|About this Abstract
||2022 TMS Annual Meeting & Exhibition
||Advances in Multi-Principal Elements Alloys X
||Effect of rolling and annealing temperature on the mechanical properties of CrMnFeCoNi high-entropy alloy
||Werner Skrotzki, Sebastian Schmidt, G. Dan Sathiaraj, S. Satheesh Kumar, Bartosz Sulkowski, Satyam Suwas, Jörn Jaschinski, Aurimas Pukenas, Bin Gu
|On-Site Speaker (Planned)
Equiatomic CrMnFeCoNi high-entropy alloy was cold- and hot-rolled (room temperature and 700°C) to a thickness reduction of 90%. Subsequently, the rolled samples were annealed for 1 h at temperatures between 450°C and 800°C. The microstructure and texture of as-rolled and annealed samples were studied by scanning electron microscopy coupled with electron backscatter diffraction and energy-dispersive X-ray spectroscopy. The evolution of microstructure and texture has been found to be governed by dislocation slip, recrystallization and annealing twin formation. Moreover, during processing at certain temperatures concurrent precipitation is observed. The mechanical properties of all samples were derived from tensile stress-strain curves determined at room temperature. Based on microstructural analyses the strength of the thermo-mechanically processed samples can be quantitatively explained by a combination of different strengthening mechanisms, such as dislocation, grain boundary and precipitation hardening.
||High-Entropy Alloys, Mechanical Properties, Other