ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Pan American Materials Congress: Materials for Infrastructure
Presentation Title Development of Co-B-SiC Coatings for Use on Aeronautical and Automobile Industries
Author(s) Alma Martínez, Gabriel Trejo
On-Site Speaker (Planned) Alma Martínez
Abstract Scope The low corrosion and wear resistance, and low microhardness on structures, engines and pieces is a large and expensive problem for the aeronautical and automobile industries. There are some coatings that could offer these properties are Cr and Ni coatings. These coatings has good resistance corrosion and hardness. But recently due the European laws about the uses of Cr(VI) coatings is necessary find the new materials to replace the uses of Cr(VI). Cobalt-boron (Co-B) alloys could offer these properties because has excellent hard, wear resistant, relatively high fracture toughness, excellent chemical resistance and thermal stability. Co-B alloys for uses on coatings has been study recently because Co-B coatings has a thermal stability an good corrosion resistance, and the uses of SiC offer the hardness necessary to use in structures and parts of aircraft and automobile.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Anticorrosion and Adsorption Mechanism of Rhizophora Mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete
Cassia Fistula Leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl
Colombian Natural Fibers for Structural Materials
Development of Co-B-SiC Coatings for Use on Aeronautical and Automobile Industries
Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment
Fiber Reinforced Concrete Manufactured with Electric Arc Furnace Slag
Jigs, Hydro-cyclones and Sensor-based Sorting to Value Recycled Aggregates
PAN-25: Calcium Aluminate Cements Under High Temperature Oxidation Environment
PAN-26: Carbonation Study in Calcium Aluminate Cement Pastes
Performance of Hydraulic Mixes Manufactured with Electric Arc Furnace Slag Aggregates
Physical and Mechanical Properties of Bricks with Added Industrial Waste
Porous Asphalt Mixtures With 100% Siderurgic Aggregates
Portland Cement Paste Blended With Pulverized Coconut Fibers

Questions about ProgramMaster? Contact programming@programmaster.org