ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Energy Materials 2017: Materials in Clean Power
Presentation Title High Temperature Oxidation of Ni-base Alloys and Stainless Steels in Supercritical CO2 for Power Systems Applications
Author(s) Gordon R Holcomb, Ímer N Doğan, Joseph Tylczak, Casey Carney, Kyle Rozman, Jeffrey A Hawk
On-Site Speaker (Planned) Gordon R Holcomb
Abstract Scope Materials selection for components exposed to emerging supercritical CO2 (sCO2) power cycles is challenging since materials have not been commonly tested under these conditions. It is expected that these systems will use sCO2 as a working fluid at temperatures up to 800░C and pressures up to 35 MPa. The high temperature oxidation behavior of chromia-forming alloys was investigated in sCO2 and atmospheric pressure CO2. Environments associated with both indirect and direct sCO2 power cycles were examined. The alloys studied included model alloys based on Ni (5-24)Cr, Ni22Cr(0-1.5)Si, Fe22Cr(0-1.5)Si, and Fe22Ni22Cr(0-1.5)Si, commercial iron-base stainless steels E-Brite, 304H and 600, and Ni-base alloys 230, 263, 282, 617, 625, 740H, and 800. Experimental work included coupon exposures up to 2000 hours, mass change determination, SEM and XRD. Distinctions in the materials response with pressure are discussed, along with the effects of chromium and silicon contents.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

C-21: Novel Hydrogen Storage Reaction Pathway of LiBH4+MgH2 Mixtures Enabled by Ball Milling and Aerosol Spraying
C-22: Pyrolysis of Different Wood Species Investigated by TGA-GC-MS
Corrosion of Energy System Materials in Supercritical Carbon Dioxide (sCO2)
Creep-Fatigue-Oxidation Interactions under Fossil Energy Service Conditions
Defect Chemistry of Black Anatase TiO2: An Ab Initio Study
Early Stage Oxidation of Alloy 617 in CO2 Power Cycle Environments
Effect of Pressure and Thermal Cycling on Compatibility in CO2 for Concentrated Solar Power Applications
High Temperature Oxidation of Ni-base Alloys and Stainless Steels in Supercritical CO2 for Power Systems Applications
Manipulating Creep through Modifying Gamma Prime Coarsening Rate in Haynes 282 for A-USC Power Plants
Microstructural Stability of High Cr Containing FeCrAl Alloys with Minor Alloying Additions
Nickel-doped Titania Nanotube Arrays and Their Application in Hydrogen Production
Pb-Bi-Sb and Pb-Bi-Ge: Novel Alternative Alloys for Application as Heat-transport Fluids in Concentrated Solar Power Systems
Phase Relation Prediction for AgxCu1-xGayIn1-ySe2 PV Absorber Layers
Solid-State, High-Shear Manufacturing to Enable Lower Cost and Higher Performance Materials for Energy Conversion
The Composite Materials with Semiconductor and Ionic Conductor for Novel Low Temperature Solid Oxide Fuel Cells
The Impacts of Alternative Fuels and Associated High Water Vapor Content Environments on the Stability and Aging of Turbine Hot-Section Materials
Transient Liquid Phase Bonding of Ni-based-superalloy-H230 for Microchannel Heat Exchanger for Application in Supercritical CO2 Cycles

Questions about ProgramMaster? Contact programming@programmaster.org