ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Scandium Extraction and Use in Aluminum Alloys
Presentation Title Solute Clustering during Natural Ageing in Al-Cu-(Sc)-(Zr) Alloys
Author(s) Lu Jiang, Kathleen Wood, Robert Knott, Anna Sokolova, Timothy Langan, Thomas Dorin
On-Site Speaker (Planned) Lu Jiang
Abstract Scope The present work investigates solute clustering during natural ageing in Al-4wt.%Cu alloys with and without Sc and Zr. The alloys were heat treated to form Al3(Sc, Zr) dispersoids before being solutionised at 500, 520 and 540°C followed by water quenching. Small-angle neutron scattering (SANS) was used to measure the size distribution of Al3(Sc, Zr) dispersoids in the Sc and Zr containing alloy. Clustering kinetics during natural ageing was quantified in-situ with small-angle x-ray scattering (SAXS). The in-situ SAXS results show that the presence of Al3(Sc, Zr) dispersoids significantly alters the solute cluster formation during natural ageing in the Al-Cu alloys. The altered natural ageing behaviour is explained by the presence of vacancies that is strongly influenced by the presence of Al3(Sc, Zr) dispersoids and solution treatment temperature. Atom probe tomography (APT) and transmission electron microscopy (TEM) are also used to reveal the underlying mechanism complementarily with the SAS results.
Proceedings Inclusion? Planned: Light Metals
Keywords Aluminum, Characterization, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Comparative Study of Al-Mg-Ti(-Sc-Zr) Alloys Fabricated by Cold Metal Transfer and Electron Beam Additive Manufacturing
Developing Al-Zr-Sc Alloys as High-temperature-resistant Conductors for Electric Overhead Powerline Applications
Dissolution and Development of Al3(Sc,Zr) Dispersoids in 5025 Structures Produced via Wire Arc Additive Manufacturing
E-30: Scandium Extraction from TiO2 Pigment Production Residues by Ion Exchange: Evaluation of Two Commercial Ion Exchange Resins
E-31: Effect of Sc on Surface Recrystallization of AA7050 Extrusions
Effect of Cooling Rate on W-phase Formation in Al-Cu-Sc Alloys
Effect of Sc and Zr Additions on Dispersoid Microstructure and Mechanical Properties of Hot-rolled AA5083 Alloys
Effect of Sc, Zr and Other REE on the 1XXX Conductive Aluminium Alloys Properties
Effect of Zr and Sc on Intermetallic Morphology and Hardening of an Al-Fe Alloy
Efficiency of Sc for Strengthening and Formability Improvement of 5XXX BiW Sheets
European Scandium for a Lighter and Greener Future
FEA Materials - AlSc Master Alloy Production Technology
Formation of Al3Sc Dispersoids and Associated Strengthening Mechanisms
Investigations into Optimized Industrial Pilot Scale BR Leaching for Sc Extraction
New Scandium Containing Aluminium Welding Wires for Wire + Arc Additive Manufacturing
Scandium Master Alloy Production via Sulfidation and Vacuum Aluminothermic Reduction
Solute Clustering during Natural Ageing in Al-Cu-(Sc)-(Zr) Alloys
Solvent Extraction of Scandium from Titanium Process Solutions
State of the Art Technologies for Scandium Recovery, Purification, and Aluminum-Scandium Alloy Production
Sustainable Scandium Recovery Method from Metallic 3D Printing Powders
Sustainable Selective Separation of Scandium from Acidic Industrial Wastes
The Development of New Aluminum Alloys for the Laser Powder-bed Fusion Process
Use of Sc to Improve the Properties of AA5083 Cast and Rolled Products

Questions about ProgramMaster? Contact programming@programmaster.org