About this Abstract |
Meeting |
2021 TMS Annual Meeting & Exhibition
|
Symposium
|
Mechanical Response of Materials Investigated through Novel In-situ Experiments and Modeling
|
Presentation Title |
Creation of Strength Diagrams of Aluminum Flat Products, Dependent on the Different Thermomechanical Processes |
Author(s) |
Kaan Sadik Ipek, Emel Çalışkan, Derya Dispinar |
On-Site Speaker (Planned) |
Kaan Sadik Ipek |
Abstract Scope |
Optimization of the desired process parameters can be realized by modeling the production processes. In this study, it is aimed to investigate the effect of cold rolling and annealing process on the 1050, 3005, 3105, 8006 aluminum commercial alloys produced by twin roll casting. Cold rolling process were applied at different deformation rates between 25% and 95% from the casting thicknesses. Also annealing processes were applied between 220 and 480 degrees were obtained at 20 degree intervals. Tensile strength, hardness and electrical conductivity have been carried out on materials subjected to different cold rolling and anneling processes. Formabilities of materials were examined with the Erichsen test. As a result of the experiments, mechanical strength limit values were obtained depending on the different cold rolling and annealing processes of the materials and process optimization was carried out by examining them with the help of regression models. |
Proceedings Inclusion? |
Planned: |
Keywords |
Aluminum, Mechanical Properties, Modeling and Simulation |