 001 A Novel Protocol for Synthesis of Pd/TiO2/SiO2 Nanocomposite Following Sol-Gel Process |
| 002 A Quantitative Method to Assess Free Iron Removal after Passivation |
| 003 Biocompatibility of TiO2 nanotubes on titanium via anodic oxidation and heat treatment |
| 004 Calcination Study of Synthesized Nano Hydroxyapatite Using Cationic and Non Ionic Surfactants |
| 005 Calcium Phosphates for Drug Carrier: Adsorption and Release Kinetics of Drugs and Growth Factors |
| 006 Corrosion Susceptibility of Magnesium Based Biodegradable Alloys in Simulated Physiological Solutions |
| 007 Direct Cytotoxicity Evaluation of 63s Bioactive Glass Nanoparticles Using Yeast Model and Human Chondrocyte Cells by Microcalorimetry |
| 008 Effect of Crystallinity on Dissolution Properties of Plasma Sprayed Hydroxyapatite Coatings |
| 009 Effect of Different Type of Kenaf Fiber Composite on the Mechanical Properties |
| 010 Effect of the Sintering Temperature on Microstructural Properties of a Bioceramic Bone Scaffold |
| 011 Effects of Bioabsorbable Mg Alloys on Endothelialization |
| 012 Electrochemical Synthesis of Polyaniline over Prussian Blue Encapsulated Ormosil Electrodes and Its Application in the Electrochemical Oxidation of Cysteine |
| 013 Gelatin Stabilized Gold Nanoparticles Supported Titania Nanotubes: A Novel Platform for Medical Implants |
| 014 Heat Treatment Effect on Different Type of Kenaf Fiber Composite |
| 015 Highly Sensitive Determination of Ascorbic Acid over Polyaniline Synthesized Electrochemically within Nanostructured Network of Sol-Gel Matrix |
| 016 Impact Strength and Post Impact Tensile Strength of Kenaf Powder/PP (with and without MAPP) with Different Powder Percentage and Sizes |
| 017 In Vivo Evaluation of the Spark Plasma Sintered Al2O3-ZrO2-CeO2 Composites |
| 018 Nanofiber-Based Sensors for Oxygen Determination |
| 019 Post Impact Tensile on Kenaf Powder Fiberglass Laminate |
| 020 Post-Impact Fatigue of Short Kenaf Fibre Metal Laminates |
| 021 Radiation Interactions in Biologically Important Materials |
| 022 Sintering and Bioactivities of Hydroxyapatite |
| 023 SiO2 and SrO Doped β-TCP: Influence of Dopants on Mechanical and Biological Properties |
| 024 Sr/Mg Doped 3D Interconnected Porous β-Tricalcium Phosphate Ceramic Scaffolds for Bone Tissue Engineering: In Vivo Evaluation in Rat and Rabbit Model |
| 025 Structural Analysis and Characterization of Zn-Substituted Nano Hydroxyapatite |
| 026 Synthesis and UV-Enhanced Cytotoxicity of Pure and Ni-Doped ZnS@ZnSe Quantum Dots |
| 027 Synthesis of Prussian Blue/Palladium Nanocomposite and Its Application in the Electrocatalytic Determination of Hydrogen Peroxide |
| 028 The Deposition of Chitosan-Vancomycin-Gelatin-Calcium Phosphate Composite on Post Bio-Ceramics Coated Ti6Al4V |
| 029 Thin Film Storage Material W-DLC and Si-DLC on AISI-316 for Biomedical Applications |
| 030 Tricalcium Phosphate System in Drug Delivery and Bone Graft |
| 031 Alumina-Based Composites Reinforced with Titanium Nanoparticles |
| 032 Analysis of Load-Displacement Curve by Hertzian Indentation for Thermal Barrier Coating Durability |
| 033 Characterization of Ceramic Powders during Compaction Using Electrical Measurements |
| 034 Colloidal Processing of Diamond Particles for Diamond Film Fabrication on Graphene and Silicon Substrates |
| 035 Copper (I) and (II) Containing Waveguiding Layers in Novel Silicate Glass |
| 036 Correlation between Structure and Electronic Properties in Y1-xPrx Ba1.9Sr0.1 Cu3O7-δ High Tc Superconductors |
| 037 Critical analysis of experimental methods for reliable oxidation rate measurements of ultra-high temperature ceramics using thermal gravimetric analysis up to 1600°C |
| 038 Design and Development of Dichroic Glasses |
| 039 Effect of % Boron on the Tribological Performance of Alumina Matrix Multifunctional Composites for Energy Efficient Sliding Systems |
| 040 Effect of Neutrons on the Microstructure Properties of Hg1-x-yTlxPbyBa2Ca2Cu3O8+δ for (0≤x≤0.4) and (0≤y≤0.4) System |
| 042 Effect of Temperature on the Hydration of Activated Granulated Blast Furnace Slag |
| 043 Fabrication and Corrosion Behavior of Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes |
| 044 Fabrication of ZrO2-SiC Composites from Natural Zircon Ore by Carbothermal Reduction |
| 046 Gelcasting Process of Fused Silica-Boron Nitride Composite Ceramics |
| 047 Glass-Ceramic Composites for High Energy Density Capacitors
|
| 048 Improving PZT Thin Film Texture through Pt Metallization and Seed Layers |
| 049 Investigation of Effective Parameters in Production of A356/ TiB2p Composite using of TiB2p/CMC/PPS Mortar |
| 050 Investigation of ZnO:N and ZnO:(Al,N) Films for Solar Driven Hydrogen Production |
| 051 Manufacture and Mechanical Characterization of Polymer-Composites Reinforced with Natural Fibers |
| 052 Microstructure and Properties of Al2O3 Ceramic Composite Toughened by Different Grain Sizes of LiTaO3 |
| 053 Polymer-Derived Mesoporous SiOC/ZnO Nanocomposite for Water Decontamination |
| 054 Processing and Mechanical Properties of Bulk and Multilayer ZrB2 Using Tape Casting and Spark Plasma Sintering |
| 055 Processing of Alumina-Rich Spinel Nanopowders Made by Liquid Feed Flame Spray Pyrolysis (LF-FSP) to Fine-Grained Ceramic Composites |
| 056 Processing–Electronic Property Relations for Y1-xPrx Ba2 Cu3O7-δ High TC Superconductors |
| 057 Properties and Fabrication of Carbon Nanotube Dispersed Al2O3 Composites by Spark Plasma Sintering
|
| 058 Properties Optimization of Refractory Mineral Resources in China |
| 059 Raman Scattering as a Tool to Characterize the Changes of the Silicate Glass Structure after Ion Implantation |
| 060 Structural Investigations on Yttria /Scandia Doped Ceria - Low Yttria Doped α - Alumina Composites, a New Electrolyte for IT-SOFC |
| 061 Study on Reaction between Refractories and Flux with Slagging-under-Load Test |
| 062 Substitution Grade Effect on the Synthesis and Magnetic Properties of Cu(Co,Zn)Fe2O4 Powders |
| 063 Synthesis and Characterization of New Lead-Free Low Melt Sealing Glasses |
| 064 Synthesis and Study of the Chemical Interaction of Strontium Sulfualuminate Sr4Al6O12SO4 with Molten Aluminum Alloys |
| 065 Synthesis of Ni and NiCo-Y2O3 Nano Powders
by Using a Solution Combustion Synthesis in an Air Atmosphere |
| 066 Synthesis, Shaped and Mechanical Properties of Hydroxyapatite–Anatase Biomaterials |
| 067 Thermal Behavior and Kinetics of Glass Transition in B2O3 Containing Tungsten-Tellurite Glasses |
| 068 Thermoplastic Extrusion of YAG Tubes |
| 069 Zinc Oxide (ZnO) and Bandgap Engineering for Photoelectrochemical Splitting of Water to Produce Hydrogen |
| 070 A Phenomenological Thermodynamic Potential of CaTiO3 Single Crystals |
| 071 An LTCC Clark-Type Oxygen Sensor |
| 072 Dependence of Dielectric Properties on Ceramic Fillers of Polytetrafluoroethylene-Matrix Composites |
| 073 Dielectric Properties in PMN-PT/CFO Particulate Magnetoelectric Composites |
| 074 Dielectric Properties of Chemically Bonded Phosphate Ceramics Fabricated with Wollastonite Powders |
| 075 Electronic Transport Studies of Bulk HgCdTe Based on an Ensemble Monte Carlo Calculation Including Three-Valley Band Structure Model |
| 076 Ferroic and Structural Investigations in Rare Earth Modified TbMnO3 Ceramics |
| 077 Ferroic Properties Of Batio3 Nanoparticles |
| 078 HRTEM Investigations in BiFeO3-PbTiO3 Multifunctional Ceramics |
| 079 Lab Scale Non-Destructive Compositional Analysis of PZT RF Sputtered Thin Films |
| 080 Low Temperature Specific Heat of BiOX (X=Cl, Br and I) Single Crystals |
| 081 New Methodology of Improving the Etching Factor by Correlating between Microstructure and Residual Stress of Copper Pattern in Electronic Packages |
| 082 Phase-Field Simulation of Electric-Field-Induced Magnetic Domain Switching in Magnetic/Ferroelectric Heterostructures |
| 083 Phase-Field Simulations of Ferroelectrics Domain Structures of PbZrxTi1-xO3 Bilayers |
| 084 Piezoelectric Properties of Ta Substituted-(K0.5Na0.5)NbO3 Films |
| 085 S-Graded Buffer Layers for Semiconductor Devices |
| 086 Some Electrical Properties of Soluble Conducting Polymer Polyhexylthiophene (PHT) Prepared by Electrochemical Polymerization |
| 087 Synthesis and Ferroic Properties Studies in FeAlO3-Based Multifunctional Ceramics |
| 088 The Chemisorption of Cobalt Atom on Noble Metal Surface |
| 089 The Electrical Properties of Polyaniline Blend with PolyMethalMethacrylate as Conducting Polymers Alloys (PAni/PMMA) |
| 090 The Influence of Consolidation Parameters on Statistics Calculations Grain Contact Surfaces BaTiO3-Ceramics |
| 091 Ag-LSM Composite Electrodes for Solid Oxide Fuel Cells |
| 092 Decarburization of Alloy 617 during Aging at Various High Temperatures |
| 093 Fabrication of LiMnxFe1-xPO4 Glass and Glass-Ceramics for Lithium Ion Battery |
| 094 Isotopic Enrichment Studies to Determine Elemental Diffusion Profiles Through an Established Alteration Layer |
| 095 LiAlO2 Solubility Measurement in (Li-K) Carbonate Melt |
| 096 Structure Characterization and Electrochemical Performance of LiFePO4/Carbon Hybrid for Li-Battery Cathode Materials |
| 097 Ultra-Low Mass Planar SOFC Design |
| 098 3D Simulation of Sliding on Diamond-Coated Carbide Substrates |
| 099 A Triple Junction Distribution Function |
| 100 Adsorption of Pentacene on Silica Surfaces: An Ab Initio Study |
| 101 Atomistic Modeling of Dislocation-Interface Interactions |
| 102 Characterisation and Modeling CuCrZr Electrode Degradation during Resistance Spot Welding |
| 103 Effect of Alumina in Phase Formation at the Interface between Titanium and Calcia-Zirconia Composites at 1600℃ |
| 104 Effect of CaZrO 3 Content on the Interfacial Phenomenon between Titanium and Zirconia at 1400℃ |
| 105 Effect of Fluorine Incorporation on the Structures and Magnetic Properties of Perovskite and Ruddlesden Popper Ferrates |
| 106 First-Principles Study of Reactive Elements Segregation at Grain Boundaries in Chromia |
| 107 Floating-Zone Growth and Characterization of Single Crystals of Transition Metal-Containing Orthosilicates
|
| 108 Geometrical and Topological Evolution in 3D Grain Coarsening of High Purity Nickel Using High Energy X-ray Diffraction Microscopy |
| 109 Grain Boundaries in Dense Nanocrystalline Zirconia and Ceria Ceramics: Exclusive Pathways for Proton Conduction at Room Temperature |
| 110 Grain Boundary Character Distributions in Severe Plastic Deformed Pure Cu |
| 111 Grain Boundary Electrical Properties of Ge-Doped Nd4 Ga2 O9 |
| 112 Grain Growth in Copper, Copper-Titanium, and Titanium Doped Alumina |
| 113 Image Analysis Investigating Porous Structures of Carbon Cathodes Materials and Penetration of Cryolitic Melts |
| 114 Improvement of Grain Refining in Severe Plastic Deformed Ni-Cr Alloy |
| 115 Interface Microstructure and Mechanical Properties of Steel/Mg Alloy Multilayered Metal Composites by Infiltration |
| 116 Interfacial Phase Effect on Static-Dynamic Mechanical Properties of W-Ni-Fe Heavy Alloy |
| 117 Investigation of the Effect of Molybdenum on Microstructure and Mechanical Properties of High Mn Steel Fe-33Mn-3Si-2Al |
| 118 Ligational Aspects of the Mesogenic Schiff-Base, N,N’-di-(4’-Octadecyloxybenzoate) Salicylidene Diaminoethane, with Some Rare Earth Metal Ions |
| 119 Measuring Heterophase Interface Character Distribution (HICD) in Accumulative Roll-Bonded (ARB) Cu-Nb Multilayered Composites |
| 120 Microsecond-Pulsed High Resolution Glow-Discharge Mass Spectrometer for Multielemental Nanometer Scale Depth Resolved Measurements of Thin Layered Structures |
| 120 Numerical Simulation of Solidification Structure of 28MnCr5 Gear Steel during the Continuous Casting Process |
| 122 Oxygen Transport and Oxidation States of B-Site Cations in Ba(Co, Fe, Nb)O3-δ |
| 124 Predicting Grain Boundary Structures and Properties from AB Initio Molecular Dynamics and First-Principles Calculations |
| 125 Quantifying the Effect of Spatial Resolution on the Accuracy of 3-D Feature Characterization |
| 126 Residual Compressive Stress Concentrations in Pb-Free Solders |
| 127 Structural Aspects and Li Ion Conductivity of Cation Excess Garnets |
| 129 Study of Mechanical Deformation of Zr55Cu30Al10Ni5 Bulk Metallic Glass through Instrumented Indentation |
| 130 Synthesis and Characterization of Partially Stabilized Zirconia by Doping with CaO and MgO |
| 131 TEM Characterization of the Basal Screw Dislocation in a (0001) Low-Angle Twist Grain Boundary of Alpha-Al2O3 |
| 132 The Characterization of Polypropylene Nanoclay Composite |
| 133 The Effect of Heat Treatment on the Mechanical Properties of AZ80 Alloy |
| 134 Thermal Polarization and Characterizations of Polyimide/TiO2 Samples |
| 135 Transference Number Measurements of MIECs: SSC and LSGM |
| 136 Effect of Prestrain and Bake Hardening Heat Treatment on Fracture Toughness and Fatigue Crack Growth Resistance of Two Dual-Phase Steels |
| 137 Effects of Coiling Temperature on the Mechanical Properties and Microstructures of Low Alloy Martensitic Steels |
| 138 Insulated Sprayed Roll Technique "ISRT" and Solid Shell Resistance of Inner Quality of Continuously Cast Steel Slabs |
 139 Investigation on the Inclusions in the First Slab of Ultralow Carbon Steel |
| [Replication or Save Conflict] |
| 140 Kinetic Process of Nozzle Clogging during Continuous Casting of Lower Carbon Al-Killed Steel |
| 141 Numerical Simulation on Influence of Parameters of RH on Decarburization Process for IF Steel |
| 142 Optimization of Secondary Cooling Parameters in Continuous Casting Using CAFÉ Model |
| 143 Research of Iron Slag Appearance of Blast Furnace Hearth |
| 144 Retained Austenite Characteristics and Tensile Properties in TRIP Assisted Steel |
| 145 Study on the Combustion Process of Pulverized Coal and Carbonaceous Matter Dust in BF |
| 146 The Influence of Geometrical Factors of the Deformation Zone on Changing for Deformation Shift Degree for the Axial Zone of Rolled High Bars |
| 147 The Variations of Compressive Strength of Containing Carbon Pellets Preheated under Reducing Atmosphere |
| 148 Thermodynamics Analysis and Control of TiN Precipitation during Solidification of Q345EN Steel |
| 149 Three Dimensional Modeling of Raceway of Dissected Blast Furnace |
| 150 Analysis of Hf-Ta Alloys for Oxidation Protection in Ultra High Temperature Environments |
| 151 Characterization of the Oxidation Behavior of Nb-20Si-20Cr Alloy |
| 152 Comparative Analysis of NiAl Alloys Used as Resistant Coating at High Temperatures Deposited by Powder Flame Spraying and HVOF Process |
| 153 Comparative Study of the Deposition of NiCoCrAl Alloys Used as Bond Coat Deposited by HVOF and Air Plasma Spray Processes |
| 154 Comparison of Oxidation Behavior of Nb-20Si-20Cr-5Hf and Nb-20Si-20Cr-5Al Alloys |
| 155 Environmental Degradation of Coated Metals |
| 156 Environmentally Friendly Tin Oxide Coating through Aqueous Solution Process |
| 157 Examination of the Machining Affected Zone in Gamma Titanium Aluminide Machining |
| 158 How Coagulant Changes with Corrosion Inhibitors Help Reduce Costly Water Main Breaks |
| 159 Oxide Scale Development in Select Alloys from the Nb-Mo-Cr-Si-B System |
| 160 Protective Coatings for Molybdenum Alloys |
| 161 Synthesis and Performance of PGM Modified βNiAl Coatings |
| 162 The Characteristics of High Strength and Lead-Free Machinable α-β Duplex Phase Brass Cu-40Zn-Cr-Fe-Sn-Bi Alloy |
| 163 The Mechanism of Metallic Iron Aggregation and Effect of Addition Agent on the Aggregation of Metallic Iron during the Self-Reduction of High Basicity Coal Mixed Briquettes |
| 164 Characteristics of Al0.3CoCrFeNiCx High Entropy Alloys |
| 165 Characteristics of High Modulus Composite Material for Aerospace Design |
| 166 Corrosion Resistance of Pure Ti Processed by High-Ratio Differential Speed Rolling
|
| 168 Dynamic Deformation and Fragmentation Response of Maraging Steel Linear Cellular Alloy |
| 169 Dynamic Recrystallization Behavior of g/g’-d Eutectic Ni-Base Superalloy during Hot Forging |
| 170 Effects of Addition of SiC and TiB2 Particles on Structural and Mechanical Properties of PM Al-Si Foams |
| 171 Elaboration and Characterization of Particulate Reinforced Titanium Metal Matrix Composite Using TiH2 as the Matrix Powder |
| 172 Evaluation of the Corrosion Behavior of Laser Welded and GTAW Welded Austenitic Stainless Steel 316L in Lithium Bromide and Comparing the Inhibition Effect of Chromate, Bromate and Molybdate on the Corrosion Behavior of Austenitic Stainless Steel 316L in Lithium Bromide |
| 173 Failure Analysis and Improvement of Low Temperature Impact Energy of Q345D Heavy Plates |
| 174 Failure Analysis of Cobalt–Based Seal Pins from Gas Turbines |
| 175 Fatigue Failures in Threaded Steel Fasteners |
| 176 High-Temperature Oxidation of Ti-48Al-2Cr-2Nb-(0~1%)W Alloys in Air |
| 177 Influence of Plasma Species on the Surface Properties of Titanium Treated Thermochemically by Plasma N2-Ar-O2 |
| 178 Influence of Present Species into N2 – Ar – CH4 Plasma Mixture on Pieces Made of Ti |
| 179 Structural Characterization of Open-Cell Aluminum Foams by a Sintering-Dissolution Process |
| 181Tailored Chemistry of Composites Sintered by Field Assisted Sintering Technology (FAST) for Heat Sink Applications |
| 182 The Effect of Strain Rate and Rolling Direction on Tensile Properties of AZ 31 Magnesium Alloy
|
| 183 The Fabrication and Characterization of Carbon Nanotube Sponge with Controllable Pore Size |
| 185 Wear Behavior of Al-Si / SiCp Metal Matrix Composites |
| 186 Wireline Failures in Oil & Gas Wells - Case Studies |
| 187 A Comparative Study of Electroless Deposition Route Involving Zn and Cu+ or Cu2+ |
| 188 A Simple Method for the Synthesis of Pt-Ag-Au Alloy Nanoparticles |
| 189 Adsorption Thermodynamics of PAA on Ceria Nanoparticles and Its Biocompatibility |
| 190 Analysis of the Key Factors Controlling Sintering of LSM/CGO Multilayer Laminates |
| 191 Carbon Nanotube-Assisted Formation of Aluminum Nanoparticles |
| 192 Catalyst-Assisted Low Temperature Synthesis of Zinc Oxide Nanostructures by Vapor Phase Transport |
| 193 Deformation Mechanism of Nanocrystalline Copper Films during Uniaxial Relaxation Test at Room Temperature |
| 194 Effect of Equal Channel Angular Pressing on the Thermal Stability, Microstructure and Mechanical Properties of ETP Copper |
| 195 Finite Element Modelling of Copper by Equal Channel Angular Extrusion |
| 196 Hydrothermal Synthesis of Ga4Tin-4O2n-2 |
| 197 Improving the Wettability of Aluminum on Carbon Nanotubes |
| 198 Influence of Growth Condition on Ga and N Co-Doped Zinc Oxide Films and Its Effect on PEC Response for Solar Driven Hydrogen Production |
| 199 Influence of Pressing Temperature on Microstructure Evolution and Mechanical Behavior of Ultrafine-Grained Cu Processed by Equal-Channel Angular Pressing |
| 200 Investigation of the Formation and Extraordinary Thermal Stability of Mg Nano-Grains in Ti2AlC-Mg Composites |
| 201 MgO Tunnel Barrier for Room Temperature Spin Injection and Detection in Semiconductors |
| 202 Microstructure Exploration of High Strength High Ductility Iron-Based Glassy NanoMaterials
|
| 203 Multiwalled Carbon Nanotubes Decorated with Va and Ni by Gamma Irradiation |
| 204 Plasma Sprayed Titanium Oxide-Carbon Nanotube Composite Coating for Dye Sensitized Solar Cells |
| 205 Reversible Ferromagnetic Switching in Undoped and Doped (Co and Mn) ZnO Thin Films |
| 207 Site-Specific Texture Analysis of High Pressure Torsion Processed BCC Metals Using Synchrotron Radiation |
| 208 Structure of Carbon Nanotubes Grown by Arc-Discharge Technique under Argon, N2 and O2 Atmosphere at Different Conditions |
| 209 Synthesis and Characterization of Cobalt Aluminate and Fe2O3 Nanocomposite Electrode for Solar Driven Water Splitting to Produce Hydrogen |
| 210 Synthesis and Polymorph Stability of TiO2-SnO2 Nanoparticles Prepared by Pechini Method |
| 211 Synthesis and Size Distribution Narrowing of Naked Noble Metals Nanoparticles Made in Imidazolium Ionic Liquid |
| 212 Tailoring the Relative Si3N4 and SiC Contents in Si3N4/SiC Nanopowders through Carbothermic Reduction and Nitridation of Silica Fume |
| 213 Thiol-Dependent Cytotoxicity of Zn-Based Quantum Dots |
| 214 Transport Mechanism of Olfactory Information Using Terpene Sensing Properties of Nanostructured MIP |
| 215 Uniform Elongation of Ultra-Fine Grained Steels Evaluated by Micro-Compression Tests |
| 216 Using Nanoindentation to Study Residual Stress State and Constitutive Properties in A/B Metallic Multilayer Thin Films |
| 217 ZnO:GaN Thin Films for Photoelectrochemical Water Splittting Application |
| 219 Alumina/Silicon Carbide Nanocomposites: Microwave Sintering |
| 220 Automatic Controlled Electro-Chemical Machining |
| 221 Crack Formation Behavior of Chemically Strengthened Soda Lime Glass |
| 222 Dissimilar Joining of Steels and Aluminum Alloy Pipes for Automobile Applications |
| 223 Effects of Rolling Direction on the Limiting Strains in Mg AZ31B Sheets |
| 224 Erosion and Corrosion Resistance of TiAlN/TiN
Nanomultilayer and TiAlN-Si3N4
Nanocomposite Coatings in Molten Aluminum
Alloy |
| 225 Evaluation of Mechanical Properties of 8090 Al-Li Alloy by Equal Channel Angular Pressing Process |
| 226 Formation of Aluminum Oxides on Carbon Nanotube Surface via Al2O3-Carbon Covalent Bonds |
| 227 Glass transition behavior (ΔTg and ΔCp) of carbohydrate mixtures |
| 228 Gradient Testing and Thermo-Mechanical Lifetime Modeling of Fly-Ash Infiltrated Thermal Barrier Coatings for Power-Generating Gas Turbines
|
| 229 Hot Extrudability of Semi Solid AM100A Alloy Fabricated by Cooling Plate |
| 230 Improving Pump Efficiency and Lowering Life Cycle Cost through Enhanced Ceramic Coatings
|
| 231 Influence of Nanostructural Coatings on Aluminum Soldering/Adhesion Resistance of H13 Hot Work Tool Steel |
| 232 In-Situ Processing of Alumina Layers by PTA |
| 233 Investigating the Post-Forming Properties of the AZ31B Magnesium Alloy Following Biaxial Stretching |
| 234 Investigation on Si3N4 Ceramic Foams |
| 235 Investigation on Si3N4 Ceramic Foams |
| 236 Mechanical Behavior of Pure Aluminum Fabricated by Equal Channel Angular Pressing |
| 237 Mechanical Properties and Oxidation Behavior of Spark Plasma Sintered ZrB2-ZrC-SiC Composites |
| 238 Mechanical Properties in Laser-FSW Hybrid Welded Inconel 718 Alloy |
| 239 Mechanical Properties of Amorphous Carbon Nitride Films According to Deposition Conditions and Post Process |
| 240 Microwave Sintering of PZT / Fe-Co Nanocomposite Obtained by In Situ Sol-Gel Synthesis |
| 241 Microwave-Assisted Synthesis of B4C by Direct H3BO3 Carboreduction |
| 242 Microwave-Assisted Synthesis of TiC by Carbothermal Reduction |
| 243 Multicomponent Saturing of Titan Alloys by SHS |
| 245 Oxidation Behaviors of Silica Coated Mo-Si-B Alloys |
| 246 Preparation of Metallic Glass/Metallic Glass Composites Powder by Mechanical Alloying |
| 247 Some Investigations into Ultrasonic Machining of Alumina-Zirconia Ceramic Composite |
| 249 The Effect of Postweld Heat Treatment on the Mechanical Properties Microstructures of X70 HSLA Steel |
| 250 The Researching of Deformational Parameters at Copper Alloys Rolling with Protective Coatings |
| 251 Thermal Gradient Cycling with Simultaneous Silicate Particle Deposition onto Advanced Air Plasma Sprayed Thermal Barrier Coatings |
| 253 Real-Time Observation of Soldering of Solder Balls Using SEM-WELDER
|