|About this Abstract
||2016 TMS Annual Meeting & Exhibition
||Thermodynamic Applications, Optimizations and Simulations in High-Temperature Processes: An EPD Symposium in Honor of Christopher W. Bale's 70th Birthday
||NN-11: The Confirmation of Simulation Parameter and Analysis of Temperature Field of 430 Ferrite Stainless Steel in Water-cooling Condition with 3D-CAFE Method
||Peixiao Liu, Yanxiang Li, Hanjie Guo, Ruipeng Pang
|On-Site Speaker (Planned)
Under water cooling condition, the solidification structure is almost equiaxed grains, and the diameter of equiaxed grains is 0.5 mm~1mm, columnar grains are relative small, columnar grain width is only a few tenths of millimeters, with the length is 0.5 mm~1.5 mm. When the top heat transfer coefficient is 100 W/ (m2 K), and the around and the bottom heat transfer coefficient are 2000 W/ (m2 K)respectively, the solidification structure of the simulation computation is basically with experiment. the casting formed a symmetrical temperature field along the longitudinal section during solidification, the casting top grey area is solidifying contraction.
||Planned: TMS Journal: Metallurgical and Materials Transactions