ProgramMaster Logo
Conference Tools for Materials Science & Technology 2019
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2019
Symposium Advanced High Strength Steels / From Design to End Users
Presentation Title Creation of Wearproof Eutecticum Composition Materials for the Details of the High Temperature Dynamic Systems
Author(s) Volodymyr Tsyganov, Leonid Ivschenko, Harold Byalik, Richard Mokhnach, Nataliia Sakhniuk
On-Site Speaker (Planned) Volodymyr Tsyganov
Abstract Scope It is shown that eutecticum wearproof composition materials answer the requirements of high hot - resistance, heat-tolerance, ability to resist the action of small cyclical fatigued deformations, equal wearproofness in all range of operating temperatures, technologicalness. Development of such alloys is recommended on the basis of eutecticum reaction of crystallization at forming of alloy from the liquid state. Phases that are included in a eutecticum substantially differ from each other, but characterized by thermodynamics compatibility. Each of phases introduces characteristic for her properties in a eutecticum alloy, giving new properties to him. Taking into account this principle eutecticum alloys are offered on the basis of transitional metals with the refractory phases of introduction (compounds metals of IV - VA of sub - groups with the elements of introduction - carbon, boron, nitrogen, oxygen) - carbides and borides. These alloys are applied in industry of air engine building enterprises of industry.
Proceedings Inclusion? Definite: At-meeting proceedings

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3rd Generation AHSS by Thin Slab Technology
Approach for Developing Ultra High Strength Fastener Steel for Automotive Application
Correlation between EBSD Quantification and Dilatometry Examination of an X70 Steel
Creation of Wearproof Eutecticum Composition Materials for the Details of the High Temperature Dynamic Systems
Effect of Ni Content on Impact Toughness in Tempered Matensitic Steels
Effect of Retained Austenite Control with Multi-step Heat treatment on the Microstructure Evolution and Mechanical Properties of Direct Quenched High Hardness Armor (HHA) Steel
Effect of Strain Rate on the Columnar to Equiaxed Transition in an As-cast Medium Carbon Low Alloy Steel during Hot Deformation
Effect of Yttrium-based Rare Earth on the Microstructure and Impact Toughness of E36 Shipbuilding Steel
Evolution of Microstructure and Mechanical Properties during Conventional and Ultra-fast Heating of a Low Carbon Steel: The Effect of Soaking Time
Hydrogen Uptake and Its Effect on Mechanical and Fracture Behavior of Ultra-high Strength Press-hardened Steels
Microstructure and Mechanical Properties of Intercritical Annealed 7 Mn Steels with Additional Warm-rolling
P3-82: Development of Copper Strengthened 0.2%C Low Alloyed Steel
P3-83: Nucleation of Graphite Particles Formed in Medium Carbon Steel after Graphitising Anneal
P3-84: Optimizations of Submerged Entry Nozzle in a Steel Slab Continuous Casting Mold
Steel-copper Nano Composited Materials
Strengthening of 3rd Generation AHSS during Cold Stamping
Stronger than Titanium, Lighter than Aluminum, Stops Blast/Bullets: Readily Weldable 1500-2000MPa Armor Technology for Lightweight Structure and Stampings

Questions about ProgramMaster? Contact programming@programmaster.org