ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Pan American Materials Congress: Steels
Presentation Title PAN-60: Effect of Titanium Sulfide Precipitates on Grain Size in Low Carbon Steel
Author(s) Yuan Wu
On-Site Speaker (Planned) Yuan Wu
Abstract Scope The effect of titanium sulfide particles on the grain size characteristic of low carbon steel was analyzed. Optical microscope (OM), scanning electron microscope (SEM) were used to characterize the grain size and particles. The result showed that grain size increased from 19.95 μm to 60.56 μm after heat treatment. The particles were mainly titanium sulfide in the size range of 0.2-0.8 μm and the volume fraction decreased significantly from 0.0084% to 0.0023%. The thermodynamic calculation resulted that these particles were dissolved during heat treatment. The pinning force of grain boundary and the driving force of grain growth were calculated. Based on experimental results and theoretical calculations, titanium sulfide particles with diameter from 0.2 μm to 0.8 μm and volume fraction of 0.0084% would be sufficient to inhibit the ferrite grain growth.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Controlling Mold Heat Transfer by Dispersed Metallic Particles in Slag Film during Continuous Casting of Steels
Developing Sustainable Pipeline Steels
Dissolution of MgO Containing Additions in Steelmaking Slag and Its Impact on the Formation of Magnesiowustite
Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model
Hot-stamping Response of Laser Welds in Low-carbon Steels
Influence of a Rapid Heating on the Microstructure and Properties of Press-hardening Steel Sheets
Jansto: New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands
Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling
Modeling of Metal-Slag Mass and Momentum Exchanges in Gas-Stirred Ladles
Modeling Precipitation and Dissolution of Microalloying Carbonitrides in Steels Using Computational Thermodynamics- techniques, Possibilities and Present Challenges
New Challenges in Thermomechanical Processing: Applications in the Cold Mill
PAN-60: Effect of Titanium Sulfide Precipitates on Grain Size in Low Carbon Steel
PAN-61: Hydrogen Gaseous Embrittlent Effect over Mechanical Properties of a Heat Treated Experimental Microalloyed Steel with Different Cooling Rates
PAN-62: Influence of Oxide Size and Composition on MnS Formation in Continuous Casting Slab of Low Carbon Steel
PAN-63: Kinetic Study of the Austenite Decomposition during Continuous Cooling in a Welding Steel
PAN-64: Study of Ductile Austemperized Iron Alloyed with V, Mo AND Cr
PAN-66: Tempering Response of Bainitic and Martensitic Microstructures
PAN-67: Using CCT and TTT Diagrams Obtained by Simulation for Developing AHSS
Study on Adjustment and Optimization of LF Refining Slag of Spring Steel 55SiCrA
The Development of NbC Reinforced Martensitic Stainless Steel Composites for High Wear and Corrosive Environments
The Effect of Deoxidation Practice on Quality Characteristics of Converter Refined AISI 1006 Steel
The Effect of Particle Speed and Impact Angle on the Erosion of Newly Developed API X120 Pipeline Steel
The Influence of Hydrogen on Tensile Properties of TRIP-aided Bainitic Ferrite Steels with Carbon/Manganese Variations
The Research on the Relationship between Gas Movement Behaviors and Circulating Flow of the Molten Steel in RH

Questions about ProgramMaster? Contact programming@programmaster.org