ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Materials Engineering -- From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang
Presentation Title COD Removal from Electroplating Degreasing Wastewater by UV/H2O2 Process
Author(s) Jianjun Liu, Zhichao Chen, Lili Xi, Jiann-Yang Hwang, Yong Shi
On-Site Speaker (Planned) Zhichao Chen
Abstract Scope Degreasing wastewater is a common type of wastewater produced from surface degreasing process in electroplating industry. It has the characteristics of high pH, high oil content and high COD value. This paper studied COD reduction of electroplating degreasing wastewater by UV/H2O2 oxidation process, and factors that affect COD removal rate. Those include H2O2 dosage, feeding method, and pH value. The optimized reaction condition for COD removal by UV/H2O2 process was suggested in the paper.
Proceedings Inclusion? Planned:

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A New Electroplating Wastewater Treatment Process Using Electric Lime and Vacuum Filtration
Ballistic Evaluation of the Multilayer Armor System Reinforced by Guaruman Fiber
Barcol Hardness of Green Composites for Cold Repair in Industrial Piping
Blending of Polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene with Polyethylene-graft-polystyrene for Cation Exchange Membrane Preparation with Enhanced Properties
Characterization of Mixing Conditions of Different Nozzle and Porous Plugs Setups in Non-ferrous Refining Furnaces
Characterization of Mortars Incorporated with Natural Açai Fiber
COD Removal from Electroplating Degreasing Wastewater by UV/H2O2 Process
Comparison between Compression Strength of Two Castor Oil Polyurethane Resin Matrix Composites Reinforced with Coconut or Piassava Fiber
Comparison of Mechanical Properties of Banana Fibers Reinforcement in Different Thermoset Matrix Composites
Determination of the Elasticity Modulus of a PC/rGO Nanocomposite via Impulse Excitation Technique - Sonelastic
Development and Management of Industrial Park for Chinese Electroplating Industry
Effect of Boron Iron Concentrate on the Strength of Preheated Iron Ore Pellets
Effect of Temperature on the Leachability of Chromium in EAF Slag
Effects of Ozone on COD Reduction in Electroplating Wastewater
Electroplating Wastewater Treatment in China
Evaluation of Ballistic Behavior by Residual Velocity of Epoxy Composite Reinforced with Sisal Fabric after UV Radiation Exposure
Extraction of Cerium from Catalyst of Waste Automobile Exhaust Gas Purifier
Improved Ballistic Armor with Composites Reinforced with Natural Fibers Functionalized with Graphene Oxide
Influence of Mercerization Process on the Surface of Coconut Fiber for Composite Reinforcement
Influence of Surface Treatment on Physical and Chemical Behavior of Politetrafluoroethylene
Influence of Weathering on the Mechanical Performance of an Aramid Fabric
Investigation of Nickel Laterite Smelting Slags
Materials Processing: From Ideas to Practice
Mercury Removal by Bio-chars with Plasma Surface Modification
Metallographic Feature of a Nickel-based Superalloy in Fluoride Electrolyte Melt
Novel Ballistic Composites: Performance Evaluation of Epoxy Composite Reinforced with Buriti Fabric as Component of a Multilayer Armor System
Novel Route of Polymerization for Engineering Thermorrigid Biopolymer Based on Soybean Oil
Oxidation of Cyanide and Simultaneous Copper Electrodeposition from Electroplating Wastewater in an Electrochemical Reactor
Phase Diagram and Thermodynamic Properties of Cu-O Binary System
Physical and Morphological Analysis of Concrete Produced with Expanded Clay
Production and High Ratio Application of Iron Ore Pellets in Shougang
Recent Progress in Microwave-assisted Pyrometallurgy at Central South University
Recycled Common Glass Bottle Used in Composite Repair for Industrial Piping
Renewable Energy for Sustainable Mining
Structural Characterization of Caranan Fiber (Mauritiella Aramata)
Tensile Properties of Epoxy Matrix Reinforced with Fique Fabric
Tensile Strength of Synthetic and Green Composites Used as Wrapping Cold Repair in Piping
The Effect of the Diameter on the Density of Ubim Fiber
The Formation Mechanism of the Third Phase in Nickel Electrolyte
The Influence of Ultraviolet (UV) Radiation on the Surface of Coconut Fiber
Thermal Behavior of Epoxy Matrix Composite Reinforced with Caranan Fibers
Treatment of Electroless Nickel Plating Wastewater by Ozone Oxidation
Weibull Analysis of the Mechanical Properties of the Epoxy Composite Reinforced with Guaruman Fibers

Questions about ProgramMaster? Contact programming@programmaster.org