ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Understanding and Predicting Dynamic Behavior of Materials
Presentation Title Transient State Rheological Behavior of Poly(ethylene glycol) Diacrylate Hydrogels at High Shear Strain Rates
Author(s) Ke Luo, Kshitiz Upadhyay, Ghatu Subhash, Douglas E. Spearot
On-Site Speaker (Planned) Douglas E. Spearot
Abstract Scope Transient rheological properties of poly(ethylene glycol) diacrylate (PEGDA) hydrogels under Couette flow conditions are determined via molecular dynamics simulations and validated by high strain rate shear experiments. The transient shear response is characterized via the introduction of dimensionless variables and the application of a self-similar solution to the power-law fluid model. This enables meaningful comparison across the disparate length and time scales between MD simulations and experiments. The momentum diffusion exponent is found to increase with a decrease in PEGDA concentration, which indicates higher shear-thickening behavior in lower PEGDA concentration hydrogels. Shear-thickening mechanisms in hydrogels are explained by computing the average mesh size and the distribution of junction separations. Two stages of deformation are observed under shear, where the first stage is associated with PEGDA chain conformational changes and the second stage is associated with bond length and angular deviations within PEGDA chains.
Proceedings Inclusion? Undecided

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Continuum Mesoscale Perspective of the Dynamic Response of Metals and Explosives
A Grain Level Investigation of Ductile Failure using High-energy X-ray Characterization
A Non-RMI Source of Substantial Quantities of Ejecta Mass Due to Cavitation Bubble Collapse
Alloying and Strain Rate Effects on the Deformation Mechanisms of CoCrNi MPEAs
Anisotropic Damage Model for Cyclotrimethylene Trinitramine (RDX) under Impact
Application of X-ray Phase Contrast Imaging to Spall in Magnesium Alloy AZ31B
Brittle-ductile Failure Transition of Low-symmetry HCP Metal Beryllium under Dynamic Compression
Calibrating Empirical and Micromechanical Constitutive Models beyond 10^6 s^-1
Characteristics of Texture Development in Al-Mg Alloy under High Strain Rate Tension
Controlled Fragment Impact Experiments for Initiation Response of PBXs
Determination of Equation of State in Polyurea Elastomers via Reverberation and Hydrodynamic Instability Experiments
Dynamic Measurements of Solid Carbon Cluster Growth and Morphology in High Explosives Detonation Products
Dynamics of Necking and Fracture in Ductile Porous Materials
Effect of Heat Treatment on Adiabatic Shear Band Microstructures and Internal Strains using HR-EBSD in Segmented Ti-6Al-4V Chips from Turning
Effects of Strain Rate on the Mechanical Properties and Fracture Mechanisms of AHSS Dual Phase Steels
Experimental and Computational Studies of Laser-driven Shocks through Metal Surface Perturbations and Planar Grooves
Experimental Measurements and Modeling of LatticeTotation around Inter and Transgranular Spall Voids in Shocked Copper Bicrystals
Experimental Study on the Dynamic Behavior of Ti6AL4V ELI
Experiments and Modeling to Explore Dynamic Behavior of Materials via Kolsky Bar at Equilibrium and Beyond
G-29: Laser Induced Shock Compression of Covalently Bonded Planetary Materials
G-30: Iron Response in Extreme Compression and Tension Regimes: Complementary NIF and Janus Experiments
High-throughput Atomistic Investigations of Dynamic Defect responses in Crystalline Materials
In-situ Measurement of Dynamic Stress due to Hyper-velocity Impact Using Nanosecond Resolved Raman Spectroscopy
Influence of Grain Boundary Crystallography on Dynamic Failure (Spall)
Influence of Microstructure on The Dynamic Tensile Extrusion of Tantalum
Informing Flow Stress Models at High Strain-rates Through In-situ Imaging of Hole Closure under Dynamic Compression
Investigating the Mesoscale Evolution of Microstructure during Cold Spray Single Particle Impact of BCC Metallic Powders
Laser Shock Wave Induced Mechanical Response on an Additive Manufacturing Ti6Al4V Alloy
Low-stress Shock Hugoniot of Additively Manufactured 304L Stainless Steel
Mechanical Behavior and Deformation Mechanisms of Mg in Shear Using In-situ Synchrotron Radiation X-Ray Diffraction
Mechanical Response and Deformation Modes during High-rate Loading of Multiphase Metal Materials
Meso-scale Topology Effects on the Shock Compression Response of Reactive Powder Mixtures
Mesoscale Modeling of Shock Loading Induced Twinning/De-twinning and Spall Failure Behavior of Ta Microstructures
Micromechanical Methods for Parameterizing Ceramic Failure Models
Modelling the Effect of Microstructure on Elastic Wave Propagation in Platelet-reinforced Composites and Ceramics
Multiscale Modeling to Study Effects of Microstructure in Shocked Hexanitrostilbene
Observation of Metal Particle Deformation inside a Shock Compressed Polymer
On Design Of High-throughput Compact High-explosive Ejecta Source Platform
On the Evolution of Adiabatic Shear Bands in the Beta Titanium Alloy Ti-10V-2Fe-3Al
On the hcp-bcc Phase Transformation in Magnesium Shock Compressed up to 60 GPa
On the Structural Characterization of Amorphous Phase Recovered from Laser Shock Compression
One Dimensional Shock Initiation of the HMX- based Explosive PBX-9012
Predicting Dynamic Strain Rate Response using Model Reification
Role of Shock Loading Orientation and Shock Velocity on the Shock Compression and Spall Behavior of Iron at Atomic Scales
Shock Recompaction of Existing Spall Damage in Copper
Single Crystal Plasticity for the High Rate Deformation of an HMX-based Plastic Bonded Explosive
Slip, Twinning and Phase Transformations in Multiphase Metallic Materials under Shock Loading Conditions
Structure / Property (Constitutive and Dynamic Strength / Damage) Characterization of Additively Manufactured (AM) 316L SS
Sub-surface Observations and Analysis of Indented Polycrystalline Hot-pressed Boron Suboxide (B6O)
The Role of Heterogeneities in Ejecta Production via MD Simulations
Thermodynamic Theory of Crystal Plasticity – Formulation and Application to fcc Copper
Thermodynamics of Pressure-induced Amorphization in Boron Carbide- Unraveling the Mystery through Molecular Dynamic Simulations
Transient State Rheological Behavior of Poly(ethylene glycol) Diacrylate Hydrogels at High Shear Strain Rates
Twinning/Detwinning Behavior of Cu-Ta Trilayer Under Shock Loading Conditions at The Atomic Scale
Understanding and Predicting Damage and Failure at Grain Boundaries in BCC Ta
What Happens to a Microstructurally Stable Nanocrystalline Alloy after Undergoing Shock Loading?

Questions about ProgramMaster? Contact programming@programmaster.org