ProgramMaster Logo
Conference Tools for 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Symposium 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
Presentation Title Additive Manufactured Stainless Steel Nanocomposites with Uniform Dispersion of Nanoparticles
Author(s) Minglei Qu, Luis I. Escano, Khalid Hussain Solangi, Qilin Guo, Lianyi Chen
On-Site Speaker (Planned) Minglei Qu
Abstract Scope Metal matrix nanocomposites (MMNCs) with uniform distribution of nanoscale ceramic particles can show dramatically improved mechanical properties as compared to the matrix materials. However, when the size of the nanoparticles is small and the volume fraction of nanoparticles is high, it is very difficult to disperse them uniformly in the metal matrix. Here we report the dense stainless steel nanocomposites with uniform distributed ceramic nanoparticles were successfully fabricated by ball milling and selective laser melting (SLM). Detailed microstructure characterization and analysis reveal that the dispersion of nanoparticles in the SLMed sample strongly depends on the dispersion of nanoparticles in the feedstock powders. Our research provides a promising approach to manufacture MMNCs with uniform dispersion of nanoparticles by additive manufacturing process. This work was funded by the Department of Energy’s Kansas City National Security Campus which is operated and managed by Honeywell Federal Manufacturing Technologies, LLC under contract number DE-NA0002839.
Proceedings Inclusion? Definite: Post-meeting proceedings

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

‘Seeing’ the Temperature Inside the Part during the Powder Bed Fusion Process
30 Years of Additive Manufacturing and the Solid Freeform Fabrication Symposium
3D Characterizations of Internal Porosity and Surface Topology and Their Influence on Local Fracture Behavior in AM 316L Stainless Steel
3D Model Decomposition and Sequencing on 5-axis Hybrid Manufacturing Process
3D Printed Advanced Individualized Hearing Protection Devices for Sound Localization and Externalization Preservation
3D Printed Materials and Their Effects on Quasi-optical Millimeter Wave Guide Lens Systems
3D Printed Production Fixtures for the Automotive Electronic Manufacturing Industry
3D Printing Card
3D Printing of Compliant Passively Actuated 4D Structures
3D Printing of Metals with Xenon Flash Lamp
3D Printing of Polymers with Xenon Flash Lamp
3D Printing of Tungsten by Selective Laser Melting
4D Printing of Metals: A Demonstration in Copper Parts
A Comparative Study Between 3-Axis and 5-Axis Additively Manufactured Samples and Their Ability to Resist Compressive Loading
A Computational and Experimental Investigation into Mechanical Characterizations of Strut-based Lattice Structures
A Design Method to Exploit Synergies Between Fiber-Reinforce Composites and Additive Manufactured Processes
A Detection Method for Spatter Particles and Related Defects in Selective Laser Melting Process Using Neural Network on Images Produced by In-situ Monitoring
A Direct Metal Laser Melting System Using a Continuously Rotating Powder Bed
A Fast Heuristic for Determining Build Orientation to Minimize Thermal Distortion in Laser Powder Bed Fusion Additive Manufacturing
A Framework for Manufacturability Assessment and Minimum-order-machine Classification of Parts Fabricated by Additive-subtractive Processes
A Framework for the Performance Qualification of Additively Manufactured Parts under Multiaxial Loading Emulating In-service Conditions
A Framework to Streamline New Materials Implementation in Additive Manufacturing
A Fully Automated Design Pipeline for Mass Customisation of Personal Equipment via Additive Manufacture
A Hybrid Additive Manufacturing Framework for the Multi-phase Fabrication and In-line Characterization of Functional Devices
A Machine-agnostic Feedforward Controller for Commercial Powder Bed Fusion Systems
A Modeling-based Study of the Use of Additive Manufacturing for the On-demand Spare Part Supply
A Modified Inherent Strain Method with the Consideration of Transformation Induced Plasticity for Metal Additive Manufacturing Process
A Modified Multi-layer and Multi-track Cellular Automaton-finite Element Model (CAFE): 3D Grain Growth and Prediction of Cracking Incidence
A Mold Insert Case Study on Topology Optimized Design for Additive Manufacturing
A Multi-fidelity Gaussian Process Model for Melt Pool Prediction in Laser Powder Bed Fusion
A Multi-scale Computational Model to predict the performance of Cell Seeded Scaffolds with Triply Periodic Minimal Surface Geometries
A Part Strength Calculation Method for Thermoplastic Polymer Parts Produced by Material Extrusion AM
A Passive On-line Defect Detection Method for Wire and Arc Additive Manufacturing Based on Infrared Thermal Imager
A Practical Approach to Determine Optimal Heat Treatment Conditions for Additively Manufactured Parts
A Review on Powder Bed Fusion Additive Manufacturing of 18Ni-300 Maraging Steel
A Sensor Fusion Approach for In-situ Measurement of Metal Laser Powder Bed Fusion
A Software/hardware Framework for Mature Industrialisation of Directed Energy Deposition Additive Manufacture
A Standardized Framework for Communicating and Modelling Parametrically Defined Mesostructure Patterns
A Strategy to Determine the Optimal Parameters for Producing High Density Part in Selective Laser Melting Process
A Study of Pore Formation During Single Layer and Multiple Layer Build by Selective Laser Melting
A Thermoelastoplastic Energy and Mass Deposition Simulator for the Prediction of Residual Fields from Additive Manufacturing
A Time-efficient Analytical Model of Laser Directed Energy Deposition Process for Functionally Graded Materials Fabrication
A Universal Material Template for Multiscale Design and Modeling of Additive Manufacturing Processes
A Versatile, Multi-mode Liquid Metal Printing Platform for Microstructural Studies
Achieving More with Less: Design and Additive Manufacturing of Functionalities and Micro-architectures
Acoustic Monitoring for Defect Detection in Metal Powder-bed Laser Sintering
Acoustic Process Monitoring
Active Cooling of Direct Energy Deposition
Additive and Subtractive Electrohydrodynamic Jet Printing Behavior of Polymers for Patterning Area-selective ALD
Additive Manufactured Lightweight Vehicle Door Hinge with Hybrid Lattice Structure
Additive Manufactured Stainless Steel Nanocomposites with Uniform Dispersion of Nanoparticles
Additive Manufacturing In-Situ Information Modeling for Data Sharing and Analytics
Additive Manufacturing Materials Tested by Miniature Tensile Specimens
Additive Manufacturing of Aluminum Alloys by Laser Foil Printing
Additive Manufacturing of Bicontinuous Piezocomposites Based on Triply Periodic Cellular Micro-skeleton for Tailorable Hydrostatic Performance
Additive Manufacturing of Fatigue Resistant Materials: Avoiding the Early Life Crack Initiation Mechanisms during Fabrication
Additive Manufacturing of High-Gamma Prime Nickel-Based Superalloys through Selective Laser Melting (SLM)
Additive Manufacturing of Metallic Glasses: Challenges and Opportunities
Additive Manufacturing of New Structures for Heat Exchange
Additive Manufacturing of Porous Copper Wicking Structures for Heat Pipes and Vapor Chambers
Additive Manufacturing Simulation Comparison Using Commercial Tools
Additively Manufacturing Airfoil-like Shapes with Cold Spray
Advanced Applications for Zirconia Produced by NanoParticle JettingTM
Advancing Additive Manufacturing with Robotics Beyond 2.5D
Adventures in software-based cooking
Aerosol Jet Printing of Inductor Devices for Power Electronics
Alternative Approach on an In-situ Analysis of the Thermal Progression during the LPBF-M Process Using Welded Thermocouples Embedded into the Substrate Plate
An Aluminum-lithium Alloy Produced by Laser Powder Bed Fusion
An Automated Method for Geometrical Surface Characterization for Fatigue Analysis of Additive Manufactured Parts
An Empirical Study Linking Additive Manufacturing Design Process to Success in Manufacturability
An Experimental Study of Design Strategies for Stiffening Thin Plates under Compression
An Experimental Study on Selective Laser Melting of Tungsten: Effects of Substrate Material and Process Parameters
An Image-Guided Intrascaffold Cell Assembly Technique for Accurate Printing of Heterogeneous Tissue Constructs
An Interactive Exploration of Conceptual Design and Ideation for AM
An Investigation into the Stiffness Response of Lattice Shapes under Various Loading Conditions
An Open-architecture Multi-laser Research Platform for Acceleration of Large-scale Additive Manufacturing (ALSAM)
An Open Source Build Software and Controller Platform for Powder Bed Fusion Additive Manufacturing
An Overview of Design for AM
Analysis of Fatigue Crack Evolution Using In-situ Testing
Analysis of Layer Arrangements of Aesthetic Dentures as a Basis for Introducing Additive Manufacturing
Analysis of Porosity Formation and Meltpool Geometry in Directed Energy Deposition Using High-speed, In-situ Imaging
Analysis of Powder Removal Methods for EBM Manufactured Ti-6AL-4V Parts
Analysis of the Shielding Gas dependent L-PBF Process Stability by Means of Schlieren and Schadowgraph Techniques
Antibacterial Properties of 3D-printed Surfaces with Silver Coating
Application of a Fast-solving Analytical Melt Pool Model for Geometric and Microstructural Prediction
Application of Schlieren Technique in Additive Manufacturing : A Review
Application of the Fog Computing Paradigm to Additive Manufacturing Process Monitoring and Control
Applications of Supervised Machine Learning Algorithms in Additive Manufacturing: A Review
Applying Prediction Algorithms to Part Selection for Print Jobs and Production Floor Scheduling
Approach to Defining the Maximum Filler Packing Volume Fraction in Laser Sintering on the Example of Aluminum-filled Polyamide 12
Assessing the Corrosion Characteristics of Fe-based Alloys Prepared by Laser Powder Bed Fusion
Atom Probe Tomography Study of Second-phase Precipitates in Wire-arc Additive Manufactured Nickel Aluminum Bronze
Bead Characterization System (BCS) for Big Area Additive Manufacturing (BAAM)
Binder-jet 3D-printing process: Opportunities and Challenges
Binder Jet Printing of Metallic Components Using a Novel Hierarchical Binder Ink
Binder Jetting 3D Printer
Binder Jetting Additive Manufacturing of Ceramics: Effects of Particle Size on Powder Flowability and Resultant Mechanical Properties
Binder Jetting Additive Manufacturing of Ceramics: Simulation of Powder Spreading Process
Binder Jetting Additive Manufacturing of Copper/Diamond Composites
Binder Jetting Additive Manufacturing of Metals
Binder Jetting Additive Manufacturing Using Spray-Freeze-Dried Ceramic Granules
Binder Jetting of Metal Parts with Fine Powder Particles
Binder Saturation, Layer Thickness, Drying Time and Their Effects on Dimensional Tolerance and Density of Cobalt Chrome - Tricalcium Phosphate Biocomposite
Biodegradable Cellular Zinc Fabricated by Selective Laser Melting
Bioprinting with Stem Cells and Alginate-Gelatin Bioink Modified with Bioactive Glass
Build Orientation Optimization for Structural Performance Enhancement of Functionally Graded Conformal Lattice Structure Fabricated by Fused Deposition Modeling
Can Solderable Inks Increase Survivability for Resilient Electrical Connections?
Can We Control the Temperature History in Powder Bed Fusion? A Linear Systems Theory Study of the Powder Bed Fusion Process
Carbon Composite Engineered Lattice Structures Exhibiting Viscoelastic Behavior
Cellular and Topology Optimization of Beams under Bending: An Experimental Study
Cellular Automata Modeling of Alloy Solidification for Wide Ranges of Scan Pattern and Material Parameters in Selective Laser Melting*
Cellular Ceramics by Selective Laser Sintering
Ceramic On-demand Extrusion of Low Temperature Co-fired Ceramics
Characterisation of Austenitic 316LSi Stainless Steel Produced by Wire Arc Additive Manufacturing with Interlayer Cooling
Characterization of Distortion Compensation of Additively Manufactured Parts with Accurate Surface Representation
Characterization of Laser Direct Deposited Magnesium Aluminate Spinel Ceramics
Characterization of Metal-polymer Composites for In Situ Direct Ink Write Sensing Applications
Characterization of PLA/Lignin Biocomposites for 3D Printing
Characterization of Polymer Powders for Selective Laser Sintering
Characterization of the Balling Defect in Stainless Steels during Laser Powder Bed Additive Manufacturing
Characterization of Wire-arc Additive Manufactured Hybrid Nickel Aluminum Bronze-stainless Steel Bi-metals
Characterizing the Influence of Print Parameters on Porosity and Mechanical Performance
Chemical Kinetics of Reactive Silver Inks
Comparison of Fatigue Performance Between Additively Manufactured and Wrought 304L Stainless Steel Using a Novel Fatigue Test Setup
Comparison of Rotating-Bending and Axial Fatigue Behaviors of LB-PBF 316L Stainless Steel
Compressive and Bending Performance of Selectively Laser Melted AlSi10Mg Structures
Compressive Properties Optimization of Bio-inspired Sandwich Structures Fabricated by Selective Laser Melting
Compressive Response of Strut-reinforced Kagome Structure with Polyurethane Reinforcement
Computational Modeling of the Inert Gas Flow Behavior on Spatter Distribution in Selective Laser Melting
Computational Modelling with Experimental Validation of IN625 Powder Spreading and Melt Pool formation in the Laser Powder Bed Fusion Process
Computer-aided Process Planning for Wire Arc Directed Energy Deposition
Conceptual Design for Additive Manufacturing: Lessons Learned from an Undergraduate Course
Conditional generative adversarial networks for in-situ layerwise additive manufacturing data
Contact Angle Measurement Comparisons of Common Additive Materials and Processes
Creating Toolpaths without Starts and Stops for Extrusion-based Systems
Curing and Infiltration Behavior of UV-curing Thermosets for the Use in a Combined Laser Sintering Process of Polymers
Cyber Security through Side-channels: A Methodology for Implementing a Cyber-physical Hash on Additive Manufacturing Systems
Defect Detection in Metal Additive Manufacturing through Application of In-situ Diagnostics
Defect Identification in Additively Manufactured Parts Using the Modal Assurance Criterion
Defining Design Parameters for Large-scale Extrusion Additive Manufacturing Systems by Estimation of Interlayer Cooling Rates
Design and Manufacture of a Custom Drone Using Additive Manufacturing
Design for Additive Manufacturing in Developing Technologies. Feature Assessment Methodology
Design for Additive Manufacturing: Simplification of Product Architecture by Part Consolidation for the Lifecycle
Design for AM – The Key to the Industrialization of Additive Manufacturing
Design Optimization for Laser Metal 3D Printing
Design Paradigms for Vibration-enabled Support Structure Removal
Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing
Design Strategy for Additive Manufacturable, 3D Piezoelectric Nanocomposite
Design, Modeling and Characterization of Triply Periodic Minimal Surface Heat Exchangers with Additive Manufacturing
Developing Experimental Capabilities to Enhance Understanding and Performance of Metal Additive Manufacturing Processes
Development of a Circular 3S 3D Printing System to Efficiently Fabricate Alumina Ceramic Products
Development of a Standalone In-situ Monitoring System for Defect Detection in the Direct Metal Laser Sintering Process
Development of Functionally Graded Material Capabilities in Large-scale Extrusion Deposition Additive Manufacturing
Development of Implicit CAD System for Multi-material Additive Manufacturing
Development of In-line Surface Measuring Instrument for Additive Surface Finishing
Development, Production and Post-processing of a Topology Optimized Aircraft Bracket
Dimensional Analysis of Metal Powder Infused Filament - Low Cost Metal 3D Printing
Dimensional Comparison of a Cold Spray Additive Manufacturing Simulation Tool
Direct-writing by Micro-cold Spray of Yttria (Y2O3) Films for Reactive Metal Casting
Direct-writing SiC with Micro-cold Spray: Velocity Dependence on Film Density
Direct Fabrication of AlSi10Mg Thermal Management Devices onto Silicon Substrate by Selective Laser Melting
Distortion Prevention/support Elimination during Sintering of 3D Printed Copper Parts
Does Vat Polymerization Additive Manufacturing Influence Air Quality?
Drop on Demand Jetting of Molten 6061 Aluminum
Dynamic Build Bed for Additive Manufacturing
Dynamic Defect Detection in AM Parts Using FEA Simulation
Dynamic Measurement of Laser Beam Quality for Selective Laser Melting
Effect of Build Platform Preheating on Microstructure and Mechanical Properties of LB-PBF 316L Stainless Steel
Effect of Infrared Preheating on the Mechanical Properties of Large Format 3D Printed Parts
Effect of Nb Content on the Corrosion Resistance and Passive Film Composition of Ti-Nb Alloys Fabricated by Selective Laser Melting
Effect of Part Topology on Local Heat Transfer during Laser-Powder Bed Fusion
Effect of Particle Rounding on the Processability of Polypropylene Powder and the Mechanical Properties of Selective Laser Sintered Produced Parts
Effect of Position and Orientation on Surface Topography in Laser Powder Bed Fusion of Nickel Superalloy 625
Effect of powder chemical composition on microstructures and mechanical properties of L-PBF processed 17-4 PH stainless steel in the as-built and hardened-H900 conditions
Effect of Process Parameters on Selective Laser Melting Al2O3-Al Cermet Material
Effect of Sensitization and Etching Parameters to Selectively Dissolve Support Structures from PBF-processed Metal Components
Effective Elastic Properties of Additively Manufactured Metallic Lattice Structures: Unit-cell Modeling
Effective Moduli of Fused Filament Fabrication Material with Aligned Mesostructure
Effects of Different Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Ti-6Al-2Sn-4Zr-2Mo (Ti6242)
Effects of Different Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Ti-6Al-4V
Effects of Discrete Print Paths on the Stiffness and Strength of Topologically Optimized Structures
Effects of Layer Orientation on Mechanical Properties in Large Area Projection Sintering (LAPS)
Effects of Oxide Formation on Magnetohydrodynamic-based Drop-on-demand Aluminum Droplet Solidification and Coalescence
Effects of Particle Size Distribution on Surface Finish of Selective Laser Melting Parts
Effects of Printing Conditions on Cell Distribution within Microspheres during Inkjet Printing of Cell-laden Bioink
Effects of Spatial Energy Distribution on Defects and Fracture of LPBF 316L Stainless Steel
Effects of Unit Cell Size on the Mechanical Performance of Additive Manufactured Lattice Structures
Electrical and Mechanical Properties of Fused Filament Fabrication of Polyamide 6 / Nanographene Filaments at Different Annealing Temperatures
Electroforming Process to Additively Manufactured Microscale Structures
Electron Beam and Laser Hybrid Preheating Strategy for Powder Bed Fusion Process and Applications
Electrophotographic Multi-layer Powder Pattern Deposition for Additive Manufacturing
Elevated Temperature Mechanical and Microstructural Characterization of SLM SS304L
Embedding Distributed Fiber Optic Sensors in Components Manufactured via Laser Metal Deposition
Emissivity Mapping: A Method for Accurate Surface Temperature Measurements in Powder Bed Fusion Systems Using Infrared Thermography combined with Multi-wavelength Pyrometry
End-to-end Study of Microstructural Evolution and Defect Distribution for L-PBF IN78
Energy Absorption Measurement in Laser Deposition Additive Manufacturing
Engineered Platelets for Metals Additive Manufacturing
Enhancement of the Bonding Strength between Layers with Dissimilar Materials in Fused Filament Fabrication via Z-pinning Approach
Enhancing the Predictability of the Mechanical Performance of Additively Manufactured Conformal Negative Stiffness Honeycombs
Environmental Impact of 3D-printed 18Ni-300 Maraging Steel
Evaluation of a Feed-forward Laser Control Approach for Improving Consistency in Selective Laser Sintering
Exact Scan Pattern Dependent Thermo-mechanical Finite Element Simulation of Small Parts (50 mm^3) Produced Using Metal Powder Bed Fusion Process
Examination of the LPBF Process by Means of Thermal Imaging for the Development of a Geometric-specific Process Control
Experimental Investigation of Effect of Alginate-Methylcellulose Hydrogel Composition on Profile Accuracy of Bioprinted Constructs
Experimental Investigation of Fluid-Particle Interaction in Binder Jet 3D Printing
Experimental Investigation Of Stratasys J750 PolyJet Printer: Predictive Modeling of Color Accuracy
Experimental Investigation Of Stratasys J750 PolyJet Printer: Predictive Modeling of Color Accuracy
Experimental Validation of the Thermal Distribution Predicted by the Graph Theory Approach: Application to Laser Powder Bed Fusion
Exploration of a Cable-Driven 3D Printer for Concrete Tower Structures
Exploration of Reactive Extrusion in Additive Manufacturing
Exploring Additive Manufacturing Techniques in Creating a Model Aircraft
Exploring the Process Structure Relationship for Laser Powder Bed Fusion of Bismuth Telluride
Exploring the Use of Artificial Neural Network Machine Learning for Process Quality Evaluation of Powder Bed Fusion in Additive Manufacturing of Lightweight Structures
Extrusion-based 3D Printing of Biomass Materials for Construction
Fabricating Optimized Composite Structures via Multi-axis Material Extrusion
Fabrication and Characterization of 3D Printing Induced Orthotropic Functional Ceramics
Fabrication and Characterization of High-Purity Alumina Ceramics Doped with Zirconia via Laser Direct Deposition
Fabrication of Three-dimensional Structured Ti-6Al-4V/TiN Metal Matrix Composite in Laser Powder Bed Fusion Using Selective Laser Nitriding
Failure Detection of Fused Filament Fabrication via Deep Learning
Fast and Simple Printing of Graded Auxetic Structures
Fatigue Behavior of Additive Manufactured 304L Stainless Steel Including Surface Roughness Effects
Fatigue Behavior of Laser Beam Directed Energy Deposited Inconel 718 at Elevated Temperature
Fatigue Behavior of LB-PBF Ti-6Al-4V Parts Under Mean Stress and Variable Amplitude Loading Conditions
Fatigue Behavior of Post-build Surface Processing on Electron Beam Melted Ti-6Al-4V
Fatigue Crack Growth Threshold Effects of Texture, Microstructure, and Residual Stress in SLM Alloy 718
Fatigue Life Prediction of Additive Manufactured Materials Using a Defect Sensitive Model
Fatigue Performance of Additively Manufactured Stainless Steel 316L for Nuclear Applications
Fatigue Performance of Stainless Steel 316L Fabricated by Extrusion-based Additive Manufacturing
Feasibility Analysis of Using Maraging Steel in a Wire Arc Additive Process for High-Strength Tooling Applications
Feasibility of On-line Defect Detection with Current Thermal Tomography Techniques
Fiber Fed Laser Heated Additive Manufacturing of Glass
Finite Element Process Simulation Technology for Additive Manufacturing
Forging Made Possible-hybrid Casting Forging and Milling Technology
Formation of Nitride and Carbide Compounds via Laser Synthesis
Framework for CAD to Part of Large Scale Additive Metals Manufacturing in Arbitrary Directions
Freeform Extrusion Fabrication of Alumina and Zirconia Functionally Graded Materials
Frequency Inspection of Additively Manufactured Parts for Layer Defect Identification
Functionally-graded Lattice Infill Design Optimization for Laser Powder Bed Fusion
Funding Opportunities for Advanced Manufacturing at the National Science Foundation
Gaining New Insight into Metal Additive Manufacturing Processes Using Ontologies and Visualization
Glass-reinforced, Recycled PET Material as Feedstock for Fused Filament Fabrication
Glass Laser Additive Manufacturing Start and Stop Investigation
Glass to Metal Seals by Additive Manufacturing
Glocal Integrity Formation in Hybrid Additive Manufacturing
Graded Multimaterial Printing via L-PBF: Design, Development, and Characterization of AISI 316L and Fe35Mn Graded Specimens
Green Bio-printing: An Investigation of Suitable Bio-inks to Support Plant Tissue Growth
Guided Cell Migration on a Substrate with Graded Micropillars
Heterogeneous Sensing-based In-process Quality Monitoring of Single-tracks Built using Laser Powder Bed Fusion Additive Manufacturing Process
High-resolution Metal Printing by Discrete Ejection, Melting, and Deposition of Microparticles
High Definition Scanning for Build to Build Feedback in PBFAM
High Rate Monitoring of Laser Motion and Melt Pool Dynamics during Laser-powder Bed Fusion
How AM Parts Fail: Influence of Build Orientation and Post Machining
How Powders Incorporate into the Melt Pool in Deposition: An In-situ Study on Powders Overcoming the Melt Pool Surface Tension
Hybrid Additive Manufacturing for Embedded Wire Interconnections in 3D Printed Thermoplastics
Hybrid Manufacturing: Role of Contoured Geometries in Directed Energy Deposition of Stainless Steel 316L
Hybrid Material Extrusion with Multi-process Technologies
Hydrothermal-assisted Powder Bed Fusion of Ceramics for Achieving High Green Density
Identifying the Formation of Laser Powder Bed Fusion Defects In-situ by Coupling High Speed X-ray and Infra-fed Imaging
Imaging and Analysis of Binder-powder Interactions in Metallic Binder Jet Printing.
Impact Energy Absorption Ability of Thermoplastic Polyurethane (TPU) Cellular Structures Fabricated via Powder Bed Fusion
Impact of BAAM Parameters on Material Meso-structure and In-process Printing Mechanical Stability
Impact of Embedding Cavity Design on Thermal History between Layers in Polymer Material Extrusion Additive Manufacturing
Impact of Flow Aid on the Flowability and Coalescence Behavior of Polymer Laser Sintering Powder
Impact Strength of 3D Printed Polyether-ether-ketone (PEEK)
Implementation of 3D Printer in Material Processing Lab Course: An Educational Paper
Implementation of Spectropyrometry within Electron Beam Powder Bed Fusion for Accurate Surface Temperature Measurements
Improving the Strength of Additively Manufactured Concrete Structures via Intra and Inter-layer Fiber Reinforcement
Improving the Strength of Binder Jetted Pharmaceutical Tablets through Tailored Polymeric Binders and Powders
In-direct Hybrid AM: Advancing Metal Castings via 3D Sand-printing
In-plane Pure Shear Deformation of Cellular Materials with Novel Grip Design
In-Process UV-Curing of Pasty Ceramic Composite
In-situ Full-field Mapping of Melt Flow Dynamics in Laser Metal Additive Manufacturing
In-situ Laser Excited Frequency Response of Additive Manufactured Parts
IN-SITU LAYER-WISE QUALITY MONITORING FOR LASER-BASED ADDITIVE MANUFACTURING USING IMAGE SERIES ANALYSIS
In-situ Local Part Qualification of SLM 304L Stainless Steel through Voxel Based Processing of SWIR Imaging Data
In-situ Residual Stress Determination in Laser Powder Bed Fusion Using a Residual Stress Dynamometer
In-Situ Ultrasonic Quality Inspection for Metallic Additive Manufacturing
In Situ Combination of Selective Laser Melting and Selective Laser Erosion for Edge Effect Removal
Increasing the Interlayer Bond of Fused Filament Fabrication Samples with Solid Cross-sections Using Z-pinning
Industrialization of Laser Wire Directed Energy Deposition for Large Ti 6-4 Aerospace Components
Industrializing the Robotized Laser Wire-feed Metal Additive Manufacturing (LWMAM) From 3-D Model to NNS Component
Influence of Build Temperatue on LBM of Tungsten
Influence of Contour Procedures on Surface Improvement of Additive Manufactured Components
Influence of Drop Velocity and Droplet Spacing on the Equilibrium Saturation Level in Binder Jetting
Influence of Impacting Particle Size and Stacking Fault Energy on Ag Films Deposited by Direct Writing
Influence of Part Microstructure on Mechanical Properties of PA6x Laser Sintered Specimens
Influence of Powder Particle Size Distribution on the Printability of Pure Copper for Selective Laser Melting
Influence of the Process Parameters and Feature Geometries on Material Characteristics of Ti-6Al-4V Thin Strut Features Fabricated by Laser Powder Bed Fusion Additive Manufacturing
Inkjet Printing of Geometrically Optimized Electrodes for Lithium-Ion Cells: A Concept for a Hybrid Process Chain
Integrated Hardfacing of Stellite-6 Using Hybrid Manufacturing Process
Integration Challenges with Additive/subtractive In-envelope Hybrid Manufacturing
Interrogation of Mid-build Internal Temperature Distributions within Parts Being Manufactured via the Powder Bed Fusion Process
Inverse Metrology Approach: Using Simulations to Understand Process Monitoring in Laser-based Additive Manufacturing
Investigating Applicability of Surface Roughness Parameters in Describing the Metallic Additive Manufacturing Process
Investigating the build consistency of a laser powder bed fused nickel-based superalloy, using the small punch technique
Investigating the Gap Between Research and Practice in Additive Manufacturing
Investigating the Porosity Formation Mechanism in Electron Beam Melted Hydride-Dehydride (HDH) Ti-6Al-4V via Synchrotron X-ray Microtomography and Dynamic X-ray Radiography (DXR)
Investigating the Production of Gradient Index Optics by Modulating Two-photon Polymerisation Fabrication Parameters
Investigating Transient Pressure Variations during Extrusion-based Additive Manufacturing
Investigation and control of weld bead at both ends in WAAM
Investigation of Aluminum Cerium Alloy Laser Melting Dynamics under Additive Manufacturing Conditions
Investigation of Effect of Heat Treatment Process on PVDF Additively Manufactured Parts
Investigation of Mechanical Properties and Dimensional Accuracy of an UV-curable Silicone Printed with DLP
Investigation Of PBFAM Flaw Formation through High-speed Video Monitoring
Investigation of the Oxygen Content of Additively Manufactured Tool Steel 1.2344
Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to Weld Seam Strength
Investigations on the Effect of Powder Bed Fusion Processing Parameters on Optical Emissions and Final Part Quality Based on Single Track Deposits
Issues Related to Powder-bed Electron Beam Additive Manufacturing
Joining of Copper and Stainless Steel 304L Using Direct Metal Deposition
Lab-designed Laser-based 3D Printer
Large-Scale Additive Manufacturing of Concrete Using a Six-axis Robotic Arm for Autonomous Habitat Construction
Large-scale Identification of Parts Suitable for Additive Manufacturing: An Industry Perspective
Large-scale Thermoset Pick and Place Testing and Implementation
Large Area Projection Sintering (LAPS) for Low Porosity Nylon 12 Parts
Large Effect of Surface Oxide on Measurement of Liquid Metal Viscosity
Large Scale Metal Additive Manufacturing Using Hot-wire Laser Metal Deposition
Laser-assisted surface defects and pore reduction of additive manufactured titanium parts
Laser-foil-printing Additive Manufacturing of Multi-material Components from 304L Stainless Steel to Ti-6Al-4V Alloy with V Intermediate Layers
Laser-vapor Interaction Dynamics during Multi-beam Laser Powder Bed Fusion
Laser Additive Manufacturing of Dissimilar Metals for Nuclear Reactor Applications
Laser Powder Bed Fusion of AlSi10Mg Powders with Narrow Particle Size Distribution
Laser Sintering of Pine/Polylactic Acid Composites
Lattice Metamaterial Design for Enhanced Stretchability and Energy Dissipation via Topology Optimization
Launching a Multidisciplinary Resident+Online Graduate Degree Program in Additive Manufacturing and Design: Challenges and Lessons Learned
Layer-wise Anomaly Detection and Process Control Using a Machine-agnostic Algorithm for Semantic Segmentation of Powder Bed Images
Layered Assembly: Digital Fabrication of Voxel-based Multi-material Parts
Learning Design for Additive Manufacture through Competition: The 3rd Annual 3D Printed Aircraft Competition
Linear Friction Welding of Additive Manufactured Parts
Local Microstructure and Mechanical Properties Analysis of SLM 304L Stainless Steel
Machine Learning Assisted Control of Melt Pool Geometry in Nickel-based Superalloys under Constrained Computational Resources
Machine Learning Based Monitoring of Advanced Manufacturing
Manufacturing and Application of PA11-glass Fiber Composite Particles for Selective Laser Sintering
Manufacturing Development For Army Relevant Ultra-high Strength Steel
Manufacturing of Nanoparticle-filled PA11 Composite Particles for Selective Laser Sintering
Manufacturing Process and Parameters Development for Water-atomized Zinc Powder for Selective Laser Melting Fabrication
Mapping Melt Pool Thermal Characteristics to Varying Scan Strategies and Porosity in Laser Powder Bed Fusion
Material-structure-property Optimization and In-process Monitoring of 3D Printed Bone Tissue
Measurement and Analysis of Pressure Profile Within Big Area Additive Manufacturing Single Screw Extruder
Measurement of Energy Transfer and Balance in Laser-induced Melt Pool
Mechanical and Electrical Properties of Selective Laser Melted Carbon Mixed Copper and Copper-chromium Alloy
Mechanical Behavior of Additively-manufactured Gyroid Lattice Structure under Different Heat Treatments
Mechanical Metamaterial Development for 3D Discriminatory Logic Systems
Mechanical Performance of Additively Manufactured Fibre-reinforced Functionally Graded Lattices
Mechanical Performance of Laser Sintered Poly(ether ketone ketone) (PEKK)
Mechanical Properties Enhancement of Additively Manufactured Ti-6Al-4V by Machine Hammer Peening
Mechanical Properties of Selective Laser Melting IN718 Subjected to Experimental Hot Isostatic Pressing Cycles
Melt Flow Characterization of Filaments Used in Fused Filament Fabrication Additive Manufacturing
Melt Pool Geometry Modeling and Monitoring via In-situ Vision System for Powder Fed Laser Fusion Process
Melt Pool Measures and Effective Sensor Bandwidth for Direct Energy Deposition
Melt Pool Monitoring for Control and Data Analytics in Large-scale Metal Additive Manufacturing
Melting mode thresholds in laser powder bed fusion and their application towards process parameter development
Metal Casting Applications Using Zirconia Molds Produced by NanoParticle JettingTM
Metallurgical and Mechanical Characterizations of AINSI 316L Parts Produced by WAAM and LWAM
Method for Determining Light Intensity in Large Area Projection Sintering (LAPS)
Methodical Design of a 3D-Printable Orthosis for the Left Hand to Support Double Bass Perceptional Training
Microstructure and Mechanical Properties of Nickel Superalloys and Ti6Al4V Fabricated Using a Renishaw’s Multi-laser Powder Bed Fusion System (Moved from 8/14 @ 4 PM)
Microstructure and Tensile Properties of Hybrid Additive/subtractive Manufactured Al5Si Alloy
Microstructure, Surface Roughness and Dimensional Accuracy for As-built Thin Wall Inconel 718 with Laser Powder Bed Fusion
Mitigating Near-surface Porosity in a Laser Powder Bed Fusion Process
Mitigating Residual Stress and Distortion in Additive Manufacturing by Topology Optimization of Latticed Support Structures
MMHT Based In-situ Process Monitoring and Fault Detection in Additive Manufacturing
Modeling of the Vapor Plume and Its Interaction with Ambient Gas and Powder in the PBF-LB\M Process
Modeling Thermal Expansion of a Large Area Extrusion Deposition Additively Manufactured Parts Using a Non-homogenized Approach
Modelling for the Tensile Fracture Characteristic of Cellular Structures under Tensile Load with Size Effect
Modelling of Binder-powder Interactions for the Improvement of Part Density in Binder Jet Printing
Multi-material Direct Energy Deposition for Custom Alloy Compositions
Multi-material Process Planning for Additive Manufacturing
Multi-material Soft-matter Robotic Fabrication: A Proof of Concept in Patient-specific Neurosurgical Surrogates
Multi-Objective Topology Optimization of Additively Manufactured Heat Exchangers
Multi-sensor Approach to Determine the Effect of Parameters and Geometry in Laser Powder Bed Fusion
Multiphysics Simulation of Generated Heat in Photopolymerization and its Potential Effects on Curing System
Mylar Capacitor Edge Margin Reduction Using Robust Dielectric
Nested Size Effects Observed in Nanoindentation Studies of Additively Manufactured 316L Stainless Steel
New Opportunities for Additive Manufacturing by Selective Electron Beam Melting
New Scanning Strategies and Support Structures for Reduced Overheating on Downfacing Regions of Direct Metal Printed Parts
Nonlinear Model Predictive Control of UV-induced Curing Process of Thick Composite Parts
Nozzle-integrated Pre-deposition and Post-deposition Heating of the Platform Bed in Polymer Based Additive Manufacturing
Numerical and Experimental Investigation of Interfacial Fluid-particle Flow in Binder Jet 3D Printing
Numerical Investigation of Extrusion-based Additive Manufacturing for Process Parameter Planning in a Polymer Dispensing System
Numerical Modeling and Evaluation of Material Jetting-based Additive Manufacturing
Numerical Simulation of the Temperature History for Plastic Parts in Fused Filament Fabrication (FFF) Process
On the Heat Treatments of a Carbon Steel for Gear Applications
On the Influence of Process Interruptions during the SLM Process on the Fatigue Resistance of AlSi12
On the Physical Characteristics of 3D Printed Sand for Metal Casting Tooling
One-step, Direct Write Aerosol Impact Consolidation Method for Fabricating Thin Films of TiO2 on Glass
OPTIMIZATION OF THE ADDITIVE MANUFACTURING PROCESS FOR GEOMETRICALLY COMPLEX VIBRO-ACOUSTIC METAMATERIALS
Optimizing the Tensile Strength for 3D Printed PLA Parts
Out-of-plane Printing with Big Area Additive Manufacturing
Overview of In-situ Temperature Measurement for Metallic Additive Manufacturing: How and then What
Parallelizing Energy Deposition for Powder Bed Additive Manufacturing via a 2D-Laser Array
Parameter Optimization of AlSi10Mg Alloy System in 200W Direct Metal Laser Sintering Process
Parametric Analysis to Quantify Process Input Influence on the Printed Densities of Binder Jetted Alumina Ceramics
Parametric Study of In Situ Melt Pool Dynamics and Microstructure of WE43 Processed by Laser Powder Bed Fusion
Part-level Thermal Modeling in Additive Manufacturing Using Graph Theory.
Part-scale Coupled Process-microstructure Model for Additive Manufacturing of Nickel Alloy
Part Remanufacturing Using Hybrid Manufacturing Processes
Particle Trajectories, Focusing, and Fragmentation in Supersonic Aerosol Deposition
Paste-based 3D Printing of Metallic Materials: Effect of Binders and Precursor Sizes
PENELOPE: A New Solution for In-situ Monitoring and Defect Removal in L-PBF
Penetration Performance of Additively Manufactured Ultra High Strength Steel Fragment Simulating Projectiles
Permeability Analysis of Polymeric Porous Media Obtained by Material Extrusion Additive Manufacturing
Phase-field Simulation of Solidification Morphology in Laser Powder Deposition of Ni-based Binary Alloys
PLLA-infused Citric Acid-based Bioresorbable Vascular Scaffolds 3D Printed via microCLIP
Polymer Welding of 3D Printed Hybrid Flexible Electronics for Patient-specific Wearables and Orthotics
Porosity analysis and pore tracking of metal AM tensile specimen by Micro-CT
Post-processing Heat Treatments and Residual Stress Behavior of AlSi10Mg
Powder Stream and Melt-pool in Laser-based Powder Deposition Process for Additive Manufacturing
Powder Variation and Mechanical Properties for SLM 17-4 PH Stainless Steel
Pre-treatment of Fused Deposition Modeling (FDM) Filament for Improved Interfacial Layer Adhesion Using an Atmospheric Pressure Plasma Discharge
Predicting and Controlling the Thermal Part History in Powder Bed Fusion Using Neural Networks
Predicting Porosity in Laser-based, Additively Manufactured 316 Stainless Steel Using the Multiphysics Discrete Element Method
Prediction and Control of Melt Pool Geometry in Additive Manufacturing Processes: A Machine Learning Based Approach
Prediction of Mechanical Properties of Fused Deposition Modeling Made Parts Using Multiscale Modeling and Classical Laminate Theory
Preliminary Study on Hybrid Manufacturing of the Electronic-Mechanical Integrated Systems (EMIS) via the LCD Stereolithography Technology
Pressure Dependence of the Laser-material Interaction under High Speed Welding and Laser Powder Bed Fusion Conditions Probed by in Situ X-ray Imaging
Printability of Metallic Alloys in Laser Powder Bed Fusion Process
Printing SiO2 Dielectrics Using Reactive Inks at Low Temperature
Process-concurrent Visual Inspection of Glass Laser Additive Manufacturing Deposition Products
Process-structure-property Relationships in the Coating of Stellite on Inconel 718 by Directed Energy Deposition Process
Process Integrated Production of WC-Co Tools with Local Cobalt Gradient Fabricated by Binder Jetting
Process Mapping for Laser Hot Wire Additive Manufacturing
Process Parameter Induced Lack of Fusion Defects in AlSi10Mg
Process Parameter Optimization in Powder Bed Fusion for Polyphenylene Sulfide through Design of Experiments
Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components
Process Plateaus, Not Peaks, in Laser-powder Bed Fusion of 316L Stainless Steel
Process Routes Towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
Processing and Characterization of 3D-printed Polymer Matrix Composites Reinforced with Discontinuous Fibers
Production of Geometrically Complex Glass Parts Using Indirect Selective Laser Sintering
Pyrometry Linked to Voids in Additively Manufactured Metals: SAND2019-4035 A
Quantification of Metal Powder Layer Uniformity for Additive Manufacturing Using Transmission X-ray Imaging
Quantitatively Revealing the Dynamics in Laser Additive Manufacturing Processes by High-speed Synchrotron X-ray Imaging and Diffraction
Rapid Solidification Microstructure of Binary NiNb during Laser Powder Bed Fusion: Non-equilibrium Phase Field Modeling and Experimental Validation
Reactive Infiltrant for Binder Jet 3D Printed Ceramics
Reactive Inkjet of Quantum Dot – Silicone Composites
Reactive Powder Bed 3D Printing – A New Paradigm in Materials and Scalability?
Real-time 3D Surface Measurement in Additive Manufacturing Using Deep Learning
Real Time Observation of Binder Jetting Printing Process Using High-speed X-ray Imaging
Realization of the P20 Tool Steel and Mild Steel for Building Composite Die through Hybrid Layered Manufacturing Process
Recent Advances in Direct-write Additive Manufacturing of Thermoset Composites
Reconditioning 304L Stainless Steel Powder through Plasma Spheroidization for Use in the Selective Laser Melting Process
Recyclability of Polyphenylene Sulfide Powder in Laser Powder Bed Fusion
Reducing Computer Visualization Errors for In-process Monitoring of Additive Manufacturing Systems Using Smart Lighting and Colorization System
Reduction Expansion Synthesis of Designed Metal Parts
Refinement Technique for Robotically Path-planned Functional Gradients
Relationship Between Powder Bed Temperature and Microstructure of Laser Sintered PA12 Parts
Relative Significance of Heat Loss through Radiation and Convection in Extrusion Based Additive Manufacturing
Repair of High-value Plastic Components Using Fused Deposition Modeling
Replicate, Adapt, Optimize: A Crawl, Walk, Run Approach to Design for Additive Manufacturing
Residual Heat Based Laser Power Adjustment for Additive Manufacturing Process
Residual Stress Induced Fracture of Additive Manufactured Parts Based on Modified Inherent Strain Method
Residual Stresses Measurements in Hybrid Additive Manufacturing
Revealing Particle-scale Powder Spreading Dynamics in Powderbed-based Additive Manufacturing Process by High-speed X-ray Imaging
Rheological and Cure Behavior of a Dual-cure Thermoset For DIW
Rheology and Applications of Particulate Composites in Additive Manufacturing
Robot-based Hybrid Manufacturing Process Chain
Roughness Parameters for Classification of As-built and Laser Post-processed Additive Manufactured Surfaces
Scan-by-scan Thermal Modeling for Defect Prediction at the Part Scale
Selection Considerations of Orthopedic Implants for Electron Beam Melting Production
Selective Electron Beam Melting of Al-Cu-Mg Alloy: Microstructure Characterization and Mechanical Performance
Selective Laser Flash Sintering of Aluminum Nitride
Selective Laser Flash Sintering of Yttria-Stabilized Zirconia
Selective Laser Melted 316L Stainless Steel Processing and Microstructure Effects on Local and Bulk Thermal Conductivity
Selective Laser Melting Fabrication of Fully Dense Ultra-high Strength Martensitic Steel
Selective Laser Melting of Aluminum-ceramic Composites
Self-powered Hydrophone with Broadband Frequency and Rationally Designed Directivity Pattern via 3D Printing Using Piezoelectric Metamaterials
Sensor Based Prediction of Material Defects
Simulated Effect of Laser Beam Quality on the Robustness of Laser-based AM System
Simulating Droplet Break-up in Liquid Metal Printing Processes
Simulating Powder Spreadability in the Selective Laser Melting Process Using the Discrete Element Method
Simulation of Hybrid WAAM and Rotation Compression Forming Process
Simulation of Mutually Dependent Polymer Flow and Fiber Filled in Polymer Composite Deposition Additive Manufacturing
SkyBAAM Large Scale Fieldable Deposition Platform System Architecture
Smart Metal Structures with Embedded Strain Sensing Enabled by Hybrid Manufacturing
Spatially Resolved Particle Size Distribution and Morphological Characterization of Powder Ejecta Created by the Laser Powder Bed Fusion Process
Spatter in Laser Powder Bed Fusion: The Good, the Bad and the Ugly
SS410 Process Development and Characterization
Stereolithography of Natural Rubber Latex, a Highly Elastic Material
Strengthening of 304L Stainless Steel by Addition of Yttrium Oxide and Grain Refinement during Selective Laser Melting
Stress and Deformation Evaluation of Novel Toolpath in Powder Bed Fusion Process
Stress Corrosion Cracking of an Additively Manufactured Austenitic Stainless Steel
Structural Modification Induced by Laser Processing of Thermoelectric Materials
Structure-property Relationships in HIP Additively Manufactured Thermoplastic Composites
Study of Printing Direction, Post-processing Effects on Mechanical and Material Properties of EOS MS1 Maraging Steel
Study on the Formability, Microstructures and Mechanical Properties of AlCrCuFeNix High-entropy Alloys Prepared by Selective Laser Melting
Study on the Selective Laser Sintering of Thermoplastic Polyurethane/Nd-Fe-B Composites Powder
Subject Specific Bone Biomodel 3D Printing from a Ster-saccharide Polymerization Powder-infiltrant Formulation
Supersonic Cold Spraying for Advanced Materials: Scalable Direct Writing Deposition Method
Surface Conditioning for Additively Manufactured Titanium Implants for Temporary Insertion in the Oral and Maxillofacial Surgery
Surface Damage of an AM-AlSi10Mg Alloy Exposed to Corrosive Environments with Lack of Fusion Defects and Powder Contamination
Surface Roughness Characterization in Laser Powder Bed Fusion Additive Manufacturing
Tailored Modification of Flow Behavior and Processability of Polypropylene Powders in SLS by Fluidized Bed Coating with in Situ Plasma Produced Silica Nanoparticles
Tailoring Microstructure through Beam Shaping
Tailoring Physical Properties of Shape Memory Polymers for FDM-type Additive Manufacturing
Targeted Algorithms for Defect Mitigation in Selective Laser Melting
Technique for Processing of Continuous Carbon Fibre Reinforced PEEK for Fused Filament Fabrication
Tensile and Compression Test for Specimens Developed Using an Algorithm of Path Optimization
Tensile and Fatigue Properties of Ti6Al4V Fabricated Using a Renishaw’s 500Q Powder Bed Fusion System
Tensile Property Variation with Wall Thickness in Selective Laser Melted Parts
Tensile Strength of Ti-6Al-4V from Interlayer Milling during LENS Deposition
The Development Status of the National Project by Technology Research Association for Future Additive Manufacturing (TRAFAM) in Japan
The Digital Twin in Metal Additive Manufacturing – A Paradigm Integrating Modeling, Sensing, and Machine Learning for Defect Prediction.
The Effect 4D Printing Infill Patterns on the Shape Memory Effect of Shape Memory Polymers
The Effect of Cell Size and Surface Roughness on the Compressive Properties of ABS Lattice Structures Fabricated by Fused Deposition Modeling
The Effect of Laser Welding Modes on Mechanical Properties and Microstructure of 304L Stainless Steel Parts Fabricated by Laser-foilprinting Process
The Effect of Particle Size on Powder Flowability and Mechanical Behavior of Ceramic Samples fabricated by Binder Jetting Additive Manufacturing
The Effect of Primary Process Parameters on Porosity Population Characteristics in Alloy 718
The Effect of Print Speed on Surface Roughness of Parts Produced Using Binder Jet 3D Printing
The Enriched Analytic Solution Method for Thermal Modeling of Laser-based Additive Manufacturing Processes
The Five-axis 3D-printing of Carbon Fiber Reinforced Composites
The Impact of Porosity on the Mechanical Properties of 304L Stainless Steel Fabricated by Selective Laser Melting
The Impact of Thermal Processing Conditions on Mechanical Strength and Dimensional Accuracy for Fused Filament Fabrication of Ultem 1010
The Influence of Cellular Sub-grain Microstructure on Mechanical Deformation: An Experimental Investigation
The Investigation of Process Parameters on the Structural Integrity of an Additively Manufactured Nickel-based Superalloy
The Mechanism of Cellular Sub-grain Microstructure Formation in Additively Manufactured (AM) 316L Alloy: A Computational Study
The Porosity and Mechanical Properties of H13 Tool Steel Processed by High-speed Selective Laser Melting
The Study of Conductivity of Silver Lines Over a Large Surface Area with Aerosol Jet Printing
The Tribological Performance of SLM 316L Stainless Steel under Dry Sliding Conditions
Then, Now, and What's Ahead
Thermal Analysis of 3D Printed Continuous Fiber Reinforced Thermoplastic Polymers for Automotive Applications
Thermal Analysis of Thermoplastic Materials Filled with Chopped Fiber for Large Area Printing
Thermal Boundary Conditions in Finite Element Modeling of Laser Powder Bed Fusion
Thermal Process Monitoring for Wire-arc Additive Manufacturing using IR Cameras
Thermal Properties Characterization of Metal Nanoparticles Using Transient Thermoreflectance Technique
Toolpath analysis of void formation in PBFAM Ti-6Al-4V
Topology Optimization Case Study of a Military Vehicle Door Hinge to Produce a Replacement Part Using Additive Manufacturing
Topology Optimization for Anisotropic Thermomechanical Design in Additive Manufacturing
Topology Optimization of a Satellite Component for Additive Manufacturing
Topology Optimization of Lattice Structure Unit Cell for Convective Heat Transfer Applications
Topology Optimization of Support Structures Considering the Distortion Minimization in Laser Powder-bed Fusion Additive Manufacturing
Towards a Micromechanics Model for Continuous Carbon Fiber Composite 3D Printed Parts
TOWARDS FUNCTIONALLY GRADED SAND MOLDS FOR METAL CASTING: CONTROLLING THERMO-MECHANICAL PROPERTIES VIA 3D SAND-PRINTING PROCESSING CONDITIONS
Towards Real-time NDT with Hyperspectral X-ray Data
Towards the Real-time Control - A Meltpool Prediction Based Scan Strategy
Towards Volumetric Manufacturing of Ceramics via Microwave Holography
Types of Spatters and Their Features and Formation Mechanisms in Laser Powder Bed Fusion Additive Manufacturing Process
Ultrasonic Embedding of Continuous Carbon Fiber into 3D printed Thermoplastic Parts
Understanding the Influence of Energy-density on the Layer Dependent Part Properties in Laser-sintering of PA12
Unlocking Technology for AM Mass Production Trends
Use of 3D Printed Molds for Foam in Place Prototyping Cost and Time Reduction for Optimization in DFM/A
Use of Non-spherical Hydride-DeHyride (HDH) Powders in Powder Bed Fusion Additive Manufacturing
Using Heterogeneous In-process Sensor Data To Detect Lack-of-fusion Defects In Directed Energy Deposition Of Titanium Alloy (Ti-6Al-4V) Parts
Using Machine Learning to Guide Alloy Design and Compatibility with Directed Energy Deposition
Using Non-gravity Aligned Welding in Large Scale Additive Metals Manufacturing for Building Complex Parts
Using Parallel Computing Techniques to Algorithmically Generate Voronoi Support and Infill Structures for 3D Printed Objects
Using Wax Filament Additive Manufacturing For Low-volume Investment Casting
Validated Computational Modelling Techniques for Simulating Melt Pool Ejecta in Laser Powder Bed Fusion Processing
Validating Thermographic Testing in Fused Deposition Modeling
Variation of Microstructure, Phase Formation and Hardness in Laser Powder Bed Fusion Inconel 718 Cuboids
Vat Photopolymerization of Latex: Decoupling Viscosity and Molecular Weight to Enable Additive Manufacturing of Performance Elastomers
VERY HIGH CYCLE FATIGUE BEHAVIOR OF LASER BEAM-POWDER BED FUSED INCONEL 718
Volumetric Sintering of a Selectively Doped, Functionally Graded Powder Bed
Wearable Electronics
Weighing the Evidence: Origins and Mechanisms of Cellular Substructure in Additively Manufactured 316L
Wet-chemical Support Removal for Additive Manufactured Metal Parts
Wire-arc Additive Manufacturing: Invar Deposition Characterization
Wire Co-extrusion with Big Area Additive Manufacturing
X-ray Diffraction Stress Measurement and Comparison for Various Raster Path in Laser Powder Bed Fusion (LPBF)

Questions about ProgramMaster? Contact programming@programmaster.org