ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Recent Advances in Functional Materials for Printed, Flexible and Wearable Electronics
Presentation Title Integrated and Flexible Biosensors for Point-of-care Diagnostics
Author(s) Vinay Gupta
On-Site Speaker (Planned) Vinay Gupta
Abstract Scope Biosensors have lead to a revolution in diagnostics with the highly sensitive devices detecting biological analytes in ultra low concentrations. However, the goal is to further develop these technologies so that the systems become user friendly, miniaturized, portable and wearable. A flexible biosensor based on carbon nanofibers has been developed and utilized for electrochemical detection of cholesterol whilst demonstrating its flexibility (in collaboration with Korea Institute of Technology). An integrated electrochemical biosensor has been developed by miniaturizing the conventional three electrode system on a single chip. For reduced reagent volume and continuous real time measurements, polydimethylsiloxane microchannels of cross sectional area 300 μm x 40 μm have been fabricated and integrated with the bioelectrode. However, it becomes increasingly important to develop these devices in a low cost and disposable format. Thus, a filter paper based self-pumping microfluidic biosensor has been developed for cholesterol quantification.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3-D Printed Polymer-based Gas Sensors
3D Electronics and Sensor Circuits by Combining Conventional PCB Technology with Low Temperature Embedding and Forming
3D Printed Anodes for Al-air Batteries
3D Printing of Metals and Metal Oxides from Solution for Energy and Biomedical Applications
3D Printing of Soft Ionic Actuators/Sensors for Soft Robotic Applications
Additive Manufacturing with Aerosol Jet: From Prototyping to Production
Challenges in Gravure and Direct-write Printing of Nano-colloidal Inks
Delaminated Inkjet Printed Lines with Improved Electro-mechanical Behavior
High Performance Sensors and Antennas by 2D and 3D Printing of Nanoparticles
Highly Stretchable Metallic Interconnects on Polymer Substrates: Architecture and Mechanisms
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/C0529C03377A93C285258193005AA23F?OpenDocument">Integrated and Flexible Integrated and Flexible Biosensors for Point-of-care Diagnostics
[Replication or Save Conflict]
Materials Integration for Flexible Electronics: Cu-interconnects, Supercapacitors
Microheater Array Powder Sintering: A New Process for Printed Electronics
Nondestructive Examination Study in P(VDF-TrFE) Filter System and PM2.5 Spatial Resolution Technology by Using Synchrotron Transmission X-ray Microscopy
Printable Functional Materials for Smart Fabrics
Recent Advancement on Printed, Stretchable, and Wearable Electronics in 2D Materials
Room-temperature Aerosol Deposition of PLZT Films on Polymer Substrates
Single-crystalline-like Semiconductor Films on Flexible Substrates: A Route towards Roll-to-roll Manufacturing of High-performance Electronic Devices
Stretchable Wirings Prepared with PU and Silver Flakes
Structural-resolved Study Of Piezoelectric Properties Of P(VDF-TrFE) Films
Textile-enabled Wearable Energy Storage Devices (invited)
Transparent Field Effect Biosensors Printed on Highly Curved Surfaces
Ultrafast Pulsed Light Sintering of Thermoelectric Nanoparticles

Questions about ProgramMaster? Contact programming@programmaster.org