ProgramMaster Logo
Conference Tools for Materials Science & Technology 2012
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Propose A Proceedings
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2012
Symposium Surface Protection for Enhanced Materials Performance: Science, Technology and Applications
Presentation Title Oxidation Resistance of Yttria Stabilized Zirconia (YSZ) Composite Coating on Ni-Based Superalloy
Author(s) Nader Tahanpesarandezfuly, Mehdi Ghobeiti Hasab, Kamran Rashnuei
On-Site Speaker (Planned) Nader Tahanpesarandezfuly
Abstract Scope The cyclic oxidation process was performed in a furnace atmosphere at 1100°C for 4 hours. After each cycle, the specimens were cooled inside the furnace. They were inspected and their peripheral conditions were observed. In case of any cracks or spallation in coating wedge the test has been stopped and the time was noted down then coating microstructure was studied.The oxidation test showed that composite coatings of YSZ-alumina having alumina as a mixed YSZ-alumina layer, have better resistance.
Proceedings Inclusion? Undecided

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Aluminized Coating on Steel in SHS Condition
Behavior of MCrAlY and EQ Bonds Coats for Thermal Barrier Applications under Thermal/Thermomechanical Cycling
Challenges and Solutions to TGO Stress Measurement in Engine Run Gas Turbine Components
Coatings for High Temperature Thermal Radiation Control: Optimum Design Procedure and Potential Estimation
Cold Spray Coatings of Aluminum Alloys for Corrosion Resistance
Computational Thermodynamic Modeling Approach to Develop Protective Coatings for Fossil Energy Applications
Damage Evolution in Thermal Barrier Coatings with Thermal Cycling
Damage Evolution Model and Analysis of Thermal Barrier Coating System under in-Phase Thermo-Mechanical Fatigue Condition
Design and Mechanical Characterization of Oxide Multilayer Environmental Barrier Coatings for CMCs
Designing a Diamond-Like Carbon Nanocomposite Tribological Coating for Extreme Environments
Doped Solid Oxide Fuel Cell Electrolytes Produced Via a Combination of Suspension Plasma Spray and Very Low Pressure Plasma Spray
Effect of Rare-Earth Dopants on Microstructures and Thermal Conductivity of Thermal Barrier Coatings Prepared by Suspension Plasma Spray
Effectiveness of Trending Citric Acid Passivation vs. Nitric Acid Passivation on CoCrMo
Environmental Stability and Durability of Environmental Barrier Coatings for SiC/SiC Ceramic Matrix Composites
High Magnification Optical Microscopic System for Surface Observation and Strain Measurement at High Temperature: Application to High Temperature Coatings
High Temperature Tetragonal Phase Stability in the ZrO2-YbO1.5-TaO2.5 System
Influence of Substrate Surface Roughness on Degradation of Polymer Coated Magnesium Alloys
Influence of the Choice of the Substrate from C-C Materials Stuffs on Kinetics of Growth of Sheetings in the Conditions of SHS
Interfacial Shear Strength of Environmental Barrier Coatings Fabricated Via the Polymer Derived Ceramic Route
Metal Doped Nanostructured Diamond-Like Carbon Films
Microcrystalline to Nanostructured Surface Coatings for Enhanced Material Performance in HPHT Corrosive Downstream Environments
Modeling of Thermoelastic Stresses in Bond Coats and Thermal Barrier Coats Using Fast Fourier Transforms
Multilayer Thermal Barrier Coatings Exhibiting Enhanced Toughness and Thermal Conductivity
New Possibilities of Microstructure Formation of Detonation Sprayed Coatings
Oxidation Resistance of Yttria Stabilized Zirconia (YSZ) Composite Coating on Ni-Based Superalloy
Permeability Studies and Grain-Boundary Diffusion in Alumina Scales
Plasma Enhanced Magnetron Sputter (PMES) Deposited Ultra-thick, Superhard, Nanocomposite Coatings for Severe Erosion and Corrosion Environments
Properties of Titanium Nitride Produced by Laser-Sustained Plasma Without Direct Laser Irradiation of the Substrate
Quantification of Rumpling in an MCrAlY TBC Bond Coat Using SEM-Based 3D Imaging
Research of Physicomechanical Properties of Multicomponent Coverings on Copper Alloys
Sensitivity of Thermal Barrier Coating Degradation to Variations of the Chemical Composition of Molten Deposits
Structural Stability of Thermally Gradient Lanthanum Zirconate Films for Thermal Barrier Coatings (TBCs)
Study of Residual Stress in Pulsed DC Microarc Oxidation Coatings on Biocompatible AZ31 Magnesium Alloys
Studying the Resistance against Destruction of Nitrided Steel through Critical Opening of the Crack
The Effect of Hafnium on Oxygen Grain-Boundary Transport in α-Al2O3
The Effects of Environmental Sulfur on the Establishment and Structural Stabilities of Alumina Scales
Thermochemical Considerations in the Design of Multilayered EBCs
Titanium Dopant Effects on the Nb2AlC/Gd2Zr2O7 Interface from Molecular Dynamics Simulation
Transient and Steady State Oxidation of MCrAlY Bond Coats in Simulated High Hydrogen Content Fuel Combustion Environments
Understanding Cavitation Erosion Mechanism in Friction Stir Processed Mild Steel
Wear Performance and Tribological Behaviour of Stainless Steel Subjected to Friction Stir Performance

Questions about ProgramMaster? Contact programming@programmaster.org