ProgramMaster Logo
Conference Tools for 13th International Conference on Aluminum Alloys (ICAA13)
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Propose A Proceedings
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 13th International Conference on Aluminum Alloys (ICAA13)
Symposium 13th International Conference on Aluminum Alloys (ICAA13)
Presentation Title Fatigue Resistance of Al-Cu-Li and Comparison with 7xxx Aerospace Alloys
Author(s) Armelle Daniélou, Jean-Christophe Ehrström, Jean-Patrick Ronxin
On-Site Speaker (Planned) Armelle Daniélou
Abstract Scope Al-Cu-Li alloys are of great interest for aerospace applications due to their good mechanical property balance, excellent corrosion resistance and reduced density. These alloys exhibit an increased resistance to fatigue compared to incumbent 7xxx alloys. We have studied the fatigue resistance of alloys 2050 (AlCuLi alloy belonging to the AIRWARETM family) and 7050. Crack initiation and propagation have been characterized in FEG-SEM and optical observations on open hole fatigue specimens. Initiation on different constituent particles or on slip bands was observed, depending on the stress level. The relative part of initiation versus propagation in the fatigue life has been analyzed through a model based on intermetallic particle distribution and Paris’s law. The Paris law was obtained from crack growth rate measurements of long and microscopic fatigue cracks, as well as from striation lengths. The consequences for alloy and process selection will be discussed.
Proceedings Inclusion? Definite: A CD-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3-Dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP
6xxx Series Alloy Design Considerations Relating to Recycling
A 3-D Quantitative Crystallographic Model for Short Fatigue Crack Propagation through Grain Boundaries in High Strength Al Alloys
A Brief Overview of ICME: Current State and Path Forward
A Microstructure Based Multi-Site Crack Growth Model
A New Crystal Plasticity Based Constitutive Model Incorporating Backstress for FCC Polycrystals
A Study of Stress Effects on Βeta-Phase Precipitation in Al-Mg Alloys Using In-Situ TEM
A Study of the Influence of Plastic Pre Strain in Different Directions before Aging of Extruded and Hydro Formed Material on the Mechanical Properties of AA6063
A Study of the Influence of Strain Hardening and Precipitation Hardening Sequence on Mechanical Properties of AlMgSi Conductor Alloys
A Study of the Microstructure, Crystallographic Texture, and Recrystallization in AA4006 Alloy Strips Produced by Twin Roll Caster and Direct Chill Processes
A System for Continuous Extrusion Using High Pressure Molten Metal
A Through Process Model for AA3xxx Aluminum Alloys
Ab Initio Simulations of Vacancy-Solute Clusters in Al-Mg-Si and Al-Zn-Mg Alloys
Aberration-Corrected STEM Study of Precipitates in an Al-Mg-Si-Ge-Cu Alloy
Abnormal Recrystallization Behavior of High Purity Aluminum Foil
About the Challenge in Determing the Cyclic Material Behaviour of Aluminium Alloys for the Numerical Fatigue Analyses
Accelerated Post-Weld Natural Ageing in Ultrasonic Welding Aluminium 6111-T4 Automotive Sheet
Advanced Class of FML on the Base Al-Li Alloy 1441 with Lower Density
Advances in Aluminium ICME
Advances in Aluminum Mold Block for Plastic Injection Molding Operations
Ageing Hardening and Precipitation of the 7A60 Alloys during Cooling Aging
Aging Behavior of Flexcast® Al-Mg Alloys with Sc and Zr Additions
Al-Li-Cu-Mg-(Ag) Products for Lower Wing Skin Applications
ALUHAB the Superior Aluminium Foam
Aluminum is Aluminum, Right?
Aluminum Monolithic Alloy and Multi-Alloy Cast Using Planar Solidification Approach
Aluminum Recovery and Recycling for the 21st Century: Challenges and Opportunities
An Al–Mg–Si-Cu Alloy with Improved Formability Used for Automotive Body Panels
Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent
Analysis of Dimensional Distortion in 5XXX Alloys during Annealing for Flat Panel Display Applications
Analytical Precipitate Model for AA3XXX Alloy
Anisotropy and Forming Limit Diagram Comparison of DC and CC 5xxx O Temper Aluminum Alloy Sheets
Application of an Isothermal Calorimetry Technique to Determine TTP Diagrams for AA6xxx Alloys
Application of Atom Probe Tomography for New Insights into Advanced Aluminium Alloy Technology
Application of Computational Thermodynamics and Precipitation Kinetics to Light Weight Al Alloy Design
Application of Microelectrochemical Methods for Understanding Localized Corrosion Behavior of Aluminum Alloys
Assessment of the Al–Ni–Mn–Fe–Si–Zr Phase Diagram for New-Generation Heat-Resistant Casting Aluminum Alloys
Atom-Probe Tomography and the Science of a New Class of Al-Sc Based Alloys
Behaviors of 7055 Aluminum Alloy in Retrogression and Re-Aging Treatment
Buckling of Aluminium Sheet Components
Capillary Tube Fabrication of A3003 Alloy for Air Condition
Cathodic Dissolution of Pure Aluminum, Aluminum Alloy AA6061 and Aluminum Particle Based Coating Studied by AESEC Method
Changes in Microstructure During High Strain Rate Superplastic Deformation of an Al-Zn-Mg-Cu-Zr Alloy Containing Sc
Characterization of Initial Ingot Microstructure
Characterization of Metal Flow in Metals Processing by a Combined Approach using Advanced Experimental Grid Pattern Techniques Coupled with FE-analysis
Characterization of Pre-Aged AA6061-T6 Sheet Material for Aerospace Applications
Characterization of the Artificial Aging Behavior and Formability of a High Strength EN AW-6016 at Different Heat Treatment Conditions Used for Automotive Applications
Cold Spray Process for the Repair and Manufacture of Aluminium Alloy Parts
Combined Effects of Low Temperature Aging and Sc Addition upon the Peak Aged Microstructure and Tensile Properties of Aluminium Alloys AA7010 and AA7017
Comparison of Corrosion Performance and Mechanisms of Al-Cu Alloys with and without Li Addition
Comparison of Localized Deformation in Crystal Plasticity Based Finite Element Simulations between Experimentally Measured and Statistically Generated Three-Dimensional Microstructures for the Aluminum Alloy 5754
Comparison of the Influence of Si and Fe in High Purity Aluminum and in Commercial Purity Aluminum
Compression Properties of Fly Ash/Al Syntactic Foams
Continuous Heating Dissolution Diagrams of Aluminum Alloys
Controlled Quenching of Aluminum Alloys in Flexible Spray Fields
Correlation of Fracture Behavior with Microstructure in Friction Stir Welded, and Spin-formed Al-Li 2195 Domes
Corrosion and Potentiostatic Polarization of an Al-Cu-Li Alloy under Tensile Stress
Corrosion Characteristics of an Al-1.78%Si-13.29%Mg Alloy in Chloride Solutions
Corrosion Characteristics of Sintered 7075 Aluminum Alloy under SSRT Test
Corrosion Fatigue Mechanism on Hot-Forged AA6082 Aluminum Alloy
Corrosion Inhibition of Stress Corrosion Cracking and Localized Corrosion of Turbo-Expander Materials
Corrosion Performance of New Generation Aluminum-Lithium Alloys for Aerospace Applications
Corrosion Protection of Light Alloys using Low Pressure Cold Spray
Corrosion Resistance Improvement by Alodine EC2 Coating on Aluminum Alloys
Crystal Plasticity Analysis of Constitutive Behavior of 5754 Aluminum Sheet
Crystal Plasticity Calculations of Mechanical Anisotropy of Aluminium Compared to Experiments and to Yield Criterion Fittings
Crystal Plasticity Simulation of Deformation Behavior in Polycrystalline Aluminum
Crystallographic Orientation Dependence of Corrosion Behavior of 5N Purity Aluminum in Different Concentrations of HCl Aqueous Solutions
Damage Tolerance Applied to the Design of Mid-Size Aircraft
Defining the Property Space and the Role of Basic Microstructure and Chemistry on Corrosion
Defining the Property Space and the Role of Basic Microstructure and Chemistry on Corrosion
Detection of Corrosion-Related Defects and Copper Enrichment in Aluminum and Aluminium Alloy Using Positron Annihilation Spectroscopy
Develop ICME Tool for High Ductility Cast Aluminum Alloys for Automotive Body Applications
Development of Age-Hardening Technology for Ultrafine-Grained Al-Li-Cu Alloys Fabricated by High-Pressure Torsion
Development of High Toughness Sheet and Extruded Products for Airplane Fuselage Structures
Development of Large-size Ultrasonic Sonotrodes for Cavitation Treatment of Molten Metals
Development of Multilayered Composite of 6061/2014 through ARB Process
Diffraction-Amalgamated Grain-Boundary Tracking (DAGT) Technique and Its Application to an Aluminium Alloy
Distinguishing Dynamic Recrystallization (DRX) in Aluminum and Single Phase Alloys
Dynamic Room Temperature Precipitation during Cyclic Deformation of an Al-Zn-Mg Alloy
Effect of Additional Element on Hybrid Laser Weldability in Al-Mn Alloys
Effect of Additional Elements of Al-Si Filler Alloy on Flowability and Clearance Fillability during Brazing
Effect of Aging Tempers on Electrochemical and Stress Corrosion Cracking Behavior of a 7017 Al-Zn-Mg Alloy
Effect of Annealing Condition on Earing and Texture Formation in Cold Rolled AA5182 Aluminum Alloy
Effect of Coarse Particles on Work Hardening in the Al-Mn Alloy
Effect of Composition and Pre-ageing on the Natural Ageing and Paint-baking Behaviour of Al-Mg-Si Alloys
Effect of Exploitation Overhead Power Lines on the Evolution of Mechanical Properties of Wires
Effect of Extensive Rolling on Mechanical Properties of an A-Mg-Sc Alloy
Effect of Fatigue and Damage Tolerance Material Properties on the Efficiency of Aircraft Structures
Effect of Impact Compression on the Age-Hardening of Rapidly Solidified Al-Zn-Mg Base Alloys
Effect of Low Cu Amounts and Pre-Deformation on the Precipitation in Al-Mg-Si Alloys
Effect of Nickel Variation and Thermomechanical Treatment on Microstructure and Properties in Aluminum Alloy Fin Stock for Heat Exchanger
Effect of Oxide Level on Pore Formation in A356 Alloy by X-Ray Imaging and Direcctional Solidification Technology
Effect of Process Parameters on Microstructure Stability of FSW Butt Joints after Thermal Treatments
Effect of Quenching Wait Time on Microstructure and Mechanical Properties of As-extruded AA6063 Alloy
Effect of Si Additions on Solution Hardening of Al-Mn Alloys
Effect of the Process of Hot Deformation of Aluminum Alloy with the Addition of Zirconium on the Formation of its Electrical and Mechanical Properties during the Process of Heat-treatment
Effect of Three-Dimensional Grain Boundary Structure, Crystallography and Chemistry on Sensitization in Al-Mg Alloys
Effects of Deformation Texture Intensities and Precipitates on the Anisotropy of Mechanical Properties of Al-Li Alloy 2099 T83 Extrusions
Effects of Electroslag Refining on Removal of Iron Impurity and Alumina Inclusions from Aluminum
Effects of Microalloying Elements (Cu, Ag) on Nanocluster Formation and Age-Hardening Behavior in Al-Mg-Si Alloys
Effects of Plate Thickness and Projection Shape on the Microstructure and Strength of High-Speed Solid-State Joined 2024 Alloy Studs and 5052 Alloy Plates
Effects of Pre-Aging Condition on Multi-Step Aging Behavior in Al-Mg-Si Alloy
Electromagnetic Hemming for Aluminum Alloy Sheets
Emerging Development in Al-Alloy Recycling For Nontraditional Aluminum Metal Matrix Composites Processing
Enhanced Performance of Layered/Laminated Aluminum Systems
Evaluation of the Ring Compression Test for the Parameter Determination of Extended Friction Models
Evolution in Microchemistry and its Effect on Deformation and Annealing Behavior of an AlMnFeSi-Alloy
Evolution of Aluminum Can Stock Materials (1961-2011)
Evolution of Fragmented Fe-intermetallic Compounds in the Semi-Solid State of Al-Mg-Si-Fe Alloys by Deformation Semi-Solid Forming Process
Examination of Buckling Behavior of Thin-Walled Al-Mg-Si Alloy Extrusions
Examining the Mechanisms of Dynamic Recrystallization (DRX) in Two-Phase Al Alloys
Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications
Experience of Developing and Introduction in Industry New Primary and Secondary Al-Alloys with Given Properties for Shape Casting
Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Similar- and Dissimilar-Metal Plates
Fabrication of Aluminum Alloy-Based Diamond Grinding Wheel by the Centrifugal Mixed-Powder Method for Novel Machining Technology of CFRP
Fabrication of Nanostructural Aluminum Alloy Powder with Ball Milling Method
Fatigue and Creep Properties of Al-Si Brazing Filler Metals
Fatigue Behavior and Damage Monitoring of Welded Hybrid Joints
Fatigue Behavior in Rheocast Aluminum 357 Suspension Arms Using the SEED Process
Fatigue Crack Growth Behavior of 2099-T83 Extrusions in Two Different Environments
Fatigue Life of Ablation Cast 6061-T6 Components
Fatigue Resistance of Al-Cu-Li and Comparison with 7xxx Aerospace Alloys
Finite Element Peen Forming Simulation
Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness
Formability of Al-Mg (5052) Sheet with Ball-Wire Method
Formation of P ({011}<566>) and {113}<110> Textures by Precipitation Pinning in Continuous Cast Al Alloys during Annealing
Fracture Mechanisms in Al-Cu-Li Alloys
From Forming Limit Curves to a Forming Limit Surface
Functional Gradient Products Enabled by Planar Solidification Technologies
Galvanic Corrosion of Al-Li Alloys Coupled to CFRP Composite
Grain Refining Potency of LaB6 on Aluminum Alloy
Hardening Potential of an Al-Cu-Li Friction Stir Weld
Hardening Response to Rapid Aging Processes and Precipitation in Al-7%Si-0.3%Mg Alloy
Heat Teatment of Aluminum Cast with Stir Zone Surface Layer Type Produced by FSP Method
Hf-Containing Precipitates in Al-Si-Mg-Hf Alloy during Heat Treatments at 400oC-560oC
High-Pressure Torsion for Microstructure Control in Binary Al-Fe Alloys with Different States of Fe-Containing Phases
High Dense RF-DC Plasma Nitriding of Al-Cu Alloys
High Resolution Characterization of the Precipitation Behavior of an Al-Zn-Mg-Cu Alloy
High Resolution Microscopy of Al 2199 Alloy
High Temperature Deformation Behavior of a 6N01 Aluminum Alloy Extrusion with a Seam Weld
Hot Deformation Behavior and Microstructural Evolution of Homogenized 7150 Aluminum Alloys Micro-Alloyed with Zr and V
Hot Extrusion of Aluminum Chips
Hydrogen Depth-Profiling and Desorption Kinetics in Rapidly Solidified Al-Fe Alloys
Identification and Distribution of Fe Intermetallic Phases in AA5657 DC Cast Ingots
Impact Toughness Enhancement of Melt Treated Al-Si-Mg Cast Alloy
In-Situ Tensile Stress Determination of an AA7xxx Alloy
In situ Synthesis of Al/TiC Composites by Combustion Reaction in an Al Melt
Increased Production and Quality with Reduced Operating Costs and Emissions in Aluminum Melting Using High Temperature Oxygen Analyzers
Industrial Development of Al-Cu-Mg-Li-Ag Alloy V-1469
Influence of Chemical Composition on Aging Property of 7204 Aluminum Alloy
Influence of Erosion Phenomenon on Flow Behavior of Liquid Al-Si Filler Between Brazed Components
Influence of Forming Conditions to Springback in V-bending Process Using Servo Press
Influence of Magnesium Content and Heat Treatment on the Intergranular Corrosion OF 5083 Alloy H321 and H116 Temper
Influence of Mg and Si on Cluster Formation in Al-Mg-Si Alloys Studied by Positron Annihilation Lifetime Spectroscopy
Influence of Microstructure on the Fretting Resistance of Al-Cu-Li Alloys
Influence of Process Fluctuations on Weld Seam Properties in Aluminum Alloy Extrusion
Influence of Strain Hardening on Rheological Properties of AlMgSi Wires
Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys
Influences on Arc Stability in Welding of Aluminum Pin-Structures
Initial Studies of 6082 Aluminium Thin Films
Interface Structure and Bonding in Rapid Dissimilar FSSW of Al to Steel Automotive Sheet
Interfacial Reaction during Dissimilar Joining of Aluminum Alloy to Magnesium and Titanium Alloys
Intermetallic Phase Formation in TP1 and DC Cast Billet of an AA 6063 Al Alloy
Investigation of Acoustic Streaming in Aluminum Melts Exposed to High-Intensity Ultrasonic Irradiation
Investigation of Superplasticity in Aluminum Alloy 5083
Investigation on the Evolution of the Microstructure during Homogenization in Thin Al Sheets
Investigations on the Precipitation in Al-Mg-Si Monocrystalline Model Alloy by Small Angle Neutron Scattering
It’s Not Your Father’s Cast House Any More
Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method
Lighter and Stiffer Materials for Use in Space Vehicles
Limitations of M-K Based Forming Limit Diagram Predictions
Low Work Hardening And Its Mitigation In Ultra-Fine Grained Al Alloys
Magnetism, Structural and Mechanical Behavior of Transitional Bulk Nanostructured Al Alloy
Manufacturing Challenges for Aluminum Sheet in the Automotive Industry
Manufacturing Technology of Aluminium Alloy Products Intended for Use in Transport by Land, Sea and Air
Material and Structural Simulation Methodology Advancements for Fatigue and Damage Tolerant Critical Aircraft Structures – an Aluminum Supplier Perspective
Material Testing and Modeling of Aluminum Alloy Sheet in Support of Forming Simulations
Measurements of Adhesion and Adhesion Degradation for Organic Coatings on Metals
Mechanical Characterization of Bimodal Grain Size Aluminum 5083 under Various Test Conditions
Mechanical Properties of Al-Mg-Sc-Zr Alloys at Cryogenic and Ambient Temperatures
Mechanical Properties of Heat Exchanger Tube Materials at Elevated Temperatures
Mechanical Properties of Multilayer 1100/7075 Aluminum Sheet Produced by Hot ARB
Meeting Vehicle Lightweighting Challenges with Aluminum
Melt Conditioned Casting of Aluminum Alloys
Metalworking of a Spherical Particle Reinforced Aluminum Composite
Microcellular Aluminium by Replication
Microhardness Profile and Microstructure Characterization in Friction Stir Processing Zone of the Aged and Solid Solution Treated 7075 Aluminum Alloys
Microstructural and Mechanical Evolutions during the Forging Step of the COBAPRESS, a Casting/Forging Process
Microstructural Characteristics of High Rate Plastic Deformation in Al Trimodal Metal Matrix Composites
Microstructural Characterization of Flexcast® Al-Mg Alloys with Sc and Zr Additions
Microstructural Evolution in Intensive Melt Sheared Direct-Chill Cast Aluminium Alloys
Microstructural Modification Mechanisms and Integrated Thermal Management for Local Microstructure Control in Aluminum Castings
Microstructure and Mechanical Properties of AA2195 DC Cast Ingot Plates
Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr Alloy Subjected to Extensive Cold Rolling
Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds Using AA6061-T6 and AZ31 Plates
Microstructure and Mechanical Properties of Friction Stir Welded Aluminum Alloy/Stainless Steel Lap Joints
Microstructure and Texture Evolution of Al-Zn-Mg Aluminum Alloy during Cold Rolled to High Strain and Followed Annealing
Microstructure Development and Control in Hypereutectic Cast Al-Si Alloy Evaluated by Metallurgical Analysis and Neutron Diffraction
Microstructure Evolution and Tensile Property of Al-4.35Cu-1.53Mg Alloy during Creep Age Forming Process
Microstructure Evolution of AA5083 during Friction Stir Welding
Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster
Microstructures and Mechanical Properties of Al-Al2O3 Composites Processed by Disk-HPT and Ring-HPT
Microstructure, Mechanical and Electrical Properties Evolution during Cold Rolling of Different 1xxxx Series Aluminium after Continuous Casting
Modeling of Texture Evolution during Thermomechanical Processing in AA6xxx
Modeling of Transients as a Response to Changes in Strain-Path of Commercially Pure Aluminium
Modeling of Work-Hardening in an Age-hardenable AA7108 Aluminum Alloy
Modeling the Precipitation Behavior of Semi-Stoichiometric Dispersoids in 3xxxx Aluminium Alloys
Modeling the Recrystallization Textures in Al Alloys after Various Rolling Reductions
Modelling Grain Deformation during Extrusion of AA3003 using the Finite Element Method
Modelling the Effect of Room Temperature Storage and Deformation on the Age-Hardening Behavior of Al-Mg-Si Alloys
Monitoring Precipitation during Rapid Quenching of Aluminium Alloys by Calorimetric Reheating Experiments
Multiscale Characterization and Mechanical Modelling of an Al-Zn-Mg Electron Beam Weld
Muon Spin Relaxation and Positron Annihilation Spectroscopy Studies of Natural Aging in Al-Mg-Si Alloys
Nano-scale Characterization of Al-Mg Nanocrystalline Alloys
Nanocluster Formation Behavior in Al-Zn-Mg Alloys with Microalloying Elements and Improved Mechanical Properties
Nanoscale Precipitation-Strengthened Al-Sc-Ta Alloys
Nanostructured Materials: From the Nanoscale to the Microscale
New Al-Mg-Si Alloy V-1341 Alloyed with Calcium for the Aviation and Automotive Industries
New Analysis of Solute Drag in AA5754 by Precise Determination of Point Defect Generation and the Orowan Relation
Novel Cold Spray Nanostructured Aluminum
Numerical Analysis of Surface Roughening and Necking in Aluminum Alloy Tubes Under Internal Pressure
Numerical Simulation of Flat Rolling Practices
On the Effect of Pre-Strain and Strain-Path Changes on Void Growth and Linkage in AA5052 Model Materials
Orientation Dependent Subgrain Growth During Isothermal Annealing of High-Purity Aluminum
Orientation Effects in the Particle Stimulated Nucleation of Recrystallization
Orientation Relationship of Dispersoids Precipitated in an AA3xxx Alloying during Annealing at Low Temperatures
Origin of Ductile Fracture in Aluminum Alloys
Overageing Kinetics in Fibrous vs Recrystallised Al-Mg-Si-Cu Alloys
P01 - Change of Dislocation Density in Ultrafine-Grained Aluminum during Tensile Deformation
P03 - Electromagnetic Continuous Casting of Free-Shape Aluminum Billet
P04 - Microstructure and Mechanical Properties of Al-Mn/Al-Si Hybrid Aluminum Alloys Prepared by Duo-Casting
P05 - Influences of Pouring Temperature and Cooling Rate on Microstructure and Microhardness of Casting ADC12 Alloy
P06 - Effect of Mn on the Interaction between Die Casting Steel and Al Alloy
P07 - Limitation of Shrinkage Porosity in Aluminum Rotor Die Casting
P08 - The Effect of Alloying Elements on Thermal Conductivity and Casting Characteristic in High Pressure Die Casting of Aluminum Alloy
P09 - Aluminum Clad Ingot Casting by Electromagnetic Stirring Technique
P10 - An Overview of Molten Aluminium Steam Explosions
P11 - Organic Coatings to Prevent Molten Aluminum Water Explosions in Aluminum Cast Houses
P12 - Experimental Study of Direct Squeeze Casting of Al-Si Alloy
P13 - An Investigation on the Refinement Effect of Ti-6Al-4V on Fe-rich Hypo-eutectic Al-Si Alloys
P14 - The Relationship between Dendrite Arm Spacing and Cooling Rate of Al-Si Casting Alloys in High Pressure Die Casting
P15 - Development and Characterization of an Al –Grid Metasurface on Conformal Geometry
P16 - The Effect of Chemical Composition and Structure on the Corrosion Resistance of Plated Aluminium Alloy Strips
P17 - Research on the Fatigue and Crack Initiation Behavior of Alloy 7449
P18 - Effects of Long Term Thermal Exposures on Degradation of Mechanical Properties in 5456-H116 and 5083-H116
P20 - Microstructure and Mechanical Properties of an Electron Beam Welds in a Spray-Deposited Al-Zn-Mg-Cu Alloy
P21 - Characterization of Damage Mechanisms during Bending of 6xxx Aluminium Automotive Sheets
P22 - Heat Treatment of Welded Joints Made on 7020 Alloy with the AlMg5 Alloy
P23 - The Behavior of the Cordon of Weld of an Alloy of Aluminum 7075 T6 Welded by the TIG Process
P24 - Age-hardening Behavior of MgB2 Particle Dispersed Al Alloy Composite Materials
P25 - Production of the Al3Ti Foam by Microwave Heating
P26 - Effects of Microalloying with Sn on the Precipitation Process of Al-3.5Cu-0.4Mg(wt%) Alloy
P27 - Precipitation Processes in Al-Cu-Mg-(Si) Alloys in the α+S+T Phase Field
P28 - Effect of Fe Content on the Transformation of Ferrous Phases in 6XXX Alloys during Homogenizing Annealing
P29 - Evolution of Nanometer Precipitates in Al-Zn-Mg-Cu Alloy Subjected to Overaging Treatment and Warm Deformation
P30 - Precipitation Morphology and Tensile Properties of Al-0.62Mg-0.32Si Alloy Aged at Low Temperature
P31 - Microstructural Change and Mechanical Properties with Isochronal Aging in Al-Ni-Gd Metallic Glasses
P32 - Age-Hardening Behavior of Al-Mg2Si Alloys with Different Mn or Fe Contents
P33 - The Features of Phase Composition and Microstructure of Eutectic Piston Silumins AlSi12CuMgNi and AlSi12Cu2MgNi
P34 - TEM Observation of Precipitates in Ag-Added Al-Mg-Si Alloys
P35 - Effect of Ag and Cu Contents on the Age Hardening Behavior of Al-Zn-Mg Alloys
P36 - Effect of Cu or Ag Addition on Tensile Deformation in Al-Zn-Mg Alloys
P37 - HRTEM Observation of Precipitation in Cu and Ag Added Al-Mg-Si Alloys
P38 - Effect of Cu or Ag Addition on Two-step Aging Al-Mg-Si Alloy
P39 - Effect of Cold-Rolling on Age Hardening in Excess Mg-type Al-Mg-Si Alloys Including Some Minor Elements
P40 - Effect of Transition Metals on The Age-hardening Behavior of Al-Mg-Ge Alloys
P41 - Influence of 0.4Fe and 0.25%Si on the Formation of the GPB Zones in the Al-3%Cu-1%Mg Alloy
P42 - TEM Observation of Precipitates in Al-Mg-Ge Alloys with Different Mg2Ge Contents
P43 - Influence of Silicon Addition on Precipitation Behavior in an Al-Cu-Mg Alloy
P44 - X-ray Diffraction Study on Lattice Constant of Supersaturated Solid Solution for Al Based Binary Alloys and Selected Al-Zn-Mg-Cu Alloys
P45 - Influence of Ti, B and Sr on the Tribological Properties of Forged A356 Alloy
P46 - A Conventional Thermo-Mechanical Process for Improving the Mechanical Properties of Al-Cu-Mg Alloy
P47 - The Phase Morphological Change of 7000 Series Aluminium Alloy Added Ni
P48 - Effect of Alloy Elements on Microstructures and Mechanical Properties in Al-Mg-Si Alloy
P49 - Deformation Behavior of Semi-Solid A356 Alloys during Compression at Elevated Temperature and its Thixo-Extrusion
P52 - Dispersion Hardening Effect of Dispersoids in 3xxx Al Alloys With Varying Manganese and Silicon Contents
P53 - Effect of Hot Extrusion Conditions on the Microstructure of AA3003
P54 - Effect of Iron and Silicon on Strength and Electrical Resistivity of Al-Zr Wire Alloys
P55 - Effect of Prior State on the Microstructural Evolution in a Al-Cu-Mg-Ag Alloy during ECAP at 250°C
P56 - Influence of the Chemical Composition on the Structure and Properties of Lead-Free Machinable AA6023 (Al-Mg-Si-Sn-Bi) Alloy
P57 - Effect of Thermomechanical Treatment on Sag Resistance of Roll-Bonded High Strength Aluminum Clad Sheets
P58 - Homogenisation of 6xxx Alloy Ingots with an Addition of Vanadium
P59 - An Effect of Thermomechanical Treatment on Properties and Structure of Al-Cu- Li-Zn Alloy Plates
P60 - Effect of Subsequent Annealing on the Microstructure Stability of Friction Stir Processed AA5052 Alloy
P61 - The Mould Characteristics of Ngwo Foundry Sand
P62 - Effect of Starch on the Mould Characteristics of Ngwo Foundry Sand
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/54C880C7171A0CF28525792200293BC2?OpenDocument">P63 - Effect of QuenchinP63 - Effect of Quenching Condition on Aging of Dilute Al-Ag Alloy
[Replication or Save Conflict]
[Replication or Save Conflict]
[Replication or Save Conflict]
P65: Testing the Corrosion Behavior of Plated Aluminum Strips for Heat Exchangers Operating in the Automotive Industry
Path Independent Polar Effective Plastic Strain (PEPS) Diagram for Sheet Forming
Peripheral Friction Stir Processing for Recycling Aluminium Scrap
Phase Coarsening in Al-Li Binary Alloys
Plenary 1
Plenary 2
Plenary 3
Plenary 4
Plenary 5
Polycrystal-Plasticity Simulation of Roping in AA6xxx Automotive Sheet Alloys
Powder Metallurgy of High Strength Al84Gd6Ni7Co3 Gas-atomized Powder
Precipitation-Strengthened Al-Zr-Sc-Er Alloys with High Creep- and Coarsening-Resistance
Precipitation and Transformation of Metastable Phase in Al-Mg-Si Alloy
Precipitation Behavior of Dispersoids in Al-Mg-Si-Cu-Mn-Cr Alloy during Homogenization Annealing
Precipitation in Al-Cu-Li Alloys: from the Kinetics of T1 Phase Precipitation to Microstructure Development in Friction Stir Welds
Precipitation Morphology in Al-Mg-Si-Sc-Zr Hot-Rolled Sheet
Precipitation of the β-phase and Corrosion Behavior of an Al-6.8 wt.% Mg Alloy
Precipitation Process in a High Mg to Cu Ratio Al-Mg-Cu-Ge Alloy
Predicting Hot Deformation of AA5182 Sheet
Prediction of the Influence of Si Content on the Aging Behavior of Al-Mg-Si-Cu Alloys by Thermodynamic Modeling
Preparation of Al-Sc Master Alloy by Aluminothermic Reaction with Special Molten Salt
Primary Cooling Heat Transfer during the Direct-Chill Casting of Aluminum Alloy AA6111
Process Analysis of the Co-Extrusion of Aluminum and Titanium Alloys
Production of Aluminum-Based Nano-Intermetallics by High-Pressure Torsion
Production of Single Cylinder Engine Piston through Vacuum Die Casting in Sedi Enugu
Properties of Free-Machining Aluminum Alloys at Elevated Temperatures
Properties, Microstructure and Hot Deformation Behavior of Different Al-Zn-Mg (Zr) Alloys
Purification Using High Pressure Molten Aluminum
Quantification of Intergranular Corrosion Susceptibility Dependence on Sample Orientation in Aluminum Alloy 5083-H131
Quantitative Description of the T1 Morphology and Strengthening Mechanisms in an Age-hardenable Al-Li-Cu Alloy
Rapid Solidification of a New Generation Aluminum-Lithium Alloy via Electrospark Deposition
Recycling of Aluminum Alloy with DIMOX and Rheocasting Functionalize High Performance Structural Foam Composite
Research and Development of High-Strength of Al-Zn-Mg-Cu Alloys
Research on Preparation of Ti-Al Alloy by Thermit Reduction
Residual Stress Analysis in AA7449 As-Quenched Thick Plates Using Neutrons and Fe Modelling
Residual Stresses in Thick Aluminum Impeller Forgings Measured by Neutron Diffraction
Reuse of Al Dross as an Engineered Product
Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy
Role of Solute and Transition Metals in Grain Refinement of Aluminum Alloys under Ultrasonic Melt Treatment
Roll Caster to Cast Clad Strip
Self-Propagating Foaming Process of Al-Ti Reactive Precursor for Fabricating Long Scale Porous Materials
SEM Study on Short Time Oxide Films in Molten Pure Aluminium
Semi-Solid Forming of A356 Al Alloy by Rapid Slurry Forming Process
Separation of Inclusion Particles from Liquid Metal by Electromagnetic Force
Short Fatigue Crack Growth Micromechanisms in a Cast Aluminium Piston Alloy
Simulation of Local Material Properties during Laser Beam Welding of Aluminum-Titanium Compounds
Simultaneous Improvement of Strength and Ductility in Al-Ag Alloys Processed by High-Pressure Torsion and Aging
Single Roll Caster to Cast Aluminum Alloy Strip
Solute Distribution and Mechanical Properties of Ultra-Fine-Grained Al-Mg Alloys
Strategy for Enhancing Mechanical Properties of Age-Hardenable Aluminum Alloys by ECAP
Structural Evolution in Aluminium Alloy AA 6082 during HPT Deformation at Increased Temperature
Study on DC Casting Process of Three-Layer Composite Ingots of 4045/3004/4045 Aluminum Alloys
Study on Electromagnet-Air Knife DC Casting Process of Large-Size AA 7055 Aluminum Alloys
Super High Strength Aluminum Alloy Processed by Ball Milling and Hot Extrusion
Tailored Welding Technique for High Strength Al-Cu Alloy for Higher Mechanical Properties
TCAL1 and MOBAL2 - The Development and Validation of New Thermodynamic and Mobility Databases for Aluminium Alloys
Tests of Heat Treatment Conditions of AlZr0.22 Alloy Produced using the Continuous Casting Method
The Application of ICME in Aluminium Castings Simulation
The Bonding Behavior of Co-Extruded Aluminum-Titanium-Compounds
The Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Multicomponent Al-Si Piston Alloys
The Effect of Cu and Cr on Clustering and Precipitation in Al-Mg-Si Alloys
The Effect of Heat Treatment Technology on Mechanical Properties of Al/Al Alloys Clad Sheet Fabricated by Hot Roll Bonding
The Effect of Natural Aging on Quench Sensitivity in Al-Mg-Si Alloys
The Effect of Nickel on the Thermal Conductivity of Al-Si Cast Alloys
The Effect of Planar Solidification on Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloy Plate
The Effect of Stress in Age-forming on Corrosion Behavior of High-strength Aluminum Alloy
The Effect of the Variation of Microstructure in the Friction Stir Welded Zone on the Strain and Tensile Properties of Al2139
The Effect of Welding Parameters and Tool Geometry on Formation of Tunneling Defects during Friction Stir Welding of AA 6061
The Effect of Y on the Microstructure and Properties of Al-Zr Alloy
The Effects of Extra Si and Heat Treatment on the Microstructure and Tensile Properties of Al-15%Mg2Si In-Situ Composite
The Effects of Mischmetal (Rare Earth) and Heat Treatment on the Structure and Tensile Properties of a New Super High Strength Alloy
The Effects of Transition Elements on the Control of Recrystallization of Al-Zn-Mg Extrusion
The Evolution of Mushy Zones in Four Dimensions
The Evolution of Plate and Extruded Products with High Strength and Fracture Toughness
The Good Grain Refining Performance of a New Kind of Al-Ti-C-B Master Alloy
The Grain Refinement of 7050 Alloy Using Al-5Ti-1B and Al-3Ti-0.15C Grain Refiners
The Influence of Alloy Composition on the Microstructure, Tensile Ductility and Formability of 6xxx Alloys
The Influence of Cu on Eutectic Nucleation and Morphology in Hypoeutectic Al-Si Alloys
The Influence of Heat Treatment Parameters on the Electrical Conductivity of AlSi7Mg and AlSi10Mg Aluminum Cast Alloys
The Influence of Initial Microstructure on the Recrystallization Behaviour of Cold-rolled AA3003
The Influence of Microstructure and Composition on the Machinability of Al-Si Alloys
The Influence of Pyrolythic Reactions on the the Aluminium Dross Formation during the Twin Chamber Remelting Process
The Interdependence Model: An Improved Predictor of Grain Size
The Metallurgy of High Fracture Toughness Aluminum-Based Plate Products for Aircraft Internal Structure
The Role of the Si Network to the Stabilization of Hardening Precipitates in the Al-Mg-Si(-Cu) Alloy System
Thermal Modeling and Die Design Tools for Warm Forming Applications
Thermodynamics of Al3Li Nano-Clusters in an Aluminum Solid Solution
Thixoforming of Al-Mg2Si Composite Feedstock Produced by Cooling Slope Casting
Three-Dimensional Analysis of Microstructure in Cast Aluminium Piston Alloys
Threshold Deformation for Exhibiting the Hardening on Annealing Behavior in AA3103 Alloy
Threshold Stress of A3003 Alloy
Through Process Simulation of Al-Sheet Production – a Texture-Based and a Texture-Free Approach
Towards New Aluminium Alloys through Advances in Atom Probe Microscopy
Transforming of the Morphology of Iron Phases in Aluminum Alloys
Turbulent Coagulation of Solid Particles in Molten Aluminum–Kinetics of Cluster Formation
Twinned Dendrite Formation in Al-Zn-Cr under Unusual Solidification Conditions
Ultrasonic Fatigue of SiC Particle Reinforced Aluminum in the VHCF Regime
Utilisation of Atom Probe Data to Model Precipitation and Strengthening in an Al-Mg-Si-Cu Alloy During Natural Ageing and Early-Stage Artificial Ageing
Visualization of Material Flow in Friction Extrusion

Questions about ProgramMaster? Contact programming@programmaster.org