ProgramMaster Logo
Conference Tools for 2016 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2016 TMS Annual Meeting & Exhibition
Symposium Materials in Clean Power Systems IX: Durability of Materials
Presentation Title Mechanical Characterization of Solid Acid Materials for Intermediate Temperature Fuel Cells
Author(s) Ryan S Ginder, George M Pharr
On-Site Speaker (Planned) Ryan S Ginder
Abstract Scope Recently, solid acid materials have become of great interest to fuel cell researchers in no small part due to their possessing benefits over conventional proton exchange membrane technology. Examples include no need for complex water management and CO2 and CO tolerance allowing greater flexibility in fuel choices. However, one of the current limitations for existing solid acid fuel cell prototypes remains durability, including mechanical stability of the electrolyte. For solid acids to function in a fuel cell, they must first be raised into an elevated temperature superprotonic phase. In this state, these materials begin to exhibit substantial plasticity which can limit device lifetimes. However, to date little research has actually been done to quantity these materials’ basic mechanical properties and creep behavior. In this presentation, preliminary data is presented quantifying how these materials behave under compressive loading conditions relevant for engineering applications.
Proceedings Inclusion? Planned: A print-only volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Characterization of Titanium Thin-Film Liquid/Gas Diffusion Layer in Clean and Renewable Power Systems
Computational Modeling of Metal Oxidation
Corrosion Behaviour of 9-12Cr Ferritic Steels and 18-25Cr Austenitic Steels in Supercritical CO2
Corrosion of Energy System Materials in Supercritical Carbon Dioxide (sCO2)
Corrosion of Nickel-base Alloys by Supercritical CO2
Corrosion of Supercritical CO2 Turbomachinary Components
Cyclic Behavior and Fatigue Properties for Haynes 282
Development of Creep Resistant High Cr containing FeCrAl Ferritic Alloys for Fossil Energy Applications
Development of HfB2-ZrB2 Based Ceramics as High Temperature Electrode Materials for MHD Direct Power Extraction System
Effect of Temperature and Pressure on Supercritical CO2 Compatibility of Structural Alloys
Electrodeposition of MCrAlY and Pt-Modified MCrAlY Coatings for Gas-Turbine Engine Applications
Evaluation of the Creep-Rupture Behavior of Haynes Alloy 282 for Advanced Ultrasupercritical Boiler Service
Heat Resistant Alloy Development for Fossil Energy Power Generation
High-Temperature Corrosion of Diffusion Bonded Haynes 230 in Supercritical CO2 Cycle Conditions
High Pressure Steam Oxidation of Boiler and Turbine Alloys
High Temperature Corrosion in Molten Salts & Molten Salts Technology: Past, Present and Future
High Temperature Oxidation and Mechanical Properties of Novel Al-containing Fe-based ODS Alloys
Long-term Microstructural Stability in Haynes 282 after High Temperature Exposure
M-1: Effect of High Temperature Cyclic Oxidation on the Deformation of ODS and Cast FeCrAlY Alloys
M-2: Effect of Mechanical Loading on Galvanic Corrosion Using Electrochemical Characterization Techniques and Depth Profiling
M-3: Electrodeposition of Amorphous/Nanocrystalline Ni–Mo Alloy for Hydrogen Evolution Reaction
M-4: Phyllanthus Muellerianus and Triethanolamine Synergistic Effects on Steel-reinforced Concrete in 0.5 M H2SO4: Implication for Clean Corrosion-protection of Wind-energy Structures in Industrial Environment
Materials Issues for Supercritical CO2 above 700C
Mechanical Characterization of Solid Acid Materials for Intermediate Temperature Fuel Cells
Precipitation Dynamics and the Role of Microstructural Changes in the Development of Alumina-Forming Austenitic Stainless Steels
Weldability of Gradient Tubes for High Temperature Application

Questions about ProgramMaster? Contact programming@programmaster.org