ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Advances in Surface Engineering II
Presentation Title Surface Chemistry and Subsurface Microstructure after Spot-by-spot laser-interference Processing of Al 2024-T3
Author(s) Adrian S. Sabau, Harry M. Meyer, Donovan N. Leonard
On-Site Speaker (Planned) Adrian S. Sabau
Abstract Scope For adhesive joining and coating applications, non-chemical surface preparation techniques are needed to reduce the environmental impact and associated costs with chemical surface preparation. In this study, a laser-interference technique was employed for surface preparation of Al 2024-T3. The laser-interference power profile was created by splitting the beam and guiding both beams on the same spot, creating a line-interference pattern on the specimen surface. The specimens were laser-structured in the as-received condition with no additional surface preparation steps. The x-ray photoelectron spectroscopy was used to assess the “cleaning” of the surface and the extent of oxide layer regrowth. the scanning electron microscopy STEM was used to characterize the sub-surface microstructure modifications, such as the depth of heat-affected zone and precipitate dissolution. The scanning electron microscopy was used to assess changes in morphology of the Al surface, such as smoothing out of the sharp features in the as received Al sheet.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Characterization of Precipitates Evolution in Laser Assisted Cold Spray of AA7050 and AA7075
Contact Angle Measurement Comparisons of Common Additive Materials and Processes
Electroplating Powder for Cold Spray Applications
Enhanced Bond Durability of 7xxx Automotive Alloy by Surface Modification
High Temperature Oxidation Behaviors of SiON Coated AISI 441 in Different Atmospheres
Investigation on the Laser Surface Treatment of Steel and Aluminum with a Single Mode Pulsed Fiber Laser Source
Laser Assisted Cold Spray Applied to Austenitic Stainless Steel
M-50: The Synchronous Suppression - Reinforced Dispersion Behaviors of Regulators on Micro Fine Ilmenite and Titanaugite
Mitigation of Asphaltene Deposition on Pipeline Alloy Steel Using Low-temperature Pack Aluminization
Morphological Control of Tantalum Carbide through Surface Doping
Multilayer, Multifunctional Thermal Coatings Enabled by Layered Manufacturing
Pulse Potentiostatic Deposition of Fe-Zn based Intermetallic Coatings and Evaluation of its Catalytic Activity for Hydrogen Evolution Reaction
Surface Characterization and Mechanical Properties of Cr-coated Zr-4 Accident Tolerant Fuels Cladding Prepared using Different Coating Techniques
Surface Chemistry and Subsurface Microstructure after Spot-by-spot laser-interference Processing of Al 2024-T3

Questions about ProgramMaster? Contact programming@programmaster.org