|About this Abstract
||2016 TMS Annual Meeting & Exhibition
||Thermodynamic Applications, Optimizations and Simulations in High-Temperature Processes: An EPD Symposium in Honor of Christopher W. Bale's 70th Birthday
||Rapid Dissolution of Quicklime into Molten Slag by Internally Formed Gas
||Nobuhiro Maruoka, Hiroshi Nogami
|On-Site Speaker (Planned)
In steelmaking process, quicklime is used to produce CaO based slag. Although rapid dissolution of quicklime is required for high-efficiency refining, it is known that the rate decreases when dicalcium silicate (C2S) layer forms around the quicklime by reacting with slag. The equation which driving force is the difference of CaO content between in slag and a liquid phase of slag saturated by C2S has been often used for estimating the dissolution rate of lime, in which this saturated value is thermodynamically determined. The authors, however, revealed that the quicklime used in actual operation showed much faster dissolving rate than that of completely calcined lime that is covered by C2S layer during dissolution into slag. This was caused by a gas formation due to a thermal decomposition of residual limestone existed in quicklime. In this study, the dissolution rate of quicklime with the gas formation is quantitatively investigated.
||Planned: TMS Journal: Metallurgical and Materials Transactions