ProgramMaster Logo
Conference Tools for 2016 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2016 TMS Annual Meeting & Exhibition
Symposium Strip Casting of Light Metals
Presentation Title Twin-roll Casting of Carbon Fiber-reinforced and Glass Fiber-reinforced Aluminum Strips
Author(s) Olexandr Grydin, Mykhailo Stolbchenko, Mirko Schaper
On-Site Speaker (Planned) Olexandr Grydin
Abstract Scope The modern requirements for lightweight products force one to make constructional materials with brand new properties. One such group of materials that meets these demands are fiber-reinforced metal-matrix composites. A combination of light and good deformable aluminum with a strong fiber allows obtaining high strength, ductility and corrosion resistance in a single product. In the present article the application of energy-efficient technology of twin-roll casting for production of flat aluminum-matrix composites reinforced with carbon and glass fiber is observed. The corresponding experimental study on the manufacturing of thin strips of pure aluminum reinforced with carbon and glass fiber rovings was carried out using a 370 mm roll diameter labor twin-roll caster. The obtained flat products of 3…5 mm thickness were analyzed by means of mechanical tests and electron microscopy. The results have shown a great potential of the twin-roll casting for production of high-strength fiber-reinforced aluminum strips.
Proceedings Inclusion? Planned: A combination print-CD volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Annealing Curve of 3105 Alloy Produced by Twin Roll and Belt Casting Method
Crystallographic Texture Development of As-cast 3105 Alloy Produced by St/Cu Shell Pair
Development and Numerical Simulation of a Compound Belt Casting Process
Effect of As-cast Strip Thickness and Reduction Prior to Soft Annealing on the Formability of Twin-roll Cast 5754 Sheets
Effect of Heat Treatment on Tensile and Fatigue Properties of Al 3527K Alloy Manufactured by Twin Roll Strip Casting
Effect of Twin-Roll Casting Parameters on Mechanical and Microstructural Properties of AA5083-H321 Sheet
Liquid Metal Feeding Technology for Twin-roll Casting of Magnesium and Aluminium
Microstructure and Mechanical Properties of Ca Containing AZX310 Alloy Sheets Produced via Twin Roll Casting Technology
Microstructure Investigations of Inverse Segregations in Twin-roll Cast AZ31 Strips
Productivity Improvements in Industrial TRC by Heat Loss Analysis along the Process Chain
Q-1: Continuous Fabrication of Direct Recycling Mg Alloy Strip by Melt Conditioned Twin Roll Casting (MC-TRC) Process
Q-3: Microstructure and Properties of SiCp/Al Matrix Composite Strip Fabricating by Twin-roll Casting Process
Substitution of Rare Earth Elements in Magnesium Alloys for the Sheet Production via Twin Roll Casting
Twin-roll Casting of Carbon Fiber-reinforced and Glass Fiber-reinforced Aluminum Strips

Questions about ProgramMaster? Contact programming@programmaster.org