ProgramMaster Logo
Conference Tools for Materials Science & Technology 2012
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Propose A Proceedings
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2012
Symposium MS&T'12 Poster Session
Presentation Title H3: Influence of Plasma Species on the Cristalline Phases Formation in Surface of Titanium Treated Thermochemically by Plasma N2 - Ar - O2
Author(s) Danilo Cavalcante Braz, Julio César Pereira Barbosa, Antonio Nunes Filho, Ricardo César da Silva Rocha, Natália de Freitas Daudt, Clodomiro Alves Junior
On-Site Speaker (Planned) Julio César Pereira Barbosa
Abstract Scope This study shows a relation between the behavior of active species of the plasma with the properties of titanium surface. To this end, active species such as N2+ (391.4) and O (842.6) were analyzed by optical emission spectroscopy (OES) in plasma produced by an N2 - Ar - O2 gas mixture. Nitrogen and Argon flow was fixed at 1 and 4 sccm, respectively and oxygen flow ranged between 2 and 4 sccm. It was observed that active species influenced surface properties after thermochemical plasma treatment. The N2+ (391.4 nm) species showed more effective in the nitride phases formation. Roughness was higher when species were more energetic. Hardness was higher at greater N2+ (391.4) concentrations. Surface tension measurements were higher for more energetic plasma. While N2+ (391.4) most influenced the dispersive component, O (842.6) had the greatest influence on the polar component.
Proceedings Inclusion? Definite: A CD-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A10: Mechanical Properties and Weld-Ability of Laser Welded Metal Bellows
A11: Application of Laser Seam Tracking for Laser Welding the OuterJoint of Bellows
A12: In Vitro Evaluation of Three-Dimensional PCL-Bioactive Glass Scaffolds Prepared by Robocasting
A13: In Vivo Evaluation of Zirconia Toughened Alumina Ceramics
A14: Influence of Plasma of Nitrogen (N2), Methane (CH4), Argon (Ar), Oxygen (O2) and Hydrogen (H2) in Surface of Chitosan Membranes
A15: Optical Properties of Dental Bioceramics Evaluated by Kubelka-Munk Model
A16: Analysis of Surface Physic-Chemical Properties of Titanium Heat Treated
A17: Morphology Variations of GaN Nanowires and Devices
A18: Effect of Local Alendronate Delivery on In Vivo Osteogenesis From PCL Coated 3D Printed β-TCP Scaffolds
A19: Surface Plasmons of SiO2@Au@SiO2 Concentric Nanoparticles Embedded in Low Temperature Synthesized TiO2 Films
A1: Influence of Conductive Polymer on Performance of MIP Terpene Sensors
A20: Study of the Biocompatibility of the Surfactant of Iron Oxide Nanoparticles
A21: Synthesis and Characterization of -Tricalcium Phosphate / Glutamic acid
A2: Fabrication of Bio-Structures Via Microbubbling
A3: Synthesis and Characterization of Poly(2-Ethyl-2-Oxazoline)-Polycaprolactone Blends for Tissue Engineering and Drug Delivery Application
A4: Viscoelastic and Mechanical properties of Polylactide Based Bio-Composites
A7: On-the-fly System Design for High Precision/Ultra Fast/Wide Area Fabrication
A8: Preparation and Characterization of Injectable Bone-Filling Chitosan-Silicate Hydrogels with Nano-Size Hydroxyapatite
B10: Texturing and Anisotropic Properties of Borides Ceramics via Strong Magnetic Field Alignment
B11: Characteristics of Gadolinia-Doped Ceria Films Deposited by Spray Pyrolysis
B12: Effects of Dopant on Flash-Sintering Behavior of Alumina
B13: Ionic Conductivity of Doped Ceria Thin Films Using Different Electrode Configurations
B15: Microwave Sintering of Carbide and Oxide Nanomaterials
B17: Characteristics of Liquid Silicon Infiltrated C/C-SiC Composite Using Carbon Nano Tube or Fiber Grown C/C
B18: Characteristics of Si-Based Alloys (Ti, Co, Al and Mo) Infiltrated C/C-Si-Alloy Composite Material
B19: Fabrication and Characteristic of SRBSN(Sintered Reaction Bonded Silicon Nitride) with Y2O3 and Al2O3 by Pressureless Sintering
B1: Structural and Proton Conductivity Studies on Phosphosilicate/Heteropolyacid Based Composite Membranes
B20: Characterization of Multi Layered Reactors to be Used for Flue Gas Purification
B21: Formation and Mechanical Properties of Porous Silicon Carbide Ceramics from Silicon and Carbon Mixture
B22: Characteristics of Ni-Co-Yttria Powder Synthesized by an Organic-Inorganic Solution Route (PVA) at Low Temperature
B23: Sonochemical Methods for Ceria and Zirconia Colloid Synthesis
B24: Tailoring the Porosity and Shrinkage of Extruded MGO Support Tubes For Oxygen Separation Membranes by Thermoplastic Feedstock Development
B25: Direct Quantitative Elemental Analysis of High Purity Aluminum Oxide Materials by Glow Discharge Mass Spectrometry
B26: Uniform Melt State Process™ For The Production Of Metastable Nanomaterials
B27: The Eulytite Phase (Bi4Ge3O12) Crystallization on Bismuth Germanate Glasses below Its Glass Transition Temperature
B28: Printing in Lead Oxyfluoroborate Glasses Trough the Electrochemically Induced Crystallization Process
B29: Transport Studies of Electrodes/Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells
B2: Investigation of Increasing Titanium Dioxide on Structural Changes in SiO2-TiO2-Na2O Glass by FTIR Spectroscopy
B30: Infrared Spectra and X-Ray Photoelectron Spectroscopy Study of Ce3O2-Na2O-GeO2 Glasses
B31: In-Situ Oxygen Surface Exchange Coefficient Determination via a New Bi-layer Curvature Relaxation Measurement Technique
B32: An Easy Solution-Based Route to Synthesize Multielement Ferrites and Their Magnetic Properties
B33: Methods of Increasing the Dynamical Strength of Glass Containers
B34: Impedance Spectroscopy: Extracting Models
B35: A Simple Aqueous Solution Route to Ultrasmall SnO2 Nanoparticles
B36: Engineering of Amorphous Granite
B37: Low Temperature Spin-Sprayed Al Doped ZnO Thin Films
B38: Reactive Sintering of Tungsten Carbide with Stainless Steel-Aluminum Binders
B39: Reaction Bonded Cf/SiC Composite Fabrication by Nano-Slurry Infiltration Process
B3: Fracture Mechanics of Composite Materials Recycled Pet-Based Reinforced with Zinc Particles
B40: The Properties of Austenitic Stainless Steel Reinforced with Titanium Diboride Sintered by the HT-HP Process
B41: Phase-Field Modeling of Defect Transport and Current Response in Semiconducting Ferroelectrics
B42: Cathode Ray Tube Glasses in Glass Ceramics
B43: Surface Tension of B2O3 with High Wetting Glass Systems
B44: Photoelectrochemical Water Splitting with Co-Doped Al and N ZnO:(Al,N) Thin Films
B45: Preparation of Organically-Modified Borosiloxane Copolymers via Solvent-Free Reaction for Protective Coatings
B46: Solar Driven Hydrogen Production with ZnO:GaN Films
B47: An Experimental Study on the Effect of Particle Geometry on the Dissolution Behavior of Glasses
B48: Fast Sintering of SnO2 Nanoparticles after Chemical Lixiviation
B49: Typical Microstructures of Flash-Sintered 8 Mol % YSZ
B4: Dielectric and Ferroelectric Characteristics of Ba0.90Sr0.10TiO3 Ceramics Co-Doped with Bi2O3 and Nb2O5
B50: Characterization of the Conductive Layer Formed during μ-Electric Discharge Machining of Non-Conductive Ceramics
B5: Forming Mullite-Ceramics Reinforced with ZrO2-t Starting from Mullite-ZrO2-t and KYANITE-Al2O3-ZrO2-t Mixtures
B6: Isothermal Transformation Induced by Point Defect in Ferroelectric Pb(1-x)Lax(Zr0.4Ti0.6)(1-x/4)O3 System
B7: Synthesis and Electrical Properties of K2NiF4-Type (Ca2-xLnx)MnO4 (Ln=Nd and Sm)
B8: Monitoring Oxygen Diffusion in Gd-Doped Ceria by Null Ellipsometry with Lock-In Detection
C10: Synthesis and Characterization of Polyvinylidene Fluoride (PVDF) Cerium Doped
C11: Synthesis of Different Nanostructures from a Stable, Aqueous TiO2 Dispersion for Photocatalytic and Biomedical Applications
C12: Temperature Stability of (Ba1-xSrx)(Ti1-yZry)O3 System with Additions of Multiple Oxides
C13: Anisotropic Behavior of Thermal Diffusivity of Ceramic PLZT 10/65/35 Induced by Electric Field
C14: Development of Composite in PVDF Matrix
C15: Preparation and Characterization of Nanohybrids of Magnetic Montmorillonites
C16: Strong Magnetoelectric Coupling in Low-Temperature Synthesized Fe3O4/ZnO Thin Film Multiferroic Heterostructures
C17: Voltage Impulse Induced Bistable Magnetization Switching and Giant Converse Magnetoelectric Coupling and in FeGaB/Pb(Zn1/3Nb2/3)O3-6%PbTiO3 Multiferroic Heterostructures
C18: Thermodynamic Study on PbxSr1-xTiO3 Ferroelectric Thin Films
C19: Dissolution Behavior of Cu Under Bump Metallization in Ball Grid Array Structure Sn-3.0Ag-0.5Cu/Cu Joints during Liquid Isothermal Aging
C1: Study of High Temperature Phase of Zirconia Film Made by the Aerosol Gas Deposition Method
C21: Multiphysics Computational Study of Tubular Piezoelectric Materials of Hexagonal Geometry
C22: The Influence of Rare-Earth Additives on Batio3–Ceramics Properties
C23: Temperature Dependant Magnetoelectric and Magnetodielectric Properties of NiFe2O4/Pb(Zr,Ti)O3/NiFe2O4 Composite
C24: Electro-Optic Properties of PLMN-PT Ceramics Doped with Earth Rare
C25: Synthesis, Magnetic and Microwave Absorbing Properties of Nanocrystalline Sr(0.8) Ca (0.2) (TiNi)(x) Fe(12-2x) O(19) in the 8–12 GHz Frequency Range
C2: Electrochemical Synthesis and Characterization of Pt Nanoparticles on ITO Substrate: Morphological Effect on Ammonia Oxidation
C3: Combinatory and Standalone Illumination and Electrical Stress Testing of Indium Gallium Zinc Oxide Thin Film Transistors
C4: Stability and Topological Transformations of Liquid Droplets on Vapor-Liquid-Solid Nanowires
C5: The Study of Hydrothermal Synthesis of M-Type Barium Ferrite
C6: Thermodynamic Modeling of the La2O3-TiO2 Pseudo-Binary System
C7: A Mesoscopic Description of Ferroelectric Relaxor Ceramics
C8: Synthesis of Ferroelectric Composites Based on PVDF Polymers and PLZT Ceramics
C9: Molten Salts Activated by High Energy Milling: a Useful, Low-Temperature and Simple Route to Synthesize BiFeO3-Based Multiferroic Compounds
D10: Development of Thick Gd2O3 Films for Use in Neutron Detection
D11: Thermodynamic and Electrochemical Properties of the Mg-Mn-Si-O System for Mg Battery Application
D12: Density Functional Study of Uranium-Niobium System
D13: Efficient Photo-splitting of Water on the Surface of Nanowires Iron Oxide (n-Fe2O3) and Carbon Modified (CM-n-Fe2O3) Thin Film Electrodes Under Solar Simulated Light
D14: The Performance of Solid Oxide Fuel Cell and Solid Oxide Electrolyzer Cell Nano-Composite Electrodes Operating Under Bias: Measurements and Modeling
D15: Facile Synthesis and Electrical Properties of BIMEVOX (ME = Co, Ni and Cu) Materials: Metathesis Reaction Activated by Mechanical Milling
D16: Surface Modifications of 316L Stainless Steel for Improved Resistance to Surface Initiated Failure
D17: Thermal Measurements of 3- and 4-Phase Ceramic Composites Using OOF2 Analyses
D18: Pure and Doped Ceria Nanoparticles for Green Natural Gas Combustion
D19: Optimization of Crystallographic Texture of Generation IV CANDU Reactor Pressure Tube
D1: Conductivity Measurement of b”-Alumina for AMTEC Application
D20: The Effects of ã Radiation in Glasses Intended for the Immobilisation of UK ILW Nuclear Wastes
D21: An Ultrasonically Induced Wet Chemistry Route to Gd2-xCaxTi2O7 Ionic Conductors
D22: Phase Field Model of Li Dendrite Formation in Lithium Ion Batteries
D23: Simulation of Pyroelectric Frequency Dependent Energy Conversion
D24: Energy Processes and Nanomaterials: Interfacial Synergy
D25: Analysis of The Theory of Frequent Charge Collapses in a 25500KVA Hermetic Calcium Carbide Furnace
D2: Effect of Crystallographic Orientation after Ga+ Ion Irradiation: Microstructure Evolution and Simulations
D3: Heap Acid Leaching of Uranium Ore-Application of Fractional Factorial Experiments
D4: MAX Phase Response to Neutron Irradiation
D5: Synthesis of New Derivatives of Rhodanine Dyes for Dye-Sensitized Solar Cells (DSSCs)
D6: Viscosity of Ethylene Glycol+Water Based Al2O3 Nanofluids with Addition of SDBS Dispersant
D7: Fabrication of Tungsten, Tungsten-Rhenium and Tungsten-CeO2 Materials Via Pulsed Electric Current Sintering
D8: Fabrication and Characterization of Delafossite CuFeO2 p-n Junctions for Photovoltaics
D9: Electrode Development for All-Ceramic Lithium Ion Batteries
E10: First-Principles Calculations of Oxygen Diffusion Coefficients in Nickel
E11: Evolution of the Grain Boundary Character Distribution During Grain Boundary Engineering of High Purity Ni
E12: Ferroelectric Domain and Domain Boundary Mapping
E13: Effect of Indenter Geometry on Time-Dependent Mechanical Behavior of Nanostructured Materials
E14: Grain Boundary Misorientation Statistics in Polycrystalline Ni-Bi
E15: Study of Grain Boundaries across a Fracture Surface Using X-ray Tomography and High Energy X-Ray Diffraction Microscopy
E16: In-Situ TEM Observation of Abnormal Grain Growth in Nanocrystalline Iron
E17: The Thought and Process on Coal Side BFG Flux Display Eorr Cases Analyse and Disposal of Old Districts 1st Coal Oven
E18: The Coal Side BFG Flux Display Eorr Cases Analyse of Old Districts 1st Coal Oven
E1: Phase Diagram Study of Au-Al-Cu at 500°C
E20: Study on Cavitation Erosion Mechanism in Friction Stir Processed Mild Steel
E21: Cast Iron Casing Cracking Due to Chunky Graphite Formation
E22: Dynamic Thickness Variation on Wide-Window Lamellae for High Volume and Fast Turnaround Automated Inline TEM Sample Preparation
E23: Stress Corrosion Cracking in Brass Alloys
E24: Metal Particles Causing Malfunctioning in Electronic Assemblies
E25: Laboratory Activities Relates to Marine Corrosion: Search for Damages Causes
E26: Development of Crack Resistant Carbon-Fiber Reifocred Latex Modified Concrete for Bridge Decks
E27: An Analysis of a "High Cycles Fatigue" Failure Suspension Knee Bearing Used in Special Belgian Heavy Duty Trailers
E28: The Researching and Modeling of Physical-Chemical Properties of Ni-Base Alloys in SHS Conditions
E29: Analysis of Fractured Ti-6Al-7Nb Collars
E2: Study of the Effect of Pinning Particles on Grain Size Distributions Compared with the Smith-Zener Model
E30: Characterization of Alumina Powders during Compaction Using In-Situ Electrical Measurements
E31: Microstructure Study on Tensile Fracture Surface Kenaf Composite with Different Composition
E32: The Simulation of Extrapolated Uniaxial and Multiaxial Creep Experiments
E33: Failure Analysis in the Undergraduate Curriculum at Wright State University
E35: The Effect of Water Immersion on Surface Fracture of Kenaf Composite
E36: Aligned Carbon Nanotubes Grown on 3-Dimension Carbon Foam Structure Using Floating Catalyst Chemical Vapor Deposition.
E37: Porous Sprayer for Degassing of Molten Aluminium
E38: Structural, Mossbauer and Magnetic Properties of Z-Type Ferrite Nanoparticles
E39: Metallurgical Examination of Impulsively Loaded Vessels
E3: Grain Boundary Character Distributions in Isostructural Materials
E40: An In-Situ X-Ray Diffraction Study of Reduction of Nickel Oxide by Hydrogen
E4: Ti-Cu-Ni-Si Phase Diagram in Ti-rich Region
E5: Enthalpies of Formation and Lattice Parameters of Heusler Alloys GaNi2X (X=Hf, V, Nb, Ta, Fe)
E6: Characterization of Stress Hot Spots
E7: Microstructural & Electrochemical Study of 2205 Duplex Stainless Steel Weldments
E8: Effect of Multi-Passes on Microstructure and Electrochemical Behaviour of Weldments
E9: Improving the Confidence Level of TEM-Based Orientation Maps
F10: Optimization of Microstructure and Properties of High Strength Spring Steels
F11: Microstructural Evolution During Coiling Process in Thermomechanically- Processed Low-Silicon Multiphase TRIP-Assisted Steels
F12: Process and Mechanism of Producing Ferro-nickel Nuggets with the Carbon-containing Pellets of Laterite Nickel Ore
F1: The Practice of The Reheating Process and Mathematical Model of Special Materials Slabs
F2: Development of the On-Line Mechanical Property Prediction System for Stainless Steel
F3: Microstructural and Mechanical Properties of Fe-30Mn - 2.3Si - 5Al TWIP Steels
F4: Microstructure and Mechanical Properties of Mn-Based Maraging Steels for Automotive Applications
F5: Study on the Change Law of Microstructure of T91 Steel During Aging at 750℃
F7: Deformation and Recrystallization of a Fe-17% Cr Ferritic Stainless Steel
F8: Formation of Inclusion in Low C-Mn Steel by Ti-Al Complex Deoxidization
F9: Effcet of Hot Rolling Process on Microstructure and Mechanical Properties of Q345B Steel
G10: Mitigation of Corrosion in Cation Exchanger Vessel
G11: Interpretation of the Relaxation Potential Profile of an ac-dc-ac Test
G1: Study of DLC-Ag Films Deposition by Plasma Assisted Technique
G2: Synthesis and Characterization of Plasma Polymerized Thin Films Deposited From Benzene and Hexamethyldisiloxane Using (PECVD) Method
G3: Tribological Properties of MoS2-Ti Coated Steel in Vacuum and Atmospheric Environments
G4: Superficial Modification Related to Optical Intensity of Plasma Species on Peaces of Ti into N2 – Ar – CH4 Gas Mixture
G5: Impact of Ion Implantation on Metal Transfer Under Ambient Conditions
G6: Corrosion Resistance of E-Coat on Cerium Conversion Coated Mg, Al, and Galvanized Steel Couples
G7: Optimization of Plasma Electrolytic Oxidation Coating of AZ91 Mg Alloy by Considering Electrical Parameters
G8: Low-Cost Corrosion Monitoring Sensors Based on Radio Frequency Identification (RFID) Technology
G9: The Protection of Iron Reducing Bacteria (IRB) against the Corrosion of API 5L X52 Linepipe Carbon Steel
H10: Pop-in and Creep Behavior of ZnO Single Crystal during Spherical Nanoindentation
H11: Crystalline Approximants of SiCO: Implications on Structure and Thermochemistry of Ternary Silicon Oxycarbide
H12: Compounds in the System HfO2-SiC-SiO2
H13: Impact of Tungsten on Structure and Thermodynamics of Borosilicate Melts
H14: Improvement of Stress-Rupture Property by Heat Treatment in a Single Crystal Ni-Based Superalloy DD102
H15: Relationship among Microstructure and Microhardness of a Nickel-Based Superalloy Manufactured by Powder Metallurgy
H16: Microstructural Evolution and Its Affect on Mechanical Properties of the Rejuvenated GTD-111 Superalloy by Applying Different HIP Temperatures
H17: Study of the Grain Size Distribution and Mechanical Properties of Ni-Co-Cr-Mo Based Superalloy Deformed at High Temperature
H18: Comparaison of a Gamma Titanium Aluminide Fabricated by LENS, SLM and EBM Techniques
H19: Self-protective Alloy Treatment for Extreme Environments
H1: Polypropylene Tensile Test under Quasi-Static and Dynamic Loading
H20: New Ceramic-matrix Composite for Low Voltage High Energy Plasma Generation. Application to Isopropanol and Ethylene Degradation by a Point-to-Plane Discharge at Atmospheric Pressure
H21: On the Fabrication of Chitin-carbon Nanotube Composites
H22: Modeling of Gas Flow and Turbulence in Atmospheric Pressure PECVD Setup for the Deposition of Amorphous (SiNxH) Coatings in Argon
H23: Processing of Aluminum Wires Treated with Diboride Particles and Its Effect on their Electrical and Mechanical Properties
H24: Modeling of Effective Thermal Conductivities of Fe-Ni Alloy Series as a Function of Temperature in the Liquid Region
H2: Triboluminescent Smart Sensors for Structural Health Monitoring
H3: Influence of Plasma Species on the Cristalline Phases Formation in Surface of Titanium Treated Thermochemically by Plasma N2 - Ar - O2
H4: Effect of Hot Rolling Process on Microstructure and Mechanical Properties of Q345B Steel
H5: Modeling of the Bending Actuation of a Shape Memory Composite
H6: Tribological Properties Modification of Titanium by Plasma Carbonitriding
H7: Synthesis and Electrochemical Performance of SiOC-Carbon Nanotube Composite Coatings
H8: Processing and Characterization of NiTi-MAX Phase Composites Prepared by Spark Plasma Sintering
H9: Application of Ludwigson Function for the Work Hardening Curves Analysis of Composite
J10: Characterization of Residual Coarse Defects in Translucent Alumina Ceramics
J11: A New Method for Producing Titanium Dioxide Pigment – Eliminating Direct CO2 Emissions
J12: A Modified Pidgeon Process for Energy Savings and Low Carbon Emission
J13: Enhancing the Physical and Chemical Properties of Ceramic Teeth by Doping Boric Acid and Calcium Hexaaluminate
J14: Synthesis and Characterization of Porous Titania through Powder Metallurgy
J15: Laser Surface Modification of Lean-Alloyed Austenite Stainless Steel for Corrosion Resistance
J1: A Research the Structure Al-Containing Nanocomplexes Screened Polymeric Cover of Natrium-Carboxymethylcellulose
J2: Evaluate the Microstructure Changes of the Cyclic Sintered Nd-Fe-B Magnets by Transmission Electron Microscopy Analysis
J3: Joining of Large-scaled Silicon Nitride Ceramics
J4: Low-Temperature Synthesis and Characterization of Er and/or Dy Doped LaAlO3 Nanopowders
J5: Electrical Conductivity of Diesel-Biodiesel Blends Evaluated by the Impedance Spectroscopy Technique
J6: Nano-Structures of β-SiC Formed by Rice Husk Pyrolosis
J7: Effect of the Process Temperature on Ti Powder Characteristics Fabricated by Hydride-Dehydride Method from Ti Scraps
J8: Micro Fabrication of Metallic and Oxide Glasses for Terahertz Wave Photonic Crystals
J9: Preparation of Oriented by High Magnetic Field BNBT

Questions about ProgramMaster? Contact programming@programmaster.org