|About this Abstract
||2017 TMS Annual Meeting & Exhibition
||Friction Stir Welding and Processing IX
||A-87: Fabrication and Characterization of Al/Al2O3-SiC Hybrid Surface Nano Composite by Friction Stir Process
||Parumandla Naresh, Adepu Kumar
|On-Site Speaker (Planned)
In this investigation, a new technique is used to produce a hybrid surface nano composite by friction stir processing (FSP). Nano Al2O3 and SiC reinforcement were added into the AA 6061 –T6 matrix material and fabricated a hybrid surface nano composite by FSP. A large surface region was produced as surface composite by applying this unique technique. Single pass FSP is applied to fabricate the Al/Al2O3-SiC composite. Distribution of the nano reinforcement particles in the processed region was analyzed by using optical microscope, SEM-EDX and phase volume fraction analysis. A superior microstructural, microhardness and wear resistance properties were achieved.
||Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)