ProgramMaster Logo
Conference Tools for Materials Science & Technology 2012
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Propose A Proceedings
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2012
Symposium MS&T'12 Poster Session
Presentation Title G1: Study of DLC-Ag Films Deposition by Plasma Assisted Technique
Author(s) Laura Camila Diniz dos Santos, Natália de Freitas Daudt, Marina de Oliveira Cardoso Macêdo, Lucia Vieira Santos, Clodomiro Alves Junior
On-Site Speaker (Planned) Laura Camila Diniz dos Santos
Abstract Scope Diamond-like carbon (DLC) films have a lower adhesion on metallic substrates caused by high residual stress. The silver nanoparticles are added in order to improve the adhesion between film and substrate and to advance the tribological properties. In this work, DLC films with the addition of silver nanoparticles were grown on AISI 301 steel by cathodic cage discharge configuration of PACVD. The plasma atmosphere was a mixture of N2, H2 and CH4 using different power values. The deposition processes were monitored by OES to investigate the influence of the active species in the properties of the obtained films. The tribomechanical properties as the friction coefficient and the wear coefficient were analyzed by calowear, pin on disk tribometry and perfilometry. The roughness and the surface characteristics were verified by AFM. Therefore the compositions of obtained phases were analyzed by Raman and EDS.
Proceedings Inclusion? Definite: A CD-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A10: Mechanical Properties and Weld-Ability of Laser Welded Metal Bellows
A11: Application of Laser Seam Tracking for Laser Welding the OuterJoint of Bellows
A12: In Vitro Evaluation of Three-Dimensional PCL-Bioactive Glass Scaffolds Prepared by Robocasting
A13: In Vivo Evaluation of Zirconia Toughened Alumina Ceramics
A14: Influence of Plasma of Nitrogen (N2), Methane (CH4), Argon (Ar), Oxygen (O2) and Hydrogen (H2) in Surface of Chitosan Membranes
A15: Optical Properties of Dental Bioceramics Evaluated by Kubelka-Munk Model
A16: Analysis of Surface Physic-Chemical Properties of Titanium Heat Treated
A17: Morphology Variations of GaN Nanowires and Devices
A18: Effect of Local Alendronate Delivery on In Vivo Osteogenesis From PCL Coated 3D Printed β-TCP Scaffolds
A19: Surface Plasmons of SiO2@Au@SiO2 Concentric Nanoparticles Embedded in Low Temperature Synthesized TiO2 Films
A1: Influence of Conductive Polymer on Performance of MIP Terpene Sensors
A20: Study of the Biocompatibility of the Surfactant of Iron Oxide Nanoparticles
A21: Synthesis and Characterization of -Tricalcium Phosphate / Glutamic acid
A2: Fabrication of Bio-Structures Via Microbubbling
A3: Synthesis and Characterization of Poly(2-Ethyl-2-Oxazoline)-Polycaprolactone Blends for Tissue Engineering and Drug Delivery Application
A4: Viscoelastic and Mechanical properties of Polylactide Based Bio-Composites
A7: On-the-fly System Design for High Precision/Ultra Fast/Wide Area Fabrication
A8: Preparation and Characterization of Injectable Bone-Filling Chitosan-Silicate Hydrogels with Nano-Size Hydroxyapatite
B10: Texturing and Anisotropic Properties of Borides Ceramics via Strong Magnetic Field Alignment
B11: Characteristics of Gadolinia-Doped Ceria Films Deposited by Spray Pyrolysis
B12: Effects of Dopant on Flash-Sintering Behavior of Alumina
B13: Ionic Conductivity of Doped Ceria Thin Films Using Different Electrode Configurations
B15: Microwave Sintering of Carbide and Oxide Nanomaterials
B17: Characteristics of Liquid Silicon Infiltrated C/C-SiC Composite Using Carbon Nano Tube or Fiber Grown C/C
B18: Characteristics of Si-Based Alloys (Ti, Co, Al and Mo) Infiltrated C/C-Si-Alloy Composite Material
B19: Fabrication and Characteristic of SRBSN(Sintered Reaction Bonded Silicon Nitride) with Y2O3 and Al2O3 by Pressureless Sintering
B1: Structural and Proton Conductivity Studies on Phosphosilicate/Heteropolyacid Based Composite Membranes
B20: Characterization of Multi Layered Reactors to be Used for Flue Gas Purification
B21: Formation and Mechanical Properties of Porous Silicon Carbide Ceramics from Silicon and Carbon Mixture
B22: Characteristics of Ni-Co-Yttria Powder Synthesized by an Organic-Inorganic Solution Route (PVA) at Low Temperature
B23: Sonochemical Methods for Ceria and Zirconia Colloid Synthesis
B24: Tailoring the Porosity and Shrinkage of Extruded MGO Support Tubes For Oxygen Separation Membranes by Thermoplastic Feedstock Development
B25: Direct Quantitative Elemental Analysis of High Purity Aluminum Oxide Materials by Glow Discharge Mass Spectrometry
B26: Uniform Melt State Process™ For The Production Of Metastable Nanomaterials
B27: The Eulytite Phase (Bi4Ge3O12) Crystallization on Bismuth Germanate Glasses below Its Glass Transition Temperature
B28: Printing in Lead Oxyfluoroborate Glasses Trough the Electrochemically Induced Crystallization Process
B29: Transport Studies of Electrodes/Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells
B2: Investigation of Increasing Titanium Dioxide on Structural Changes in SiO2-TiO2-Na2O Glass by FTIR Spectroscopy
B30: Infrared Spectra and X-Ray Photoelectron Spectroscopy Study of Ce3O2-Na2O-GeO2 Glasses
B31: In-Situ Oxygen Surface Exchange Coefficient Determination via a New Bi-layer Curvature Relaxation Measurement Technique
B32: An Easy Solution-Based Route to Synthesize Multielement Ferrites and Their Magnetic Properties
B33: Methods of Increasing the Dynamical Strength of Glass Containers
B34: Impedance Spectroscopy: Extracting Models
B35: A Simple Aqueous Solution Route to Ultrasmall SnO2 Nanoparticles
B36: Engineering of Amorphous Granite
B37: Low Temperature Spin-Sprayed Al Doped ZnO Thin Films
B38: Reactive Sintering of Tungsten Carbide with Stainless Steel-Aluminum Binders
B39: Reaction Bonded Cf/SiC Composite Fabrication by Nano-Slurry Infiltration Process
B3: Fracture Mechanics of Composite Materials Recycled Pet-Based Reinforced with Zinc Particles
B40: The Properties of Austenitic Stainless Steel Reinforced with Titanium Diboride Sintered by the HT-HP Process
B41: Phase-Field Modeling of Defect Transport and Current Response in Semiconducting Ferroelectrics
B42: Cathode Ray Tube Glasses in Glass Ceramics
B43: Surface Tension of B2O3 with High Wetting Glass Systems
B44: Photoelectrochemical Water Splitting with Co-Doped Al and N ZnO:(Al,N) Thin Films
B45: Preparation of Organically-Modified Borosiloxane Copolymers via Solvent-Free Reaction for Protective Coatings
B46: Solar Driven Hydrogen Production with ZnO:GaN Films
B47: An Experimental Study on the Effect of Particle Geometry on the Dissolution Behavior of Glasses
B48: Fast Sintering of SnO2 Nanoparticles after Chemical Lixiviation
B49: Typical Microstructures of Flash-Sintered 8 Mol % YSZ
B4: Dielectric and Ferroelectric Characteristics of Ba0.90Sr0.10TiO3 Ceramics Co-Doped with Bi2O3 and Nb2O5
B50: Characterization of the Conductive Layer Formed during μ-Electric Discharge Machining of Non-Conductive Ceramics
B5: Forming Mullite-Ceramics Reinforced with ZrO2-t Starting from Mullite-ZrO2-t and KYANITE-Al2O3-ZrO2-t Mixtures
B6: Isothermal Transformation Induced by Point Defect in Ferroelectric Pb(1-x)Lax(Zr0.4Ti0.6)(1-x/4)O3 System
B7: Synthesis and Electrical Properties of K2NiF4-Type (Ca2-xLnx)MnO4 (Ln=Nd and Sm)
B8: Monitoring Oxygen Diffusion in Gd-Doped Ceria by Null Ellipsometry with Lock-In Detection
C10: Synthesis and Characterization of Polyvinylidene Fluoride (PVDF) Cerium Doped
C11: Synthesis of Different Nanostructures from a Stable, Aqueous TiO2 Dispersion for Photocatalytic and Biomedical Applications
C12: Temperature Stability of (Ba1-xSrx)(Ti1-yZry)O3 System with Additions of Multiple Oxides
C13: Anisotropic Behavior of Thermal Diffusivity of Ceramic PLZT 10/65/35 Induced by Electric Field
C14: Development of Composite in PVDF Matrix
C15: Preparation and Characterization of Nanohybrids of Magnetic Montmorillonites
C16: Strong Magnetoelectric Coupling in Low-Temperature Synthesized Fe3O4/ZnO Thin Film Multiferroic Heterostructures
C17: Voltage Impulse Induced Bistable Magnetization Switching and Giant Converse Magnetoelectric Coupling and in FeGaB/Pb(Zn1/3Nb2/3)O3-6%PbTiO3 Multiferroic Heterostructures
C18: Thermodynamic Study on PbxSr1-xTiO3 Ferroelectric Thin Films
C19: Dissolution Behavior of Cu Under Bump Metallization in Ball Grid Array Structure Sn-3.0Ag-0.5Cu/Cu Joints during Liquid Isothermal Aging
C1: Study of High Temperature Phase of Zirconia Film Made by the Aerosol Gas Deposition Method
C21: Multiphysics Computational Study of Tubular Piezoelectric Materials of Hexagonal Geometry
C22: The Influence of Rare-Earth Additives on Batio3–Ceramics Properties
C23: Temperature Dependant Magnetoelectric and Magnetodielectric Properties of NiFe2O4/Pb(Zr,Ti)O3/NiFe2O4 Composite
C24: Electro-Optic Properties of PLMN-PT Ceramics Doped with Earth Rare
C25: Synthesis, Magnetic and Microwave Absorbing Properties of Nanocrystalline Sr(0.8) Ca (0.2) (TiNi)(x) Fe(12-2x) O(19) in the 8–12 GHz Frequency Range
C2: Electrochemical Synthesis and Characterization of Pt Nanoparticles on ITO Substrate: Morphological Effect on Ammonia Oxidation
C3: Combinatory and Standalone Illumination and Electrical Stress Testing of Indium Gallium Zinc Oxide Thin Film Transistors
C4: Stability and Topological Transformations of Liquid Droplets on Vapor-Liquid-Solid Nanowires
C5: The Study of Hydrothermal Synthesis of M-Type Barium Ferrite
C6: Thermodynamic Modeling of the La2O3-TiO2 Pseudo-Binary System
C7: A Mesoscopic Description of Ferroelectric Relaxor Ceramics
C8: Synthesis of Ferroelectric Composites Based on PVDF Polymers and PLZT Ceramics
C9: Molten Salts Activated by High Energy Milling: a Useful, Low-Temperature and Simple Route to Synthesize BiFeO3-Based Multiferroic Compounds
D10: Development of Thick Gd2O3 Films for Use in Neutron Detection
D11: Thermodynamic and Electrochemical Properties of the Mg-Mn-Si-O System for Mg Battery Application
D12: Density Functional Study of Uranium-Niobium System
D13: Efficient Photo-splitting of Water on the Surface of Nanowires Iron Oxide (n-Fe2O3) and Carbon Modified (CM-n-Fe2O3) Thin Film Electrodes Under Solar Simulated Light
D14: The Performance of Solid Oxide Fuel Cell and Solid Oxide Electrolyzer Cell Nano-Composite Electrodes Operating Under Bias: Measurements and Modeling
D15: Facile Synthesis and Electrical Properties of BIMEVOX (ME = Co, Ni and Cu) Materials: Metathesis Reaction Activated by Mechanical Milling
D16: Surface Modifications of 316L Stainless Steel for Improved Resistance to Surface Initiated Failure
D17: Thermal Measurements of 3- and 4-Phase Ceramic Composites Using OOF2 Analyses
D18: Pure and Doped Ceria Nanoparticles for Green Natural Gas Combustion
D19: Optimization of Crystallographic Texture of Generation IV CANDU Reactor Pressure Tube
D1: Conductivity Measurement of b”-Alumina for AMTEC Application
D20: The Effects of ã Radiation in Glasses Intended for the Immobilisation of UK ILW Nuclear Wastes
D21: An Ultrasonically Induced Wet Chemistry Route to Gd2-xCaxTi2O7 Ionic Conductors
D22: Phase Field Model of Li Dendrite Formation in Lithium Ion Batteries
D23: Simulation of Pyroelectric Frequency Dependent Energy Conversion
D24: Energy Processes and Nanomaterials: Interfacial Synergy
D25: Analysis of The Theory of Frequent Charge Collapses in a 25500KVA Hermetic Calcium Carbide Furnace
D2: Effect of Crystallographic Orientation after Ga+ Ion Irradiation: Microstructure Evolution and Simulations
D3: Heap Acid Leaching of Uranium Ore-Application of Fractional Factorial Experiments
D4: MAX Phase Response to Neutron Irradiation
D5: Synthesis of New Derivatives of Rhodanine Dyes for Dye-Sensitized Solar Cells (DSSCs)
D6: Viscosity of Ethylene Glycol+Water Based Al2O3 Nanofluids with Addition of SDBS Dispersant
D7: Fabrication of Tungsten, Tungsten-Rhenium and Tungsten-CeO2 Materials Via Pulsed Electric Current Sintering
D8: Fabrication and Characterization of Delafossite CuFeO2 p-n Junctions for Photovoltaics
D9: Electrode Development for All-Ceramic Lithium Ion Batteries
E10: First-Principles Calculations of Oxygen Diffusion Coefficients in Nickel
E11: Evolution of the Grain Boundary Character Distribution During Grain Boundary Engineering of High Purity Ni
E12: Ferroelectric Domain and Domain Boundary Mapping
E13: Effect of Indenter Geometry on Time-Dependent Mechanical Behavior of Nanostructured Materials
E14: Grain Boundary Misorientation Statistics in Polycrystalline Ni-Bi
E15: Study of Grain Boundaries across a Fracture Surface Using X-ray Tomography and High Energy X-Ray Diffraction Microscopy
E16: In-Situ TEM Observation of Abnormal Grain Growth in Nanocrystalline Iron
E17: The Thought and Process on Coal Side BFG Flux Display Eorr Cases Analyse and Disposal of Old Districts 1st Coal Oven
E18: The Coal Side BFG Flux Display Eorr Cases Analyse of Old Districts 1st Coal Oven
E1: Phase Diagram Study of Au-Al-Cu at 500°C
E20: Study on Cavitation Erosion Mechanism in Friction Stir Processed Mild Steel
E21: Cast Iron Casing Cracking Due to Chunky Graphite Formation
E22: Dynamic Thickness Variation on Wide-Window Lamellae for High Volume and Fast Turnaround Automated Inline TEM Sample Preparation
E23: Stress Corrosion Cracking in Brass Alloys
E24: Metal Particles Causing Malfunctioning in Electronic Assemblies
E25: Laboratory Activities Relates to Marine Corrosion: Search for Damages Causes
E26: Development of Crack Resistant Carbon-Fiber Reifocred Latex Modified Concrete for Bridge Decks
E27: An Analysis of a "High Cycles Fatigue" Failure Suspension Knee Bearing Used in Special Belgian Heavy Duty Trailers
E28: The Researching and Modeling of Physical-Chemical Properties of Ni-Base Alloys in SHS Conditions
E29: Analysis of Fractured Ti-6Al-7Nb Collars
E2: Study of the Effect of Pinning Particles on Grain Size Distributions Compared with the Smith-Zener Model
E30: Characterization of Alumina Powders during Compaction Using In-Situ Electrical Measurements
E31: Microstructure Study on Tensile Fracture Surface Kenaf Composite with Different Composition
E32: The Simulation of Extrapolated Uniaxial and Multiaxial Creep Experiments
E33: Failure Analysis in the Undergraduate Curriculum at Wright State University
E35: The Effect of Water Immersion on Surface Fracture of Kenaf Composite
E36: Aligned Carbon Nanotubes Grown on 3-Dimension Carbon Foam Structure Using Floating Catalyst Chemical Vapor Deposition.
E37: Porous Sprayer for Degassing of Molten Aluminium
E38: Structural, Mossbauer and Magnetic Properties of Z-Type Ferrite Nanoparticles
E39: Metallurgical Examination of Impulsively Loaded Vessels
E3: Grain Boundary Character Distributions in Isostructural Materials
E40: An In-Situ X-Ray Diffraction Study of Reduction of Nickel Oxide by Hydrogen
E4: Ti-Cu-Ni-Si Phase Diagram in Ti-rich Region
E5: Enthalpies of Formation and Lattice Parameters of Heusler Alloys GaNi2X (X=Hf, V, Nb, Ta, Fe)
E6: Characterization of Stress Hot Spots
E7: Microstructural & Electrochemical Study of 2205 Duplex Stainless Steel Weldments
E8: Effect of Multi-Passes on Microstructure and Electrochemical Behaviour of Weldments
E9: Improving the Confidence Level of TEM-Based Orientation Maps
F10: Optimization of Microstructure and Properties of High Strength Spring Steels
F11: Microstructural Evolution During Coiling Process in Thermomechanically- Processed Low-Silicon Multiphase TRIP-Assisted Steels
F12: Process and Mechanism of Producing Ferro-nickel Nuggets with the Carbon-containing Pellets of Laterite Nickel Ore
F1: The Practice of The Reheating Process and Mathematical Model of Special Materials Slabs
F2: Development of the On-Line Mechanical Property Prediction System for Stainless Steel
F3: Microstructural and Mechanical Properties of Fe-30Mn - 2.3Si - 5Al TWIP Steels
F4: Microstructure and Mechanical Properties of Mn-Based Maraging Steels for Automotive Applications
F5: Study on the Change Law of Microstructure of T91 Steel During Aging at 750℃
F7: Deformation and Recrystallization of a Fe-17% Cr Ferritic Stainless Steel
F8: Formation of Inclusion in Low C-Mn Steel by Ti-Al Complex Deoxidization
F9: Effcet of Hot Rolling Process on Microstructure and Mechanical Properties of Q345B Steel
G10: Mitigation of Corrosion in Cation Exchanger Vessel
G11: Interpretation of the Relaxation Potential Profile of an ac-dc-ac Test
G1: Study of DLC-Ag Films Deposition by Plasma Assisted Technique
G2: Synthesis and Characterization of Plasma Polymerized Thin Films Deposited From Benzene and Hexamethyldisiloxane Using (PECVD) Method
G3: Tribological Properties of MoS2-Ti Coated Steel in Vacuum and Atmospheric Environments
G4: Superficial Modification Related to Optical Intensity of Plasma Species on Peaces of Ti into N2 – Ar – CH4 Gas Mixture
G5: Impact of Ion Implantation on Metal Transfer Under Ambient Conditions
G6: Corrosion Resistance of E-Coat on Cerium Conversion Coated Mg, Al, and Galvanized Steel Couples
G7: Optimization of Plasma Electrolytic Oxidation Coating of AZ91 Mg Alloy by Considering Electrical Parameters
G8: Low-Cost Corrosion Monitoring Sensors Based on Radio Frequency Identification (RFID) Technology
G9: The Protection of Iron Reducing Bacteria (IRB) against the Corrosion of API 5L X52 Linepipe Carbon Steel
H10: Pop-in and Creep Behavior of ZnO Single Crystal during Spherical Nanoindentation
H11: Crystalline Approximants of SiCO: Implications on Structure and Thermochemistry of Ternary Silicon Oxycarbide
H12: Compounds in the System HfO2-SiC-SiO2
H13: Impact of Tungsten on Structure and Thermodynamics of Borosilicate Melts
H14: Improvement of Stress-Rupture Property by Heat Treatment in a Single Crystal Ni-Based Superalloy DD102
H15: Relationship among Microstructure and Microhardness of a Nickel-Based Superalloy Manufactured by Powder Metallurgy
H16: Microstructural Evolution and Its Affect on Mechanical Properties of the Rejuvenated GTD-111 Superalloy by Applying Different HIP Temperatures
H17: Study of the Grain Size Distribution and Mechanical Properties of Ni-Co-Cr-Mo Based Superalloy Deformed at High Temperature
H18: Comparaison of a Gamma Titanium Aluminide Fabricated by LENS, SLM and EBM Techniques
H19: Self-protective Alloy Treatment for Extreme Environments
H1: Polypropylene Tensile Test under Quasi-Static and Dynamic Loading
H20: New Ceramic-matrix Composite for Low Voltage High Energy Plasma Generation. Application to Isopropanol and Ethylene Degradation by a Point-to-Plane Discharge at Atmospheric Pressure
H21: On the Fabrication of Chitin-carbon Nanotube Composites
H22: Modeling of Gas Flow and Turbulence in Atmospheric Pressure PECVD Setup for the Deposition of Amorphous (SiNxH) Coatings in Argon
H23: Processing of Aluminum Wires Treated with Diboride Particles and Its Effect on their Electrical and Mechanical Properties
H24: Modeling of Effective Thermal Conductivities of Fe-Ni Alloy Series as a Function of Temperature in the Liquid Region
H2: Triboluminescent Smart Sensors for Structural Health Monitoring
H3: Influence of Plasma Species on the Cristalline Phases Formation in Surface of Titanium Treated Thermochemically by Plasma N2 - Ar - O2
H4: Effect of Hot Rolling Process on Microstructure and Mechanical Properties of Q345B Steel
H5: Modeling of the Bending Actuation of a Shape Memory Composite
H6: Tribological Properties Modification of Titanium by Plasma Carbonitriding
H7: Synthesis and Electrochemical Performance of SiOC-Carbon Nanotube Composite Coatings
H8: Processing and Characterization of NiTi-MAX Phase Composites Prepared by Spark Plasma Sintering
H9: Application of Ludwigson Function for the Work Hardening Curves Analysis of Composite
J10: Characterization of Residual Coarse Defects in Translucent Alumina Ceramics
J11: A New Method for Producing Titanium Dioxide Pigment – Eliminating Direct CO2 Emissions
J12: A Modified Pidgeon Process for Energy Savings and Low Carbon Emission
J13: Enhancing the Physical and Chemical Properties of Ceramic Teeth by Doping Boric Acid and Calcium Hexaaluminate
J14: Synthesis and Characterization of Porous Titania through Powder Metallurgy
J15: Laser Surface Modification of Lean-Alloyed Austenite Stainless Steel for Corrosion Resistance
J1: A Research the Structure Al-Containing Nanocomplexes Screened Polymeric Cover of Natrium-Carboxymethylcellulose
J2: Evaluate the Microstructure Changes of the Cyclic Sintered Nd-Fe-B Magnets by Transmission Electron Microscopy Analysis
J3: Joining of Large-scaled Silicon Nitride Ceramics
J4: Low-Temperature Synthesis and Characterization of Er and/or Dy Doped LaAlO3 Nanopowders
J5: Electrical Conductivity of Diesel-Biodiesel Blends Evaluated by the Impedance Spectroscopy Technique
J6: Nano-Structures of β-SiC Formed by Rice Husk Pyrolosis
J7: Effect of the Process Temperature on Ti Powder Characteristics Fabricated by Hydride-Dehydride Method from Ti Scraps
J8: Micro Fabrication of Metallic and Oxide Glasses for Terahertz Wave Photonic Crystals
J9: Preparation of Oriented by High Magnetic Field BNBT

Questions about ProgramMaster? Contact programming@programmaster.org