ProgramMaster Logo
Conference Tools for Materials Science & Technology 2013
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2013
Symposium Joining of Advanced and Specialty Materials (JASM XV)
Presentation Title Investigation of Friction Stir Welding for Industrial Repair of Commercially Pure Aluminum Components
Author(s) , Priti Wanjara, Bruno Monsarrat, Gail Comeau
On-Site Speaker (Planned)
Abstract Scope Development of advanced repair technologies has gained increased interest recently stemming from the economic benefits of extending the service life of components. Instead of replacing the component, the failed regions can be refurbished by removing the damaged areas and repairing these with material addition and a suitable welding technology. Variations in material chemistry and dimensional mismatch at the interface between the original component and the added material constitute significant challenges for qualifying the repair process.Friction stir welding (FSW) was deliberated in this work to be the most promising solution for repairing flat commercially pure aluminum components. However, transfer of the FSW process from a laboratory scale to an industrial manufacturing environment has challenges specific to the nature of the application, which have been studied in this work alongside process development and optimization.
Proceedings Inclusion? Undecided

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Advances in Liquid Phase Laser Ablation and Irradiation for Nanomaterials Synthesis and Processing
Analysis of the Fusion Boundary Region in Dissimilar Metal Welds at Low Dilution
Application of Cold Metal Transfer Process for Structural Weld Overlays and Dissimilar Metal Welds
Characterization of Microstructure and Mechanical Properties of Friction Stir Welded AZ31 by Thermal Aging
Competitive Evaluation of Welding Versus Hot Induction Bending of Titanium Alloys
Conductive High-temperature Resistant Carbon Nanotube-substrate Contacts by Active Vacuum Brazing
Controlling the Solidification Microstructure in Aluminum Alloys by High Cooling Rate Imposition
Correlation between Microstructures and Fracture Toughness of Simulated Multi-pass Heat Affected Zones in Fe-3Mn Alloys
Development of Resistance Spot Welding Applying Pulsed High Current for High Strength Steel Sheet
Effect of a Pulsed Current Pattern on Mechanical Properties of Dual-phase Steel in Resistance Spot Welding
Effect of Heat Treatment on Cyclic Fatigue Properties of Thin Films of Austenitic Stainless Steels
Effect of Mn on the Formation Process of Fe-Al Intermetallic Compounds at Steel/Liquid Phase Interface
Effect of Silver Fineparticles on the Resistance Spot Welding of Pure Copper
Fabrication of Linked Plasmonic Nanostructures and their Application in Optical Communication and Optical Sensing
Factors Affecting Tempering Kinetics during Welding of Dual Phase and Martensitic Steels
Failure Micromechanism in Invar Alloy Weldments by Electron Microscopy and Microanalysis
Femtosecond Laser Induced Surface Melting and Nanojoining for Nanodevices
Femtosecond Laser Peening of A2024-T351 Aluminum Alloy in Air without Coating and Plasma Confinement Medium
Femtosecond Laser Peening without Sacrificial Overlay under Ambient Condition
Ferrite Alloy-based Surface Composites Produced by Friction Stir Processing
Freeform Fabrications of Titanium Alloy Components with Ordered Porous Structures by Laser Scanning Stereolithography and Powder Sintering
Friction Stir Welding of Inconel 718 for Aerospace Applications
FSW Joining of Accumulative Roll Bonded, Multi Nano Scale Layer Thickness Cu-Nb Panels
Hardfacing with Tungsten Carbide Nickel Composite Overlays – Current State of the Art
Heat Transfer Analysis of Post-Weld Heat Treatment of Grade 91 Steel
Improving the Mechanical Properties of Sn-58Bi Alloy with Multi-walled Carbon Nanotubes
Interfacial Microstructure and Its Formation Process of a Friction Stir Welded A3003/SUS 304 Lap Joint
Investigation of Friction Stir Welding for Industrial Repair of Commercially Pure Aluminum Components
Linear Friction Welding of AISI 316L Stainless Chains
Low Temperature Joining of Titanium at T=400C
Metallurgical Characteristics and Field Performances of Weld Overlay Claddings for Corrosion and Erosion-corrosion Protection in Industrial Applications
Metallurgical Characterization and Computational Modeling of Carbon Behavior in F22-625 Dissimilar Metal Welds
Microstructural Evolution of 3207 Hyper-Duplex Stainless Steel
Microstructure and Shear Strength of TiC/Ni-Inconel 600-joints Brazed with the BNi3 Filler Alloy
Morphology Characterization of Multi-walled Carbon Nanotubes in Sn-58Bi-CNTs Composite
Numerical Simulation of the Transport of the Oxide Layer during the Friction Stir Welding Process
One and Two Dimensional Silver Nanoparticles Synthesis: Simultaneous Self-assembly and Room Temperature Nanojoining
Optimization of Weldability of Ni-Based Alloys: Experimental and Computational Approach
Optimizing Dissimilar Material Joining Processes with Finite Element Modeling
Prediction of σ Phase Embrittlement in 316FR Stainless Steel Welds and its Influence on Repair-weldability
Smarter Shape Memory Alloys: From Welding Research to Technology Innovation
Static and Fatigue Strength of Dissimilar Al/Steel Spot Welds by Friction Bit Joining
Study and Evaluation of Miniature Mechanical Testing
Tensile and Creep-rupture Properties of the Diffusion-bonded Alloy 617 and Incoloy 800HT
Tensile Properties of Fine Grain MA956 Oxide Dispersion Strengthened Steel Following Friction Stir Welding with Varying Process Parameters
Weld Bead Center Line Shift during Laser Welding of Austenitic Stainless Steels with Different Sulfur Content
Weld Overlay Claddings by Gas-metal-arc Welding Process for Extending Plant Lives in Power Generation, Refinery & Petrochemical, and Pulp and Papers Industries
Weldability of Grade T23 and T24 Creep Resistant Steels
Weldability Studies of HAYNES®282® Alloy
Welding of Al and Fe Nanoparticles with Femtosecond Laser Radiation
Welding of Diboride-based Ultra-high Temperature Ceramics

Questions about ProgramMaster? Contact programming@programmaster.org