ProgramMaster Logo
Conference Tools for 2016 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2016 TMS Annual Meeting & Exhibition
Symposium Materials in Clean Power Systems IX: Durability of Materials
Presentation Title Cyclic Behavior and Fatigue Properties for Haynes 282
Author(s) Kyle A. Rozman, John S. Sears, Jeffrey A. Hawk, Paul D. Jablonski
On-Site Speaker (Planned) Kyle A. Rozman
Abstract Scope Experience with gamma prime strengthened nickel-base alloys for possible use is A-USC energy systems has shown that commercial, “off-the-shelf” nickel superalloys like Haynes 282 possess the requisite tensile strength and creep capability to meet service requirements. However, the fatigue properties and high temperature crack growth behavior is less well known. General behavior of Haynes 282 under high- and low-cycle fatigue loading at 1400F will be discussed. In addition the fatigue crack growth rate at several temperatures within the region of interest will also be presented. Deformation due to fatigue loading will be discussed for selected testing conditions. With the overall results compared to other nickel superalloys.
Proceedings Inclusion? Planned: A print-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Characterization of Titanium Thin-Film Liquid/Gas Diffusion Layer in Clean and Renewable Power Systems
Computational Modeling of Metal Oxidation
Corrosion Behaviour of 9-12Cr Ferritic Steels and 18-25Cr Austenitic Steels in Supercritical CO2
Corrosion of Energy System Materials in Supercritical Carbon Dioxide (sCO2)
Corrosion of Nickel-base Alloys by Supercritical CO2
Corrosion of Supercritical CO2 Turbomachinary Components
Cyclic Behavior and Fatigue Properties for Haynes 282
Development of Creep Resistant High Cr containing FeCrAl Ferritic Alloys for Fossil Energy Applications
Development of HfB2-ZrB2 Based Ceramics as High Temperature Electrode Materials for MHD Direct Power Extraction System
Effect of Temperature and Pressure on Supercritical CO2 Compatibility of Structural Alloys
Electrodeposition of MCrAlY and Pt-Modified MCrAlY Coatings for Gas-Turbine Engine Applications
Evaluation of the Creep-Rupture Behavior of Haynes Alloy 282 for Advanced Ultrasupercritical Boiler Service
Heat Resistant Alloy Development for Fossil Energy Power Generation
High-Temperature Corrosion of Diffusion Bonded Haynes 230 in Supercritical CO2 Cycle Conditions
High Pressure Steam Oxidation of Boiler and Turbine Alloys
High Temperature Corrosion in Molten Salts & Molten Salts Technology: Past, Present and Future
High Temperature Oxidation and Mechanical Properties of Novel Al-containing Fe-based ODS Alloys
Long-term Microstructural Stability in Haynes 282 after High Temperature Exposure
M-1: Effect of High Temperature Cyclic Oxidation on the Deformation of ODS and Cast FeCrAlY Alloys
M-2: Effect of Mechanical Loading on Galvanic Corrosion Using Electrochemical Characterization Techniques and Depth Profiling
M-3: Electrodeposition of Amorphous/Nanocrystalline Ni–Mo Alloy for Hydrogen Evolution Reaction
M-4: Phyllanthus Muellerianus and Triethanolamine Synergistic Effects on Steel-reinforced Concrete in 0.5 M H2SO4: Implication for Clean Corrosion-protection of Wind-energy Structures in Industrial Environment
Materials Issues for Supercritical CO2 above 700C
Mechanical Characterization of Solid Acid Materials for Intermediate Temperature Fuel Cells
Precipitation Dynamics and the Role of Microstructural Changes in the Development of Alumina-Forming Austenitic Stainless Steels
Weldability of Gradient Tubes for High Temperature Application

Questions about ProgramMaster? Contact programming@programmaster.org