ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Recent Advances in Functional Materials for Printed, Flexible and Wearable Electronics
Presentation Title High Performance Sensors and Antennas by 2D and 3D Printing of Nanoparticles
Author(s) Md Taibur Rahman, Arya Rahimi, Subhanshu Gupta, Luke Renaud, Deuk Heo, C. V. Ramana, Rahul Panat
On-Site Speaker (Planned) Md Taibur Rahman
Abstract Scope Printed and sintered nanoparticle films offer unique advantages such as high surface area, low strain, and highly controlled microstructure. Further, printing allows the fabrication of microscale electronic features that are not possible to make via conventional lithography techniques. In this talk, we present the design, manufacture, and performance of printed touch sensors, biosensors, and high temperature strain sensors. We demonstrate that the printing provides a very high sensitivity for detection due to the high surface area of the films. Further, for resistance based sensors such as strain sensors, we observe that the 3D printed films behave like metamaterials, leading to a high gauge factor, an ultra-low thermal strain, and an enhanced thermal stability at temperatures up to 500 C. Analytical models and simulation tools are developed to capture the behavior of these sensors. We also demonstrate a method to print the electronics on vertical walls for antenna applications.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3-D Printed Polymer-based Gas Sensors
3D Electronics and Sensor Circuits by Combining Conventional PCB Technology with Low Temperature Embedding and Forming
3D Printed Anodes for Al-air Batteries
3D Printing of Metals and Metal Oxides from Solution for Energy and Biomedical Applications
3D Printing of Soft Ionic Actuators/Sensors for Soft Robotic Applications
Additive Manufacturing with Aerosol Jet: From Prototyping to Production
Challenges in Gravure and Direct-write Printing of Nano-colloidal Inks
Delaminated Inkjet Printed Lines with Improved Electro-mechanical Behavior
High Performance Sensors and Antennas by 2D and 3D Printing of Nanoparticles
Highly Stretchable Metallic Interconnects on Polymer Substrates: Architecture and Mechanisms
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/C0529C03377A93C285258193005AA23F?OpenDocument">Integrated and Flexible Integrated and Flexible Biosensors for Point-of-care Diagnostics
[Replication or Save Conflict]
Materials Integration for Flexible Electronics: Cu-interconnects, Supercapacitors
Microheater Array Powder Sintering: A New Process for Printed Electronics
Nondestructive Examination Study in P(VDF-TrFE) Filter System and PM2.5 Spatial Resolution Technology by Using Synchrotron Transmission X-ray Microscopy
Printable Functional Materials for Smart Fabrics
Recent Advancement on Printed, Stretchable, and Wearable Electronics in 2D Materials
Room-temperature Aerosol Deposition of PLZT Films on Polymer Substrates
Single-crystalline-like Semiconductor Films on Flexible Substrates: A Route towards Roll-to-roll Manufacturing of High-performance Electronic Devices
Stretchable Wirings Prepared with PU and Silver Flakes
Structural-resolved Study Of Piezoelectric Properties Of P(VDF-TrFE) Films
Textile-enabled Wearable Energy Storage Devices (invited)
Transparent Field Effect Biosensors Printed on Highly Curved Surfaces
Ultrafast Pulsed Light Sintering of Thermoelectric Nanoparticles

Questions about ProgramMaster? Contact programming@programmaster.org