ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Recent Advances in Functional Materials for Printed, Flexible and Wearable Electronics
Presentation Title Room-temperature Aerosol Deposition of PLZT Films on Polymer Substrates
Author(s) U. (Balu) Balachandran
On-Site Speaker (Planned) U. (Balu) Balachandran
Abstract Scope A high-rate, room-temperature aerosol deposition (AD) process is being developed to produce lead lanthanum zirconium titanate (PLZT)-based dielectric films on flexible polymer substrates. The AD process can produce dense films at room temperature; thus making the process amenable for depositing dielectric films on a variety of substrates such as polymer, glass, and metal foils. We demonstrated that a ≈8-μm-thick PLZT film on aluminum-metallized polyimide substrate can be deposited in less than 10 minutes by the AD process. Films deposited by the AD process exhibited dielectric constant of ≈80 at 300 V bias, dielectric loss <2%, and mean breakdown voltage of ≈1000 V. Recently we produced ≈30 cm long and ≈2.5 cm wide PLZT films on aluminum-metallized thin polymer substrates. These PLZT films were wound into capacitors with terminations. The dielectric properties of the long-length PLZT films and the wound capacitors will be presented in this talk.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3-D Printed Polymer-based Gas Sensors
3D Electronics and Sensor Circuits by Combining Conventional PCB Technology with Low Temperature Embedding and Forming
3D Printed Anodes for Al-air Batteries
3D Printing of Metals and Metal Oxides from Solution for Energy and Biomedical Applications
3D Printing of Soft Ionic Actuators/Sensors for Soft Robotic Applications
Additive Manufacturing with Aerosol Jet: From Prototyping to Production
Challenges in Gravure and Direct-write Printing of Nano-colloidal Inks
Delaminated Inkjet Printed Lines with Improved Electro-mechanical Behavior
High Performance Sensors and Antennas by 2D and 3D Printing of Nanoparticles
Highly Stretchable Metallic Interconnects on Polymer Substrates: Architecture and Mechanisms
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/C0529C03377A93C285258193005AA23F?OpenDocument">Integrated and Flexible Integrated and Flexible Biosensors for Point-of-care Diagnostics
[Replication or Save Conflict]
Materials Integration for Flexible Electronics: Cu-interconnects, Supercapacitors
Microheater Array Powder Sintering: A New Process for Printed Electronics
Nondestructive Examination Study in P(VDF-TrFE) Filter System and PM2.5 Spatial Resolution Technology by Using Synchrotron Transmission X-ray Microscopy
Printable Functional Materials for Smart Fabrics
Recent Advancement on Printed, Stretchable, and Wearable Electronics in 2D Materials
Room-temperature Aerosol Deposition of PLZT Films on Polymer Substrates
Single-crystalline-like Semiconductor Films on Flexible Substrates: A Route towards Roll-to-roll Manufacturing of High-performance Electronic Devices
Stretchable Wirings Prepared with PU and Silver Flakes
Structural-resolved Study Of Piezoelectric Properties Of P(VDF-TrFE) Films
Textile-enabled Wearable Energy Storage Devices (invited)
Transparent Field Effect Biosensors Printed on Highly Curved Surfaces
Ultrafast Pulsed Light Sintering of Thermoelectric Nanoparticles

Questions about ProgramMaster? Contact programming@programmaster.org