3-D Microstructural Distribution and Mechanical Analysis of HPDC Hypereutectic Al-Si Alloys via X-ray Tomography

Advanced Characterization of the Cyclic Deformation and Damage Behavior in Al-Si-Mg Cast Alloys using Hysteresis Analysis and Alternating Current Potential Drop Method

Clustering Behavior of Al-Mg-Si Alloys with Ag and Cu Addition during Natural and Artificial Aging

Comparative Electrochemical and Intergranular Corrosion-resistance Testing of Wrought Aluminium Alloys

Comparison of Diversified Casting Methods on Mechanical and Microstructural Properties of 5754 Aluminum Alloy for Automotive Applications

Comparison of the Effects of B4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method

Conditions for Retrogression Forming Aluminum AA7075-T6 Sheet

Coupled Fluid Flow and Heat Transfer Analysis of Ageing Heat Furnace

D-39: Development of High Thermal Conductivity Aluminum Alloys for the Integrated Plastic / Metal Molding (IMKS)

D-40: Effect of Alloying Elements on the Thermal Conductivity and Other Properties of Aluminum Alloys Developed as Casting Alloys

D-41: Effect of Cu Addition on the Microstructure, Mechanical and Thermal Properties of an Al-Si Piston Alloy

D-43: Effect of Rare Earth Metals on Microstructure and Mechanical Properties of Aluminum alloys Processed by Extrusion

D-44: Effects of Alloying Elements on Mechanical and Thermal Characteristics in Al-Si-Mg-(Cu) Foundry Alloys for Automotive Engine Components

D-45: Effects of Sc and Zr Addition on Microstructure and Mechanical Properties of Al-3Cu-2Li Alloy

D-46: Effects of the Strontium Addition on Microstructure Mechanical Properties of Sand Casting A356 Alloy during Solution Treatment

D-47: Effects on Microstructure Evolution of Al-9Si-0.3Mg Alloy by Pyrometallurgically Produced Sr Master Alloy

D-48: High Strength and Corrosion Resistant Al Alloys at High Temperature

D-49: Improvement of the Mechanical Properties of the Aluminum Alloy 7075 by ARB

D-50: Investigation of the Microstructure and Mechanical Properties of Cast AA7068 Hybrid Nanocomposite Reinforced with GNPs and SiC

D-51: Microstructure Characterization and Properties of Cast Al-Si-Fe-Zn Alloys with High Thermal Conductivity

D-52: Modification of A7075 Alloy for Improved Extrudability

D-53: Relationship between Si Content and Activation Energy of Si Precipitation in Al-Si Alloys

D-54: Strengthening Behaviour of Al-Si Alloy Containing Oxygen Atoms

D-55: Study on Microstructure and Mechanical Properties of Al-Zn-Cu Based Alloys with Additive Elements using Extrusion

D-56: The Effect of Ag on the Microstructures and Properties of Al-Mg Alloys

D-57: Effect of Multi-pass Friction Stir Welding on the Microstructure, Mechanical and Wear Properties of AA6061/CNTs Nanocomposites

D-59: Evaluation of β-phase Formation in 5xxx Aluminum Alloys

D-60: Examination of Formability Properties of 6xxx Alloy Extruded Profiles for the Automotive Industry

D-61: Improvements for The Recognitionn Rate of Surface Defects of Aluminum Strips

D-62: Influence of CNTs Nanoparticles Incorporation to Friction Stir Welded 6061Aluminum Alloy on the Microstructure and Shear Punch Properties

D-63: Investigation of Mechanical Properties for 7075 Aluminum Alloy using Friction Stir Welding (FSW) Reinforced with CNTs

D-64: Mechanical Characterization of Cold Sprayed Aluminum Alloy Powders Using In Situ Micropillar Compression and Tension

D-65: Microstructure and Surface Finish Evolution During Incremental Sheet Forming of AA 7075

D-66: Microstructures and Mechanical Properties of Low Si Content Al-Si-Mg Alloy

D-67: Primary Si Refinement in Hyper-eutectic Al-Si Alloys Using Metal-oxide Particles

D-68: Production of Commercially Pure Aluminum Electrical Conductor Strips via a Single-step, Machining-based Technique

D-69: The Effects of T6 Heat Treatment and Extrusion Process on the Microstructure and Wear Behavior of Al7068 Aluminum Matrix Hybrid Nanocomposites Reinforced with GNPs and SiC Nanoparticles

D-70: The Preparation Methods and Application of Aluminum Foam

D-71: The Role of In Situ Stacking Faults in the Deformation Mechanism of I-Al

D-72: Through-thickness Strain Gradient in a Hot Rolled Al-Mg Alloy Obtained by Nanoindentation and Glancing Angle X-ray Diffraction

Determination of the Intermetallic α-Phase Crystal Structure in Aluminum Alloys Solidified at Rapid Cooling Rates

Die-casting and Recyclability of LREE Aluminum-Cerium Alloys

Effect of Mg and Si Content in Aluminum Alloys on Friction Surfacing Processing Behavior

Effects of Zr Additions on Structure and Microhardness Evolution of Eutectic Al-6Ni Alloy

Elevated-temperature Low Cycle Fatigue Behaviors of Al-Si 356 and 319 Foundry Alloys

Fabrication and Characterization of Open Cell Aluminum Foams by Polymer Replication Method

High Conductivity AlSi7Mg (A356) Alloys – Market, Production, Optimization and Development

Impact of the Main Casting Process Parameters on Floating Crystals in Al Alloys DC-Cast Ingots

Influence of Die Soldering on Die Erosion and Soldering Layer between Al Melts and Die in Al-Si-Fe Alloys

Influence of Microstructure Development on Mechanical Properties of AlSi7MgCu Alloy

Mechanical Properties Evolution for 8xxx Foil Stock Materials by Alloy Optimization-literature Review and Experimental Research

Microstructure and Mechanical Properties of an Al-Zr-Er High Temperature Alloy Microalloyed with Tungsten

Multi-component High Pressure Die Casting (M-HPDC): Temperature Influence on the Bond Strength of Metal-plastic-hybrids Manufactured by M-HPDC

Nature of Grain Boundary Precipitates and Stress Corrosion Behavior in Al 7075 and 7079 Alloys

Numerical Modelling, Microstructural Evolution and Characterization of Laser Cladded Al-Si-Sn Coatings on Ti-6Al-4V Alloy.

On Microstructures, Textures and Formability of AA6xxx Alloy Sheets from DC and CC Processing

Production of the AA2196-TiB2 MMCs via PM Technology

Prototyping of a High Pressure Die Cast Al-Si Alloy Using Plaster Mold Casting to Replicate Corresponding Mechanical Properties

Reduction of Aluminium Ingot Cooling Time in DC Casting Process

Residual Stress Characterization for Marine Gear Cases in As-cast and T5 Heat Treated Conditions with Application of Neutron Diffraction

Retrogression-reaging Behavior in Aluminum AA6013-T6 Sheet

Study on Tensile Behavior of High Vacuum Die-cast AlSiMgMn Alloys

The Effect of High Speed Direct Chill Casting on Microstructure and Mechanical Properties of Al-Mg-Si-Fe Alloy

The Effect of Manganese and Strontium on Iron Intermetallics in Recycled Al-7% Si Alloy

The Effects Manganese (Mn) Addition and Laser Parameters on the Microstructure and Surface Properties of Laser Deposited Aluminium Based Coatings

The Effects of Solidification Cooling Rates on the Mechanical Properties of an Aluminum Inline-6 Engine Block

The Influence of Quenching and Stretching Process Conditions of Aluminium Alloy Plates on Residual Stresses

The Influence of the Distance Between the Plate and the Top Nozzles during the Soft Quenching Process of the 6061 Aluminium Alloy Plates

Understanding the Role of Cu and Clustering on Strain Hardening and Strain Rate Sensitivity of Al-Mg-Si-Cu Alloys

Questions about ProgramMaster? Contact programming@programmaster.org