ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Pan American Materials Congress: Materials for Oil and Gas Industry
Presentation Title Structural Integrity of Pipelines
Author(s) Anibal Carlos Di Luch, Nicolas Oyarzabal
On-Site Speaker (Planned) Anibal Carlos Di Luch
Abstract Scope This work is part of a comprehensive structural integrity program of pipelines in Argentina, in particular it is applied to a gas pipeline in the North-East region. It is composed mostly of pipes API 5L grade X70 PSL 2, 24 inches nominal diameter and 11.9 mm wall thickness, manufactured by roll bending expand RBE and submerged arc welded SAW inside and outside. For girth welds assessment API Standard 1104 and BS 7910 guidelines are followed. This study is based on engineering critical assessment (ECA) and fitness for service (FFS) and it is required to perform complex tests and calculations like CTOD testing to assess both the weld metal and the heat affected zone. A sensitivity analysis is finally presented showing the effect of imperfection length and height on a failure assessment diagram (FAD).
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Study on the Mechanisms Responsible for Dynamic Strain Aging Phenomenon in Inconel 718 Superalloy
Adsorption of Organosulfur Compounds on Doped Boron Nitride Nanostructures
Design and Thermo-mechanical Processing of Steel Grade APIX70 PSL2 for Use in Line-pipe at Oil&Gas Industry
Dynamic Transformation and Retransformation during the Simulated Plate Rolling of an X70 Pipeline Steel
Effect of Heat Input on the Microstructure and Toughness of Welded API Pipelines
Evaluation of Non-Destructive Techniques (Thermography, Ultrasound and Eddy Current) for Detection of Failures in Metallic Substrates with Composite Anticorrosive Coatings
High Temperature In-Situ X-ray Analysis of a Lean Duplex Stainless Steel
Materials for Facilities Liquefied Petroleum Gas as NFPA
PAN-27: Blends of PVDF with Its Processing Waste: Study of the Mechanical Properties of the Blends Thermally Aged
Structural Integrity of Pipelines
The Corrosion Behavior of Newly Developed API X120 Pipeline Steel in H2S and Moderate Temperature Environments

Questions about ProgramMaster? Contact programming@programmaster.org