A-10: Smoothed Particle Hydrodynamics Modeling of Charpy Impact Test of A36 Steel

A-11: Thermal Barrier Coating with Additively Manufactured Nickel Base Superalloy Substrate

A-12: Utilizing Virtual Reality to Help Educate Additive Manufacturing

A-2: A Data-driven Approach to Identify Structural Characteristics that Connect Macroscale Material Properties

A-3: Corrosion and Mechanical Properties of Additively Manufactured 316L Stainless Steel Coated with Epoxy

A-4: Design and Mechanical Properties of 3D Printed Bioinspired Honeycomb Structures

A-5: Development a Customized Inkjet 3D Printer for Ceramic Component Fabrication

A-6: Fabrication and Characterizations of 3D Printed Lithium-Ion Battery Electrodes

A-7: Layerwise Thermal Process Simulation for Laser Powder Bed Fusion: Calibration and Validation with Infrared Camera

A-8: Modeling of Fatigue Behavior of 3D Printed Polycrystal Metals

A-9: Reducing the Order of a Kinetic Monte Carlo Potts Solidification Model with Machine Learning

A Modeling Tool for Mechanical Performance Prediction and Qualification of Additive Manufacturing Parts

A Parametric Molecular Dynamics Study of Additive Nanomanufacturing: Effects of Size, Misorientation, and Temperature on Sintering Characteristics

Additive Manufacturing Beyond the Gaussian Beam: Insights from Mesoscale Modeling Studies

Additive Manufacturing Moment Measure: A Reduced Order Model of the Laser Powder Bed Fusion Process

Additively Manufactured Multi-metallic Design for Ti-6Al-4V and Inconel 718 Joining by Scheil-Gulliver Ternary Projection Diagrams

Analyzing Uncertainty in Modeled Additive Process-Microstructure-Property Relationships Using the ExaAM Framework

Anisotropic Distortion Modeling during Sintering of Binder Jet Printed Parts

CFD Simulations of Spatter Removal in a Laser Powder Bed Fusion Machine

Computational Fluid Dynamics Data-driven Heat Source Model for Finite Element Process Simulation in Laser Powder Bed Fusion Additive Manufacturing

Crystal Plasticity Modeling Effort to Capture Microstructural Variations in Cold Sprayed Materials

Development of Rapid Solidification Model for Additive Manufacturing and Application to Al-Si Alloys

Discrete Element Method Based Simulations of Metal Powder Pouring and Raking Processes in Additive Manufacturing

Effects of a Novel Post Processing Technique on Mechanical Performance of AlSi10Mg Produced via LPBF

Embracing Variability: Machine Learning-based Sequential Optimization of Additive Manufacturing Processes

Energy and Microstructural Evolution of In-situ Alloyed Cu-4at% Cr -2 at% Nb via Laser Powder Bed Fusion

Generating Novel Porosity Distributions Produced by Metal Additive Manufacturing via Deep Learning

In Situ Confocal Imaging and Quantification of Defects in Binder-Jet Printed (BJP) Steel Parts

Increasing the Service Life of the Trimming Punch Using Nimonic Cutting Edge

Machine Learning Segmentation Methods for Fatigue Fracture Surface Defect Analyses

Mesoscale Modeling of the Additively Manufactured 316L: Effects of Microstructure and Microscale Residual Stresses

Microstructure Predictions in Additive Manufacturing from Analytical Solidification Models – A Critical Assessment of Simplifying Assumptions

Modeling the Solidification Cracking Susceptibility of Additively Manufactured Alloys

Modified Inherent Strain Modeling of Residual Stress and Distortion in WAAM and LPBF Processes

Parent Grain Reconstruction Using Orientation Imaging Microscopy and Deep Learning

Phase Stability and Mechanical Properties of Ni-Al and Ni-Cr Binary Solid Solutions Using CASTEP Supercell Approach

Planar and Full-Process Modeling of the Powder-Bed Fusion Ti-6Al-4V Columnar-to-Equiaxed Transition Behavior

Powder Bed Packing Density Dependence on Particle Size Distribution: Simulation and Experimental Analysis

Prediction of Microstructure Formation Under Rapid Solidification Using a Deep Learning Approach

Printability and Failure Susceptibility of Different Powder Layer Thicknesses in Laser Powder Bed Fusion

Quantitative Analysis of Computed Tomography Characterization of Porosity in AM Ti64 Using Serial Sectioning Ground Truth

Rapid Qualification of Wire Feed Direct Energy Deposition Process Builds Using ICME Approach

Residual Stress Modeling during Wire Arc Additive Manufacturing of Low Temperature Transformation Alloy

Sparse Sampling for 3D Electron Backscatter Diffraction

Studying Melt Pool Variation and Its Effects on the Formation of Porous Defects via GPU-based Process Simulation

Tailoring Formation of TCP Phases during Additively Manufactured Inconel 625 by CALPHAD-based Simulations with Experimental Validations

The Effect of the Process Environment on Gas and Particle Entrainment in Laser Powder Bed Fusion

Thermal Modeling of Laser Powder Bed Fusion Additive Manufacturing of Refractory Materials

Thermomechanical Modeling of Axisymmetric Geometries for Laser Hot Wire Additive Manufacturing

Towards Qualification and Certification of Laser Powder Bed Fusion Ti-6Al-4V with In-Situ Process Monitoring and Automated Defect Detection

Uncertainty Quantification in Process-Structure-Properties Simulations of Additive Manufactured Ti-6Al-4V

Using Generative Adversarial Networks for the Design of Metamaterials to Reach New Property Spaces

Using Machine Learning to Characterize Powder Behavior and Surface Roughness in Powder Bed Fusion AM

Questions about ProgramMaster? Contact programming@programmaster.org