ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Gamma (FCC)/Gamma-Prime (L12) Co-Based Superalloys III
Presentation Title Thermophysical and Mechanical Properties of Multi-nary Single Crystalline Co-base Superalloys
Author(s) Nicklas Volz, Steffen Neumeier, Mathias Gken
On-Site Speaker (Planned) Nicklas Volz
Abstract Scope Advanced single crystalline γ’ strengthened Co-base superalloys with at least nine alloying elements and well balanced mechanical and oxidation properties have been developed and investigated. The influence of Re, Ti and Ta on phase stability, mechani-cal and thermophysical properties in this multinary alloys was determined. A γ’ solvus temperature up to 1174 C and γ’ volume fractions between 40 % and 60 % at 1050 C could be achieved. A full set of elastic constants of one of the alloys is presented which result in a higher Young’s modulus, compared to conventional Ni-base superalloys. Creep properties were investigated at 900 C and 1050 C in <001> direc-tion. Detailed investigations on the creep mechanisms of the Re containing alloy showed that precipitates were sheared already during early stages of creep, revealing that the addition of Re did not improve the mechanical properties.
Proceedings Inclusion? Planned: Supplemental Proceedings volume


A Rapid and Simplified Approach to Accurately Measure Single Crystal Elastic Constants
An ICME-base Investigation of the Homogenization of a Novel VIM/VAR Co-Ni Superalloy
Balancing the Property Suite in Co-base Superalloys
Creep Deformation Mechanisms and Compositional Changes in SX Co-base Superalloys Studied by Means of EM and APT
Crystal Plasticity Finite Element Approach to Modeling the Creep Behavior in Cobalt-based Superalloys
Development of Ni/Co Based Superalloys: CALPHAD and Materials Databases
Effect of Pre-deformation on the Aging Response of Co/Ni-base Superalloys
Effect of Tertiary Gamma Prime on the Creep Performance of a Developmental Co:Ni-Base Superalloy
Elemental Partitioning and Site-occupancy Behavior of Alloying Elements in γ/γ′-Strengthened Co-Ti based Alloys
Elucidating the Effects of Cr on the Microstructure, Oxidation Resistance and Mechanical Properties of Cobalt-based Superalloys
Exploration of Thermo-Mechanical Processing Parameters for a Polycrystalline γ-γ' Cobalt-base Alloy
Low Cycle Fatigue of Single Crystal γ'-Strengthened Co-based Superalloys at 750 °C in Air
M-13: Diffusion in FCC Co-rich Co-Cr-Ni-Ta Alloys
M-14: Effects of Cr and Al Additions on the Microstructure and Mechanical Properties of Co-Ti-W Based Alloys
M-15: The Effect of Titanium on the Tungsten-free Cobalt-base superalloys
Microstructural and Compositional Design of Multicomponent Co/Ni-based Superalloys using High-throughput Diffusion Multiples
Partitioning Preferences of Alloying Elements and their Effect on the Stability of the γʹ/L12-phase in Co-base Superalloys
Solute Segregation Effects at Planar Defects during Creep of CoNi-based Superalloys
Structural Evolution of a Single Crystal Co-base Superalloy during Creep at 1000C/137 MPa
The Effect of Long Term Exposure at Elevated Temperature on the Stability of a Novel Co-Ni Based Superalloy
The Formation of Protective Alumina on γ’-Strengthened Co-Ni-Al-Mo-Ta Alloys during Exposure at Elevated Temperatures
The Hunt for B and C in Grain Boundaries and their Role in Crack Tip Embrittlement
Thermophysical and Mechanical Properties of Multi-nary Single Crystalline Co-base Superalloys
Towards Developing a New Generation of Cobalt Based Superalloys
Wrought Co-base Superalloys – Mechanical Properties and Deformation Mechanisms
γ+γ′ Microstructures in W-free Co-Ta-V- and Co-Nb-V-based Systems

Questions about ProgramMaster? Contact