ProgramMaster Logo
Conference Tools for 2019 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2019 TMS Annual Meeting & Exhibition
Symposium Green Materials Engineering: An EPD Symposium in Honor of Sergio Monteiro
Presentation Title I-48: Evaluation of the Mechanical Characteristics of Geopolymerized Ceramic from Granulated Blast Fumace Slag
Author(s) Kátia Cristina Pereira Faria, Carlos Mauricio Fontes Vieira, Wesley Macario Ferreira, Marcos Yuri Silva Fagundes
On-Site Speaker (Planned) Carlos Mauricio Fontes Vieira
Abstract Scope The present work aims to convert granulated blast fumace slag into a ceramic material by the geopolymerization process. An alkaline solution composed of Na2SiO3 and NaOH, and the granulated residue as binding material, were used in the syntheses. The molar ratio SiO2/Al2O3 used in the blend was based on the values determined by Davidovits. Test specimens were produced by the molding and pressing process. The maturing period was 7 and 14 days at room temperature, 60 and 80 degrees Celsius. The results of flexural strength and compression showed that maturing period, to both at room temperature and at controlled temperature influenced the properties of the geopolymers studied in this Work. The longer maturing period causes a better the mechanical characteristics of the geopolymerized ceramic pieces are identified. Finally, it was observed that this residue can be used as an alternative in the production of geopolymeric materials applied in civil construction.
Proceedings Inclusion? Planned: None Selected

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3D Printing of Live Diatoms to Make Structures with Many Levels of Hierarchy
Application of Natural Nanoparticle in Polymeric Blend of HMSPP/SEBS for Biocide Activity
Ballistic Test of Multilayered Armor with Intermediate Polyester Composite Reinforced with Fique Fabric
Ballistic Tests of Epoxy Matrix Composites Reinforced with Arapaima Fish Scales
Characterization of Arapaima Fish Scales and Related Reinforced Epoxy Matrix Composites by XRD, EDS and SEM
Chemical and Morphological Characterization of Guaruman Fiber
Comparison of Interfacial Adhesion between Polyester and Epoxy Matrix Composites Reinforced with Fique Natural Fiber
Comparison of the Impact Properties of Composites Reinforced by Natural Fibers
Evaluation of Buriti Fabric as Reinforcement of Polymeric Matrix Composite for Ballistic Application as Multilayered Armor System
Evaluation of the Absorbed Energy and Velocity Limits of Reinforced Epoxy Composites with Mallow Natural Fibers Used in Ballistic Protection
Evaluation of the Mechanical, Thermal and Swelling Behavior of Hydrogels Containing Clay Laponite RD
Evaluation of the Projectile's Loss of Energy in Polyester Composite Reinforced with Fique Fabric
Evaluation on the Design of Piassava Fiber Reinforcement Epoxy Matrix Composite for Ballistic Application
Fique Fiber-reinforced Epoxy Composite for Ballistic Armor Against 7.62 mm Ammunition
Fish Skin: A Natural Inspiration for Novel Materials and Coatings
I-43: Artificial Stones from Marble Waste
I-44: Charpy Impact Test of Polymeric Composites with Epoxy Resin Reinforced by Jute Fabric
I-45: Development of Silicate Glasses with Granite Waste
I-46: Evaluation of Feldspathic Rock Waste on the Production of Structural Ceramics with Greater Value Added
I-47: Evaluation of Mechanical, Thermal, and Hydrophobic Properties in Blends before and after the Incorporation of Organic Compound and SiO2
I-48: Evaluation of the Mechanical Characteristics of Geopolymerized Ceramic from Granulated Blast Fumace Slag
I-49: Flexural Test of Composite Eco-friendly Composites Reinforced by Piassava Fiber
I-50: Influence of Eletrofunded Alumina Residue on Red Ceramic Properties
I-51: Izod Impact Testing Composites with Vegetal Polyurethane Matrix Reinforced by Cotton Fabric
I-52: Mechanical Resistance of Artificial Stone Composite Using Waste from Fluorescent Lamp Glass in Polymeric Matrix
I-53: Performance of Natural Curaua Non-woven Fabric Composites as Stand-alone Targets against Standard 9 mm and 7.62 mm Projectiles
I-54: Reuse Of Quarry And Industrial Waste For The Production Of Artificial Ornamental Stones
I-55: Reuse of Quarry Waste in Artificial Stone Production with using Vacuum, Compression and Vibration
I-56: Reuse of the Iron Ore Residue through the Production of Coating
I-57: Soda-lime Glass Waste Utilization for Red Ceramic Production
I-58: Study of the Effect of Incorporation of Laminated Flat Glass’ Waste in a Polymeric Matrix
I-59: Study of the Incorporation of Waste from the Paper Industry in Ceramic Tiles
I-60: Study of the Technological Properties of Multiple Mortar Use with Efficient Addition of Rock Waste
I-61: Technological Properties of Brick Waste-based Geopolymer
I-62: Use of Waste of Ornamental Stone in Ceramic Mass Incorporation in Brazil
Impact Energy Evaluation of Natural Castor Oil Polyurethane Matrix Composites Reinforced with Jute Fabric
Impact Properties of Composites Reinforced by Bamboo Fibers with Polyurethane and Epoxy as Matrix
Incorporation of Dry Biomass of Salvinia Auriculata AUBL from Phytoremediation Process for Traditional Ceramics Production
Izod Impact Test on Epoxy Composites Reinforced with Mallow Fibers
Mechanical and Morphological Properties of Eucalyptus Fibers
Mechanical and Thermal Properties of Clay Filled Recycled Low Density Polyethylene
Natural Fibers Reinforced Polymer Composites Applied in Ballistic Multilayered Armor for Personal Protection - An Overview
Physical and Mechanical Properties of Artificial Stone Produced with Granite Waste and Vegetable Polyurethane
Piassava Fibers: Morphologic and Spectroscopic Aspects
Recycling of Blast Furnace Sludge into Clay Ceramic
Structural Characterization of Fique Fabric Reinforcing Epoxy Matrix Composites by XRD and SEM Analysis
Structure-property Relation of Epoxy Resin with Fique Fibers: Dynamic Behavior using Split-hopkinson Pressure Bar and Charpy Tests
Study of Incorporation of Fuel and Fluxing Wastes in Red Ceramics
Technical Feasibility of Catalyst Waste as Raw Material for Ceramic Industry
The Potential of Micro- and Nano-sized Fillers Extracted from Agroindustry Residues as Reinforcements of Thermoplastic-based Biocomposites - A Review
Thermal Behavior of Epoxy Composites Reinforced with Fique Fabric by DSC
Thermal Characterization of a Nanobiocomposite for Use in Bone Defects

Questions about ProgramMaster? Contact programming@programmaster.org