ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Scandium Extraction and Use in Aluminum Alloys
Presentation Title Effect of Sc, Zr and Other REE on the 1XXX Conductive Aluminium Alloys Properties
Author(s) Alexander Gradoboev, Dmitry Ryabov , Ruslan Aliev, Viktor Mann, Aleksandr Krokhin, Roman Vakhromov, Dror Shaked
On-Site Speaker (Planned) Dror Shaked
Abstract Scope The modern trend of transport is electric vehicles. This is due to the high environmental friendliness of electric vehicles and international regulations that regulate carbon footprint. Aluminum alloys known as good alternative to Copper for use in bus bars and wires. In order to replace Copper for the manufacture of bus bars for electric vehicles, aluminium alloys should have high electrical conductivity at the level of technical grades (1350) and at the same time have increased strength and thermal stability. The most promising method of improving strength properties is doping with small additives Sc, Zr and REM, which form fine dispersed precipitates, providing an increase in strength properties, significantly increasing recrystallization temperature and thermal stability. In the present paper, a study of the effect of additives of a small amount of Sc, Zr, and other REM on mechanical properties and electrical conductivity alloys of aluminum of 1XXX series carried out.
Proceedings Inclusion? Planned: Light Metals
Keywords Aluminum, Phase Transformations, Characterization

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Comparative Study of Al-Mg-Ti(-Sc-Zr) Alloys Fabricated by Cold Metal Transfer and Electron Beam Additive Manufacturing
Developing Al-Zr-Sc Alloys as High-temperature-resistant Conductors for Electric Overhead Powerline Applications
Dissolution and Development of Al3(Sc,Zr) Dispersoids in 5025 Structures Produced via Wire Arc Additive Manufacturing
E-30: Scandium Extraction from TiO2 Pigment Production Residues by Ion Exchange: Evaluation of Two Commercial Ion Exchange Resins
E-31: Effect of Sc on Surface Recrystallization of AA7050 Extrusions
Effect of Cooling Rate on W-phase Formation in Al-Cu-Sc Alloys
Effect of Sc and Zr Additions on Dispersoid Microstructure and Mechanical Properties of Hot-rolled AA5083 Alloys
Effect of Sc, Zr and Other REE on the 1XXX Conductive Aluminium Alloys Properties
Effect of Zr and Sc on Intermetallic Morphology and Hardening of an Al-Fe Alloy
Efficiency of Sc for Strengthening and Formability Improvement of 5XXX BiW Sheets
European Scandium for a Lighter and Greener Future
FEA Materials - AlSc Master Alloy Production Technology
Formation of Al3Sc Dispersoids and Associated Strengthening Mechanisms
Investigations into Optimized Industrial Pilot Scale BR Leaching for Sc Extraction
New Scandium Containing Aluminium Welding Wires for Wire + Arc Additive Manufacturing
Scandium Master Alloy Production via Sulfidation and Vacuum Aluminothermic Reduction
Solute Clustering during Natural Ageing in Al-Cu-(Sc)-(Zr) Alloys
Solvent Extraction of Scandium from Titanium Process Solutions
State of the Art Technologies for Scandium Recovery, Purification, and Aluminum-Scandium Alloy Production
Sustainable Scandium Recovery Method from Metallic 3D Printing Powders
Sustainable Selective Separation of Scandium from Acidic Industrial Wastes
The Development of New Aluminum Alloys for the Laser Powder-bed Fusion Process
Use of Sc to Improve the Properties of AA5083 Cast and Rolled Products

Questions about ProgramMaster? Contact programming@programmaster.org