A Current Efficiency Prediction Model Based on Electrode Kinetics for Iron and Copper during Copper Electrowinning

CaCl2-O2 Roasting of Stibnite and a Complex Copper Concentrate at 500-650°C

Chalcogenide Melts Study for High Temperature Thermoelectricity

Convection-Diffusion Model of Lithium-Bismuth Liquid Metal Batteries

D-46: DEM Simulation of Dispersion of Cohesive Particles by Spontaneous Inter-particle Percolation in a 3D Random Packed Bed

D-47: Effects of High Energy Ag7+ Ion Irradiation on the Magnetic and Topographical Properties of Amorphous Co–Fe Thin Films

D-49: Ground-based Experiments Using an Electrostatic Levitator and Numerical Modeling of Convection Inside Electromagnetically-levitated Molten Iron-cobalt Droplets in Support of Space Experiments

D-50: Hybrid Modeling for Endpoint Carbon Content Prediction in EAF Steelmaking

D-57: Structural and Deformation Behavior of Different Hematite Ore Pellets

Dephosphorization Kinetics between Bloated Metal Droplet and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal

Desulfurization of Copper-iron Reduced from Copper Slag

Effect of BO1.5 Addition on the Thermal Conductivity and the Structure of the CaO-BO1.5-AlO1.5 Mold Flux System

Effect of Chloride Ions on the Copper Extraction Using LIX 984N and Acorga M5910

Effects of Aging Treatment on the Microstructure and Mechanical Properties of a Nanoprecipitates-strengthened Ferritic Steel

Electron Beam Surface Hardening of AISI H13 Tool Steel

Electrovortex Flow in Metal Melts: Experiment and Simulation

Experimental Study on Formation Mechanism of Hot Charging Cracks of HSLA Steel

Highly Productive Machining of the Newest, Super Hard Intractable Composite-ceramic Materials

Improvement of Tensile Properties of Vertical-twin-roll-cast Ti/Al Clad Sheets

Influence of Heat Treatment on PKS-HSS Cutting Tool (ASTM A600) and its Behaviour during Machining of Mild Steel (ASTM A36)

Interface Fields Affecting Solidification Microstructure

Leaching Recovery of Silver from Used Radiographic Films

Manufacturing of a New Type of High Strength High Conductivity Cu–Cr Alloy

Mapping and Evaluating All the Ways to Remove Copper from Steel

Measurement of Thermodynamic Property of Mg in Molten Iron Using Transpiration Method

Microstructure Characterization and Mechanical Properties of Mg-9Al (wt.%) Alloy during Low-temperature Equal Channel Angular Extrusion (ECAE)

Research on Sulfur Conversion Behavior in the Oxygen Pressure Acid Leaching Process for the High Indium Sphalerite

Research on the Pinpoint Controlling of CRA N08028 OCTG Microstructure and Properties

Spatio-temporal Evolution Modeling of the Laser Helical Drilling with Femtosecond Pulses

Study on Emulsion Phenomena and Field Flow Pattern in Side-blown Copper Smelting Process

Study on Minimum Starting Energy of Self-stirring Reactor Driven by Pressure Energy

Study on the Heat Treatment of UNS N 10003 Alloy after Cold Working

Surface Tension and Viscosity of Gamma-TiAl Alloys and Ti6Al4V Measured in Containerless Electromagnetic Processing under Reduced Gravity Conditions

The Effect of a Sulfur Addition on the Formation and Behavior of CaS Inclusions in a Steel Melt during a Secondary Refining Process without a Ca-treatment

The K2SO4-CaSO4 System and Its Role in Fouling and Slagging During High-Temperature Processes

The Study of Copper Leaching from Conichalcite and Chalcopyrite Using Alternative Lixiviants

The Use of the PDA Method to Obtain Process Feedback on Inclusion Characteristics Based on Production Samples

Thermodynamic Properties of Magnetic Semiconductors Ag2FeSn3S8 and Ag2FeSnS4 Determined by the EMF Method

Ultrasound for Next-generation Alloy Casting

Waste Lithium-ion Battery Recycling in JX Nippon Mining & Metals Corporation

Yield Strength Prediction in 3D during Local Heat Treatment of Structural A356 Alloy Components in Combination with Thermal-stress Analysis

Questions about ProgramMaster? Contact programming@programmaster.org