ProgramMaster Logo
Conference Tools for 2013 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2013 TMS Annual Meeting & Exhibition
Symposium Friction Stir Welding and Processing VII
Presentation Title Comparison between Friction Stir and Submerged Arc Welding applied to Joining DH36 and E36 Shipbuilding Steel
Author(s) Stephen Cater, Jonathan Peter Martin, Alexander M Galloway, Norman A McPherson
On-Site Speaker (Planned) Jonathan Peter Martin
Abstract Scope With the impending development of FSW tools for steel with useful lifetimes, attention has turned to the mechanical properties of the welds that can be made in a range of industrially significant steels. This work reports on a comparative study undertaken to examine the use of friction stir and submerged arc welding on DH36 and E36 shipbuilding steels. The study made an assessment of the distortion induced in fabricating plates by the two welding techniques, and provides initial comparative data on weld tensile strength, toughness and fatigue life. In each case, friction stir welding was shown to outperform submerged arc welding.
Proceedings Inclusion? Planned: A print-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Coupled Thermal/Material Flow Model of Friction Stir Welding Applied to Sc-Modified Aluminum Alloys
Advances in Temperature Control of FSP
Aluminum Tailor-Welded Blanks for Automotive Applications
An Innovative Process Applied to the Joining of Steel to Aluminum in a Lap-Joint Configuration
Analysis of Mechanical and Metallurgical Properties of Friction Stir Butt Welded AA2024
Analysis of Tool Feedback Forces and Material Flow during Friction Stir Welding
Comparison between Friction Stir and Submerged Arc Welding applied to Joining DH36 and E36 Shipbuilding Steel
Defect Identification in FSWs Using Data Analysis Techniques
Effect of a Two-stage Tool Probe on the Mechanical Strength and Macrostructure of Friction Stir Spot Welded Aerospace Alloys AA 7075 and AA 2024
Effect of Corrosion in NaCl-Based Solutions on the Mechanical Properties of Friction-Stir Welded AZ31B Sheet
Effect of Friction Stir Processing on Armor Grade Materials
Effect of Friction Stir Processing on Room Temperature Forming of AZ31 Alloy
Effect of Initial Microstructure on the Microstructural Evolution and Joint Efficiency of a WE43 Alloy during Friction Stir Welding
Effect of Post-weld Aging on the Corrosion Resistance and Mechanical Properties of Friction Stir Welded Aluminum Alloy 7475-T73
Effect of Process Conditions on Friction Stir Spot Welding of ZEK100 Mg Alloy
Effect of Process Parameters on the Microstructure and Mechanical Properties of Friction Stir Welded 2050-T3 Al-Li Alloy
Effect of Tool Pin Features and Geometries on Quality of Weld during Friction Stir Welding
Effect of Tool Pin Profile on Microstructure and Mechanical Properties of Friction Stir Welded Pure Copper Joints
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded 11Cr-Ferritic/Martensitic Steel
Effects of Advancing and Retreating Side Alteration during Power and Temperature Controlled FSW of Copper Canisters
Enhanced Friction Stir Welding of Titanium Using Elemental Foils
Establishing W-Based Friction Stir Welding Tool Life for Thick Section Steel Applications
Evolution of Micro-Texture in Friction Stir Processed Mg-4Y-3RE Alloy
Fabrication of Carbon Nanotube Reinforced Aluminum Matrix Composites Via Friction Stir Processing
Fabrication of Light-Weight, High Thermal Conductivity Metal Matrix Composites Using Friction Stir Processing
Fatigue Behavior of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels
Finite Element Evaluation of Residual Stresses Developed in Friction Stir Welded Tube-Tubesheet Joint
Finite Element Modeling of High Speed Friction Stir Spot Welding
Flow Behavior of SiC Particles as Tracer Material during the Fabrication of MMCs by Friction Stir Processing
Friction Stir Processing for Mitigation of Sensitization in 5XXX Series Aluminum Alloys
Friction Stir Processing of Cast Aluminum Alloys: Seeking a Correlation between Process Parameters, Abnormal Grain Growth, and Fatigue Behavior
Friction Stir Spot Welding of Aluminum to Magnesium Alloy Sheets
Friction Stir Welding of Pipeline Steels
Influence of Heat Input on Friction Stir Welding for the ODS Steel MA956
Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Jointed Monel 400 and Inconel 600
Longitudinal and Transverse Microsample Characterization of Friction Stir Welded Ti-5111
Magnesium Based Surface Composite Via Friction Stir Processing
Material Flow and Texture in Friction Extruded Wire
Mechanical and Microstructural Properties of FSW Lap Joints
Mechanical Properties and Microstructure Characterization of Multilayered Multipass Friction Stir Weld in Steel
Mechanical Properties of Repaired 7075-T73 Friction Stir Weld Butt Welds
Metallurgical Characterization of Friction Stir Welded Aluminum Matrix Composites
Microstructural and Mechanical Investigations of Friction Stir Welded Ti/Ti- and Ti-alloy/Ti-Alloy-Joints
Microstructural Evolution in Commercially Pure Titanium Thermal Stir Welds
Microstructural Gradients and Intermetallic Compounds in Friction Stir Welding of Dissimilar Metals
Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds between AA6061 and AZ31 Alloy Sheets
Microstructure and Mechanical Properties of Friction Stir Welds of 590MPa Grade Dual Phase Steel aheets
Microstructure and Mechanical Properties of FSW Lap Joint between Pure Copper and 1018 Mild Steel Using Refractory Metal Pin Tools
Microstructure and Mechanical Properties of Oxide Dispersion Strengthened Copper Produced by Friction Stir Processing
Microstructure and Properties of Friction Stir Processed HY80 Steel
Microstructure in Dissimilar Friction Spot Weld of Al to Mg alloys Observed by Stop-Action Technique
Microstructure Refinement and Homogenization of Non-deforming Constituent Distributions During FSW/P
Modeling the Effects of Tool Geometries on the Temperature Distributions and Material Flow of Friction Stirred AA 7039 Welds
Modified Friction Stir Processing for Back Extruding Lightweight Alloy Tubes
Nano-Sized Grain Refinement Using Friction Stir Processing
Novel Applications of Friction Stir Welding and Processing in Aluminum and Magnesium Alloys
On Friction Stir Welding of Mg–Zn-Zr-RE Alloy using Threaded Tools for Aerospace Application
Optimization of Wear Rate of Friction Stir Welded Al-B4C Composite
Paradigm Shift in Control of the Spindle Axis
Process Development of Integral Fasteners Using Friction Stir Spot Welding with "C-Frame" End Effect or on an Aircraft Cabin Door Made from AA6061-T6 and AA2024-T3
Processing and Characterization of Cu-Mo Composite Via Additive Friction Stir Fabrication
Processing, Microstructure and Mechanical Property Correlation in Al-B4C Surface Composite Produced Via Friction Stir Processing
Refill Friction Stir Spot Welding of Aluminum Alloys for Aviation by Using Shoulder First Plunging Method
Studies on Additive Friction Stir In-625 Coating on HY80 Steel
System Parameter Identification for Friction Stir Processing
The Benefits and Opportunities for Friction Stir Welding and Processing within the Automotive Industry
The Friction-Stir-Welding of Carbon Steels Using a Co-Based Alloy Tool
Three-Dimensional Visualization of Metallic Flow and Control of FSW Joint Properties Using New FSP Technique
Understanding the Mechanisms that Affect Microstructural Evolution in Friction Stir Welding
Welding Processes and Mechanical Behaviors of Friction Stir Spot Welded Joints of Dissimilar Ferrous Alloys

Questions about ProgramMaster? Contact programming@programmaster.org