ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Electrode Technology for Aluminum Production
Presentation Title Modelling of Gas Injection on Anode Baking Furnace and Application to Operations
Author(s) Sandra Besson, Solène Bache, Arnaud Bourgier, Jean-Philippe Schneider, Thierry Conte
On-Site Speaker (Planned) Solène Bache
Abstract Scope In the aluminium industry, the carbon anodes are baked in the anode baking furnace by means of the combustion of both the volatile matters emitted by the green anodes and the fuel injected. The essential objectives for baking furnaces are to achieve a uniform baking level while optimizing the fuel consumption, maintaining the refractory condition, and limiting the emissions. Those requirements are strongly influenced by the fuel injection in the heating sections, and the precise study of this phenomenon is essential to better grasp the impact of the process parameters. In this paper, a 3D model for the combustion of pulses of gas in the heating sections will be presented. This model focuses on the flame behavior in order to precisely represent the gas pulses, the quality of the combustion, the heat transfer and the emissions. The effect of the parameter variations on operation will also be presented.
Proceedings Inclusion? Planned: Light Metals

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

10 Years of Anode Research and Development: Alcoa & Université Laval Experience
Additive Selection for Coal Tar Pitch Modification in Aluminum Industry
An EXAFS and XANES Study of V, Ni, and Fe Speciation in Cokes for Anodes Used in Aluminum Production
Anhydrous Carbon Pellets – An Engineered CPC Raw Material
Carbon Anode Raw Materials – Where is the Cutting Edge?
Charcoal and Use of Green Binder for Use in Carbon Anodes in the Aluminium Industry
Development of a Soft Sensor for Detecting Overpitched Green Anodes
Diffusion Measurements of CO2 within Carbon Anodes for Aluminium Smelting
Energy Saving in Hall-Héroult Cell by Optimization of Anode Assembly Design
Environmental Benefits of Using Spent Pot Lining (SPL) in Cement Production
Higher Baking and Production Levels in Anode Baking Furnaces and Associated Challenges
How to Improve the Environmental Efficiency of the Hall-Heroult Process While Producing and Using Carbon Anodes?
Influence of Particle Shape and Porosity on the Bulk Density of Anode Grade Petroleum Coke
Major Reconstruction of Central Casing of Open Top Baking Furnace with a View to Increase Its Lifespan and Reduce the Total Costs Comparing to Full Reconstruction
Modelling of Gas Injection on Anode Baking Furnace and Application to Operations
Purification of Graphite by Thermal Vacuum Treatment of Spent Potlining
Ready-to-Use Cathodes for the Hall-Héroult Process
Redesigning of Current Carrying Conductor - The Energy Reduction Initiative in Low Amperage Hall-Héroult Cell
Solids Flow Considerations and their Impact in Smelter Carbon Plant Operations and Product Quality
Sustainable Spent Pot Lining Management Guidance
Testing of SERMA Technology on Industrial Anodes for Quality Control in Aluminum Production
The Development of Anode Shape, Size and Assembly Designs - Past Present and Future Needs
The LCL&L Process: A Sustainable Solution for the Treatment and Recycling of Spent Potlining
Trends in Carbon Anode Production

Questions about ProgramMaster? Contact programming@programmaster.org