ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Pan American Materials Congress: Materials for Infrastructure
Presentation Title PAN-25: Calcium Aluminate Cements Under High Temperature Oxidation Environment
Author(s) John Fernando Zapata, Henry Colorado, Maryory Gómez
On-Site Speaker (Planned) John Fernando Zapata
Abstract Scope In this research different formulations of calcium aluminate cements (CAC) have been exposed to high temperature oxidation environments. Cement paste samples were made at 0.3, 0.4 and 0.5 water to cement (W/C) ratios. Both the raw cement powders and their corresponding samples after hydration were characterized in their microstructure by scanning electron microscopy, X-ray diffraction, granulometry, x-ray fluorescence, density, and compression tests. Samples were exposed to 500 and 1000˚C in a furnace open to air.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)


Anticorrosion and Adsorption Mechanism of Rhizophora Mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete
Cassia Fistula Leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl
Colombian Natural Fibers for Structural Materials
Development of Co-B-SiC Coatings for Use on Aeronautical and Automobile Industries
Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment
Fiber Reinforced Concrete Manufactured with Electric Arc Furnace Slag
Jigs, Hydro-cyclones and Sensor-based Sorting to Value Recycled Aggregates
PAN-25: Calcium Aluminate Cements Under High Temperature Oxidation Environment
PAN-26: Carbonation Study in Calcium Aluminate Cement Pastes
Performance of Hydraulic Mixes Manufactured with Electric Arc Furnace Slag Aggregates
Physical and Mechanical Properties of Bricks with Added Industrial Waste
Porous Asphalt Mixtures With 100% Siderurgic Aggregates
Portland Cement Paste Blended With Pulverized Coconut Fibers

Questions about ProgramMaster? Contact