ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Materials and Chemistry for Molten Salt Systems
Presentation Title H-14: Effect of Mn and Zn Inhibitors on the Corrosion of Incoloy 800H in the MgCl2-KCl Molten Salt
Author(s) Yuxiang Peng, Ramana Reddy
On-Site Speaker (Planned) Yuxiang Peng
Abstract Scope The corrosion evaluations of Incoloy 800H (800H) alloys with Mn and Zn inhibitors separately were performed in MgCl2-KCl for 100 hours at 800oC under argon atmosphere. The corrosion rates were estimated based on the weight loss of the 800H samples, which were 0.003±0.038mg/cm^2/day with Mn and 0.152±0.022 mg/cm2/day with Zn. The negative value of the corrosion rate indicates the increase in weight of the 800H sample after corrosion. The increased weight was attributed to the deposition of inhibitor on the surface of 800H. Besides, the composition of deposition was investigated by using the scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). In comparison, both inhibitors Mn and Zn can protect 800H alloy from further corrosion, especially the Mn.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Advanced Characterization of Corrosion Behavior of Metals in Molten Chloride Salts
Application of Molten Salts in Nuclear Energy
Application of Voltammetry for Investigation of Materials Corrosion in LiF-NaF-KF (FLiNaK)
Cathodic Behavior of Moisture in LiCl-KCl Eutectic Melt: Applications to Pyroprocessing
Controlling Alloy Corrosion in Molten Chloride Salts: What Matters and What Doesn’t?
Determining Redox Potentials of Liquid Metal Electrodes for Recovery of Fission Products from Molten Salts
Development of Experimental Vehicle Technology for the Versatile Test Reactor to Investigate the Effects of Fast Neutron Irradiation on Molten Salts
Effect of Europium Fission Product on Chromium Solubility in Molten KCl-MgCl2 Salt
Effect of Salt Additives and Impurities on Flowing Commercial Chloride Salt Compatibility
Effects of Ionizing Radiation on Molten Chloride Salts
Electrochemical Corrosion of Zircaloy-2 in Molten LiCl
Europium Induced Alloy Corrosion and Cracking in Molten Chloride Salt
First Principles Investigation of Surface Behavior in Ni-Cr Alloy in Molten Salt Systems
First Steps Towards Predicting the Corrosion Rates of Structural Materials in Molten Salts
H-11 (Invited): The Chemistry of Graphite in FHRs and MSRs
H-12: Ab-initio Thermodynamics of Molten Salts
H-13: Characterization of LiCl-KCl Eutectic and LiCl-KCl+H2O Mixtures Using Electrochemical Impedance Spectroscopy
H-14: Effect of Mn and Zn Inhibitors on the Corrosion of Incoloy 800H in the MgCl2-KCl Molten Salt
H-15: Electrochemical Impedance Spectroscopic Study of Oxide Scales on 316L Stainless Steel in Molten FLiNaK Salt
H-16: Hot Corrosion Behavior of Ni Based Inconel 939 Superalloy in Molten Salt
H-17: LIBS Investigation of Molten Salt Corrosion
H-18: Maximization of Reduction Cell Efficiency for Spent Uranium Oxide Fuel
H-19: Molten Salt Electrolysis of Alkaline-earth Elements Using Liquid Metal and Alloy Electrodes
H-20: Multimodal Characterization of the Morphological and Chemical Evolution of Ni and Ni-20Cr Microwires in Purified Molten KCl:MgCl2
High-throughput Electrochemical Methods Development to Accelerate Molten Salt Corrosion Resistant Alloy Design
Improving the Corrosion Resistance of Ferritic-martensitic Steels in Molten Nitrate Salt via Diffusion Coatings for Concentrated Solar Power Applications
In-situ Spectro-electrochemistry of Molten Chloride Salts
Investigation of the Mechanism Behind Proton Irradiation Decelerated Corrosion in Molten Fluorides
Kinetic Properties of Fe2+/Fe, Ni2+/Ni, Cr2+/Cr and Cr3+/Cr Reactions in Molten MgCl2-KCl-NaCl Salt
Materials and Chemistry Research for Fluoride Cooled High Temperature Reactors
Mechanistic Understanding of Molten Salt Corrosion Using Electron Paramagnetic Resonance
Molten Chloride Salt Corrosion in Ni based Vs Fe based Alloys
Molten Salt Property Determination and Corrosion Characterization Using Transient Grating Spectroscopy
Multifunctional Voltammetry Sensors for Long-duration Process Monitoring and Control of Molten Salt Equipment
Non-galvanic Mass Transport in Molten Fluoride Salt Isothermal Corrosion Cells
Performance of Corrosion Resistant Claddings on 316H Stainless Steel in Molten Fluoride Salt
Redox Potential Measurement of Ni2+/Ni in MgCl2-KCl-NaCl Molten Salt using Chronopotentiometry Method
Salt Processing for Corrosion Mitigation in Concentrated Solar Power Systems
The Department of Energy Molten Salt Reactor Development Overview
Thermochemical Modeling and Development of the MSTDB Database for Simulating Molten Salt Reactors
Thermophysical-properties Characterization of a Quaternary Novel Salt based on Na+/K+ and NO3-/Cl- System
Understanding the Effects of Operating Conditions on UO2 Electroreduction
X-ray Absorption Studies to Elucidate Structure and Speciation of Metals in Molten Salt Systems

Questions about ProgramMaster? Contact programming@programmaster.org