ProgramMaster Logo
Conference Tools for MS&T21: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T21: Materials Science & Technology
Symposium Advances in Ferrous Metallurgy
Presentation Title Thermodynamics and Kinetics of Coke Breeze Combustion Under Different Oxygen Content in Sintering Process
Author(s) Dongqing Wang
On-Site Speaker (Planned) Dongqing Wang
Abstract Scope In order to investigate the influence of oxygen content in sintering flue gas on the heat generated by coke combustion and sintering flue gas , the thermodynamic calculation was carried out with FactSage software. Combustion kinetics under different oxygen content was studied with thermogravimetric analyzer. Thermodynamic research results showed that under the condition of sintering with iron ore fines, the oxygen content in the combustion-supporting air was abundant. When the oxygen content was more than 7%, the solid fuel in the sintered layer could meet the combustion conditions and release all the heat. Kinetic experiment results showed that the combustion rate of coke breeze in 5 minutes with 13% oxygen content in flue gas was equivalent to combustion rate of coke breeze of in 2.75 minutes21% oxygen content in flue gas. Therefore, if the combustion time was long enough, the heat released by low-oxygen flue gas would be basically equal to that of high-oxygen flue gas.

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3D Non-destructive Characterization of Texture Evolution in Electrical Steels with Lab-based Diffraction Contrast Tomography
Cost Modeling and Life Cycle Analysis of Low-Emissions Iron Production
Development of Fine Grained Steel for Cold Heading Application
Effect of Alloying Content on Fractional Softening Behavior and Microstructural Evolution During Double-twist Torsion Testing of Microalloyed Steels
Effect of CO2 Injection into Blast Furnace Tuyeres on Smelting Parameters
Evaluation of Different Austenitization Sub-Models for 22MnB5 Steel Using Bayesian Model Selection Technique
High Strength Low Alloy Steels strengthened by Heusler precipitates
Hole Expansion Performance of Three High Strength Steels: Observation of Room Temperature Strain Ageing Phenomena
Impact of Alloy Composition on the Hot Ductility of Steel during Continuous Casting
New Roll Alloys Concepts Using in Finishing Stands of Rebar Rolling
Radiative Properties of Al-Si Coated 22MnB5 Steel
Reducing the Effects of Texture on Phase Fraction Measurement of Retained Austenite Using X-ray Diffraction
Research on the Phosphate Capacity of CaO-FeO-MgO-SiO2-MnO-TiO2-V2O5-P2O5 Slags
Structure Optimizations of Submerged Entry Nozzle in a Steel Slab Continuous Casting Mold
Studying Processing – Microstructure – Mechanical Property Correlation in a Multi-phase Advanced High Strength Steel
The Effect of Energy-power Parameters of Hot Rolling on Structure and Properties of Low Alloyed Steels
The Study and Optimization of Calcium Flux for Self-fluxed Pellets
Thermodynamics and Kinetics of Coke Breeze Combustion Under Different Oxygen Content in Sintering Process

Questions about ProgramMaster? Contact programming@programmaster.org