ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XIX
Presentation Title Effects of Pd(P) Thickness on the Interfacial Reaction and Mechanical Properties of the Sn-3.5Ag/Au/Pd(P)/Ni(P) Microelectronic Joints
Author(s) Cheng-Yu Lee, Wei-Ling Chou, Ming-Kai Lu, Tsai-Tung Kuo, Cheng-En Ho
On-Site Speaker (Planned) Cheng-Yu Lee
Abstract Scope The effects of Pd(P) thickness (δPd(P)) on the interfacial reaction between eutectic Sn-Ag (Sn-3.5Ag) solder and Au/Pd(P)/Ni(P) (ENEPIG) surface finish and on the joint mechanical reliability were investigated. The types of intermetallic compound (IMC) species grew at the joint interface strongly depended on δPd(P). A slight increase of δPd(P) from 0 μm to 0.2 μm might cause an additional (Pd,Ni)Sn4 layer formed at the interface after soldering and subsequently solid-state annealing, which significantly retarded the growths of Ni3Sn4, Ni2SnP, and Ni3P, and seriously degraded the shear strength of solder joints in high-speed ball shear (HSBS) testing. This δPd(P)-dependent interfacial microstructure was distinctly different from the Cu-containing joint system, i.e., Sn-Ag-Cu/Au/Pd(P)/Ni(P) and can be rationalized using a Pd-Ni-Sn isotherm. The above observations indicated that δPd(P) is an important factor of solderability and should be appropriately reduced to a specific thickness value in terms of ENEPIG solderability.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

4D Characterization of Electromigration-induced Grain Boundary Damage of Cu Interconnects: X-ray Tomography Experiments and Phase-field Simulations
An Ab-initio Study on the Structural and Electrochemical Propeties of Na3V2(PO4)2F3 as Cathode Materials for Hybrid-ion Batteries
CALPHAD-assisted Analyses of BOF Slag Modification and Reduction
Challenges and Solutions for Experimental Investigation of Air and Moisture Sensitive Li Alloys
D-10: A Switching Model of Phase-change Memory by Combining Electrothermal and Phase-field Models
D-11: CALPHAD-assisted Analyses of BOF Slag Recovery
D-12: Comparison of Oxide Reduction Temperature between Highly <111>-Oriented Nanotwinned Cu and Regular Cu Films
D-13: Effects of Current Stressing on Mechanical Property and Microstructure of an Fe-Ni Alloy at Ambient Temperature
D-14: Effects of Plating Current Density on the Microstructure of Cu Pillars and Its Solderability
D-15: Effects of Surface Finish on the Interfacial Cu6Sn5 Morphology and Mechanical Characteristics in Solder Joints
D-16: From Electric Current-induced Lattice Strain to Electromigration Occurrence: An In-situ Study
D-17: Interfacial Reaction of Au-xAg/Al Couples
D-18: Interfacial Reactions in the Au/Sn-xZn/Cu Sandwich Couples
D-19: Interfacial Reactions in the Cu/Sn/Ni Sandwich Couples
D-20: Interfacial Reactions in the Sn/Au-xCu Couples
D-21: Interfacial Reactions of Ag-Au-xPd Alloys Wire Bonding with Al
D-22: Mechanisms of Abnormal Grain Growth of Al Bonding Wires under Annealing Process
Effects of Copper Electroplating Parameters on the Copper-based Solder Joint Reactions
Effects of Pd(P) Thickness on the Interfacial Reaction and Mechanical Properties of the Sn-3.5Ag/Au/Pd(P)/Ni(P) Microelectronic Joints
Electromigration Effect Upon Single-phase and Two-phase Ag-Cu Alloy: an In-situ Study
Electroplating of Rhodium using Pulse Current Plating Method
Full Battery Design for Li-ion Batteries Using CALPHAD Technique
High-throughput CALPHAD-type Calculation in Design of Coherent Precipitate-strengthening AlCuFeNiTi Multi-principal Element Alloys
In-situ Study of Electrochemical Migration of Tin in Presence of Contaminants
Interfacial Reaction in the Lead-free Solder/Cu-2.0Be (Alloy 25) Couples
Interfacial Reactions between Lead-free Solders and Electroless Co(B) Metallization
Interfacial Stability between High-temperature Lead-free Solders and Substrates
Investigation of Metal Filament Formation
Learning from the Ni3Sn2 for Cu6Sn5
Microstructure of Cu/Cu Joints using Sn-Coated Cu Particle Paste for High-temperature Application
Real-time Observation of the Accelerated Growth of (Cu,Ni)6Sn5 on Cu-xNi Current Collectors
Revisit the Blech Critical Product: Lattice Strain Induces Electromigration Effect
Study on Eelectromigration of Cu-Sn IMC Formation Due to Currents Stress and Temperature
Study on the Phase Diagrams of Bi-Te Binary and Bi-Te-RE (Yb, La, Ce, Nd, Sm, Tb, Er) Ternary Systems
The Effect of the Cu Preferred Orientation on the Adhesion between Cu and LCP in FCCL
Thermodynamic Modeling of the Cu-Mg-Si-Sn Quaternary System and Interpretation of Mg2(Si0.3Sn0.7)/Cu Thermoelectric Interconnections
Wafer Level SLID Bonding - Formation and Evolution of Microstructures
Zn Whisker Growth under High Temperature and Humidity Conditions

Questions about ProgramMaster? Contact programming@programmaster.org