ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Cast Shop Technology
Presentation Title Influence of Cryolite Content on the Thermal Properties and Coalescence Efficiency of NaCl-KCl Salt Flux
Author(s) Veronica Milani, Alicia Vallejo Olivares, Gabriella Tranell, Giulio Timelli
On-Site Speaker (Planned) Alicia Vallejo Olivares
Abstract Scope Salt fluxes with fluoride additions are necessary to treat contaminated or oxidized aluminum scrap. This study aims to investigate the effect of cryolite additions on the thermal properties and the coalescence efficiency of a NaCl-KCl salt flux mixture. Thermodynamic calculations were carried out to examine the phase diagram of the salt mixture as the cryolite content increases. The study of the melting properties of the salt was carried out by means of differential scanning calorimetry. The coalescence efficiency of the salts was assessed by re-melting coated aluminum shredding. The results show a decrease of the melting point as the cryolite content increased, in good agreement with the thermodynamical calculations. For cryolite contents up to 3% wt., higher cryolite content in the salt leads to higher coalescence of the remelted shredding. However, the effects of increasing the cryolite content further than 3% wt. are minor.
Proceedings Inclusion? Planned: Light Metals
Keywords Other, Aluminum, Recycling and Secondary Recovery

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Cellular Automaton Model for Qualifying Current Grain Refiners and Prescribing Next-generation Grain Refiners for Aluminium Alloys
A Novel Green Melt Technology for Aluminum Alloys
Assessment of Separation and Agglomeration Tendency of Non-metallic Inclusions in an Electromagnetically Stirred Aluminum Melt
Automated Image Analysis of Metallurgical Grade Samples Reinforced with Machine Learning
Automated Metal Cleanliness Analyzer (AMCA): Digital Image Analysis Phase Differentiation and Benchmarking Against PoDFA-derived Cleanliness Data
CFD Modeling of Thin Sheet Product Using The Horizontal Single Belt Casting Method
Characterization of 8006 Aluminium Alloy Casted by TRC Technology with Steel-steel and Copper-copper Roll Pairs
Characterization of Low- and High Mg-containing Aluminum White Dross Using Deterministic Image Analysis of EPMA Scans
Counter Gravity Casting of Al Alloys: Microstructure and Properties
Defect Minimisation in Vacuum Assisted Plaster Mould Investment Casting through Simulation of High Value Aluminium Alloy Components
Designing a Safe Casthouse
Electromagnetic Priming of Filtration Systems: Pyrotek EM-DF
Hydrogen Absorption of Aluminum-magnesium Melts from Humid Atmospheres
Influence of Cryolite Content on the Thermal Properties and Coalescence Efficiency of NaCl-KCl Salt Flux
MagPump
Microalloying of Liquid Al-Mg Alloy Studied In-situ by Laser-induced Breakdown Spectroscopy
Modelling Contactless Ultrasound Treatment in a DC Casting Launder
Novel Methods for Roll Texturing: EDT and Sandblast Applications for Aluminum Twin Roll Cast and Cold Rolling
Numerical Analysis of Channel-type Segregations in DC Casting Aluminum Slab
Numerical and Experimental Investigation of Twin-roll Casting of Aluminum-lithium Strips
Operations Assisting and Predictive Maintenance Tools in Casthouses – Examples from AMAG Casting
Oxidation Study of Al-Mg Alloys in Furnace Atmospheres Using Hydrogen and Methane as Fuel
Recent Studies Using HR-TEM on the Fundamental Mechanism of Nucleation of α Aluminium on TiB2 in High Efficiency Grain Refiners
Recycling of Aluminium from Aluminium Food Tubes
Segregation Mechanisms and Their Effects on the Aluminium Flat Rolled Products (Sheet/Foil) Produced by Twin Roll Casting Tech
Stability of SiC and Al2O3 Reinforcement Particles in Thermomechanical Processed Direct Chill Cast 6xxx Al MMnCs
Tailoring the As-cast Microstructure of Twin-roll Cast AA3105 Alloy Produced by St/Cu Shell Pair
Towards the Efficient Recycling of Used Beverage Cans: Numerical Study and Experimental Validation
TRC Combi Box - A Compact Inline Melt Treatment Unit for Continuous Casting

Questions about ProgramMaster? Contact programming@programmaster.org