Mexico
L-8: Ballistic Properties of Novel Epoxy Composite Reinforced with Sedge Fibers (Cyperus malaccensis)
L-9: Cause Analysis of Edge Scratch Defects of Cold Rolled Wide Steel Strip in Continuous Annealing Furnace
Leaching Cobalt from a Nickel-containing Copper-cobalt Zebesha Ore
Low-temperature Preparation and Mechanism Study of Vanadium Nitride
Lowering the Presence of Heavy Metals in Textured Coat Using Recycled Post Consumer Glass
Machine Learning Enabled Atom Tomographic Imaging of Chemical Short-range Order in Fe-18Al
Microstructural Characterisation of AA5083 in AA5083/SiC Co-continuous Ceramic Composites (C4) Fabricated by Gravity and Gas Pressure Infiltration
NOW ON-DEMAND ONLY - L-32: Mechanical and Microstructural Evaluation of Eco-friendly Geopolymer Produced from Chamotte and Waste Glass
On the Phase Composition, Properties and Application of AlMgB14-based Materials
Review on Hybrid Severe Plastic Deformation of ZV44 Magnesium Alloy: Microstructure, Property, and Application
Sample Preparation Influence on a Direct Artificially Aged Al-Si-Mg Alloy Elaborated by Laser Beam Melting
SAXS Tomography of Multilayered Al-Zn-Mg Alloy Sheets
Separation of Nickel and Cobalt from Nickel and Cobalt Solution by Cyanex272
Simulating Electron Microscopy to Elucidate Connections between Structural Measurements and Properties of Glassy Materials
Single Crystal Cast Microstructures Characterized by the RVB-EBSD Method
Strength and Failure Characterization of the Gibeon (IVA) Iron Meteorite
Study of the Determination of Hardbody Impact Resistance of Screened and Non-screened Ornamental Rocks of Different Thickness
Study on Efficient Burdening for Preparation of Fused Calcium Magnesium Phosphate Fertilizer from Low-grade Phosphate Ores
Synthesis and Electrical and Magnetic Characterization of Electroceramics Type Ba1-xEuxTi1-x/4O3 (x = 0.001 and x = 0.005% by Weight Eu3+)
TEM Characterization of an AS7G06 Alloy with Several Heat Treatments
Temperature Monitoring of Bearings in Railway Vehicles Using Infrared Thermography Technology
The Needle in the Haystack: The Role of New Advances in Correlative Light, Electron, Ion Beam and X-ray Microscopy in Finding, Imaging and Understanding Ever Fewer and Smaller Inclusions and Features in Steel
Three-dimensional Atomic Mapping of Ligands on Nanoparticles by Atom Probe Tomography
Ubim Fiber: Another Possible Reinforcement in Composites
Understanding 3D Volumetric Analysis of Active MOF Embedded in Thin Film Polymer
Use of Glass Waste as a Geopolymerization Reaction Activator for Ceramic Materials

Questions about ProgramMaster? Contact programming@programmaster.org