ProgramMaster Logo
Conference Tools for MS&T23: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T23: Materials Science & Technology
Symposium Additive Manufacturing of Polymeric-based Materials: Challenges and Potentials
Presentation Title Material Extrusion Additive Manufacturing of Thermoset-based Short Fiber Composites
Author(s) Brett Compton
On-Site Speaker (Planned) Brett Compton
Abstract Scope This talk will discuss the challenges and opportunities associated with material extrusion additive manufacturing (AM) of short fiber composites, with an emphasis on thermoset-based systems. The talk will begin with a brief review the origin and early work in AM of thermosets and short fiber composites then proceed into current research that investigates the factors that control the fiber length distribution (FLD) in printed short-fiber composites and how FLD influences printability and mechanical properties. The talk will conclude with an introduction of novel printing approaches that enable higher fiber loading, unique material architecture, and greater control over fiber orientation.

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3D Printing of Silicone-Based Flexible Materials with Embedded Sensors for Soft Robotic Actuator Applications
A-10: Synthesis and Characterization of Electroplated Alloys on 3D Printed Preforms
Characterization of Processing and Performance Properties of Ammonium Perchlorate Composite Propellant for Use in an Additive-manufacture System
Enhancing Interphase Strength of Glass Fiber Polymer Matrix Composites - A Molecular Dynamics Study
Extrusion of Compounded rPET with Graphite Powder into Filament for Material Extrusion (MEX) Additive Manufacturing Technology
Investigating Antimicrobial Efficacy of Printed PEEK Coated with AgNPs
Manufacturing of High-Quality Polymer Powders for Selective Laser Sintering Using Thermally Induced Phase Separation and In-situ Sol Gel Process
Material Extrusion Additive Manufacturing of Thermoset-based Short Fiber Composites
Photopolymer-metal Composites Based on Metal Foil Deposition on Additive Manufactured Substrates
Polymer Additive Manufacturing of Low-cost Agile Tooling for Sheet Metal Forming
Quick Cure Silicones for Nontraditional Architectures

Questions about ProgramMaster? Contact programming@programmaster.org