|About this Abstract
||2017 TMS Annual Meeting & Exhibition
||Energy Materials 2017: Materials for Energy Conversion with Emphasis on SOFC
||Synthesis and Characterisation of Perovskite Type Anode Material and Its Tape Casting for IT-SOFC Application
||Subhajit Pan, Ramesh Chandra Biswal, Koushik Biswas
|On-Site Speaker (Planned)
Solid oxide fuel cell (SOFC) is very popular nowadays because of its high efficiency, fuel flexibility, long-lasting and eco-friendly energy conversion device. Till date, yttria stabilized zirconia (YSZ) system has been dominated in the SOFC world in which Ni/YSZ cermet is commonly used as anode material. But Ni/YSZ cermet anodes shows, carbon deposition and rapid performance degradation when hydrocarbon fuels are used. Alternative perovskite systems La1-xSrxCr1-yMyO3-δ (M: Mn, Fe, and V) have attracted much attention as anode material due to their high-temperature stability, low carbon deposition, and high catalytic activity. In the present work, La0.75Sr0.25Cr0.5Mn0.5O3-δ (LSCM) is synthesized by solid state synthesis method. Compatibility of the anode material with perovskite electrolyte (La1-xSrxGa1-yMgyO3-δ ) is evaluated by XRD analysis, SEM, impedance spectroscopy and 4-probe method. Using an organic solvent-based formulation, flexible and homogeneous LSCM tapes were cast for potential use as an anode in SOFC.
||Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)