A-35: Effect of Adding Yttrium on the Inclusion Modification and Impact Toughness of E36 Shipbuilding Steel

A Data-driven Approach to Investigate the Influence of Process Parameters on Fatigue Life of Additively Manufactured Metals

A Microstructural Investigation on the Crack Initiation Behavior of an Additively Manufactured Austenitic Stainless Steel

A New Perspective on Visualizing the Elastic Limit and the Necessity of 6D Limit Hypersurfaces

A Statistical Framework to Qualify the Low Cycle Fatigue Performance of Additively Manufactured Steel Replacement Parts

A Summary of NASA’s Efforts for the Development of Additive Manufacturing Metallic Materials

About a Digital Twin for the Fatigue Approach of Additively Manufactured Components

Additive Materials Behavior: Fatigue Case Studies

Criticality of Porosity Defects on the Fatigue Life of Wire + Arc Additive Manufactured Titanium Alloy

Effect of Heat Treatments on Fatigue Properties of Ti-6Al-4V and 316L Produced by Laser Powder Bed Fusion in as Built Surface Condition

Effect of Internal Hydrogen on the Mechanical Behavior of Additively Manufactured Stainless Steels

Effect of Laser Shock Peening Processing Parameters on the Microstructure, Residual Stress, and Fatigue Behavior of Additive Manufactured CoCr Alloy

Effect of Microstructure and Defects on the Fatigue Performance of Additively Manufactured 2205 Duplex Stainless Steel

Effect of Microstructure and Internal Defects on the Cyclic Deformation and Damage Behavior in Additively (SLM) Manufactured Al-Si Alloys

Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg

Effects of Hot Isostatic Pressing Temperature on the Static and Dynamic Properties of Selective Laser Melted Ti-6Al-4V Solid Material

Evolution of Defect Characteristics During In Situ Tensile Loading of a Laser Powder Bed Fusion Processed 316L Stainless Steel Alloy: A Synchrotron X-ray Tomography Study

Exploring the Effect of Size on IN718 Parts Produced by Powder Bed Fusion

Fatigue Assessment of Additively Materials by Means of the Local Strain Energy

Fatigue Behavior of Aluminum Alloys Fabricated by Solid-state Additive Manufacturing

Fatigue Crack Growth Properties of Selective Laser Melting Produced Alloy 718 at Ambient and Elevated Temperatures

Fatigue Crack Initiation and Growth Behavior in Additively Manufactured 17-4 PH Stainless Steel

Fatigue Life Prediction of Additively Manufactured IN718 Using Crystal Plasticity Modeling with Experimental Validation

Finite Element Failure Analysis of Lattice Structures

Fracture Toughness and Fatigue Strength of Selective Laser Melted Aluminium-Silicon: An Overview

Implications of Post-processing Induced Microstructural Changes on the Deformation and Fracture Behavior of Additively Manufactured Ti6Al4V Alloy

Influence of Process Parameters on Fracture Toughness of AlSi10Mg Alloy Fabricated through Laser Beam Melting

Investigating Local Microstructure Response During Crack Initiation and Propagation in DMLS IN718 Subjected to High Cycle Fatigue Loading

Manipulation of Defects, Crystallographic Texture and Tensile Properties in Additively Manufactured Ti-6Al-4V Parts

Mechanical Testing Results from MIDAS: Material Informed Digital Design Demonstration for Additive Structures

Multiaxial Fatigue Analysis of Additively Manufactured 17-4 PH Stainless Steel Notched Specimens

Non-destructive Mechanical Testing of Additive Manufactured Materials

Predicting the Integrity of Additively Manufactured Nickel Alloys

Qualification Research and the Effects of Defects Studies in Laser Powder Bed Fusion of AlSi10Mg

Role of Multi-scale Microstructural Features in Tensile, Compressive, Fatigue, and Fracture Behavior of Direct Metal Laser Sintered Inconel-718

Sources of Scatter in the Fatigue Behavior of Ti-6Al-4V Fabricated via Electron Beam Melting

Surface Roughness Effects on Rotating-bending Fatigue Behavior of Additive Manufactured Stainless Steel 316L

Tensile, Compressive, Cyclic, and Fracture Behavior of Direct Metal Laser Sintered Ti64

Tensile, Creep and LCF Behavior of SLM Fabricated Inconel 718 in As-fabricated and HIPed Conditions

The Effect of Heat Treatment and Alloying of Ni-Ti Alloy with Copper on Improving Its Fatigue Life

The Effects of Microstructure and Material Length Scales on the Fatigue Crack Growth Rates for Thin Wall Additive Manufactured Components

The Effects of Powder Recycling on the Mechanical Properties of Additively Manufactured Materials

The Relationship of Processing Parameters to Surface Roughness and Fatigue Life in Additive Manufacturing

The Role of As-printed Defects and Microstructural Heterogeneities in EBM-PBF Ti-6Al-4V: Tensile Testing and Characterization at Appropriate Length Scales

Why 3D-printing at the Beach is not the Perfect Work-life Balance: Some Observations on Moisture Effects in Metal Powders

Questions about ProgramMaster? Contact programming@programmaster.org