ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Advanced Real Time Optical Imaging
Presentation Title Direct Observation of Iron Solidification under Molten Slag
Author(s) Takeshi Yoshikawa
On-Site Speaker (Planned) Takeshi Yoshikawa
Abstract Scope Uniform shell formation during continuous casting of steel is the great issue in the stable casting operation and surface quality control for hot slabs. Importance of mold flux for mild cooling of solidified shell has been proven and the relationship between flux composition and shell thickness has been investigated. However, the effect of the flux composition on the formation of the shell was not understood yet. Thus the solidification behavior of iron under molten slag was in-situ observed using the optical transparency of the molten slag. CaO-SiO2-Al2O3 slag with different basicity was melted on molten iron under the optical microscope system equipped with a long focal objective lens. Nevertheless slag composition, iron solidified after undercooling of 60- 100 K with forming dendrite along the Fe-slag interface. The role of slag on the initial solidification will be discussed.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Agglomeration Behavior of Non-metallic Inclusions in Liquid High Carbon Steel
Agglomeration of Non-metallic Inclusions at the Liquid Steel/Ar Gas Interface: A Summary of In-situ Observation Experiments and a Theoretical Study
Current State Art of Double Hot Thermocouple Technology—Novel Way for the Study of Mold Flux High-temperature Properties
Determining Metastable Phase Transformation Temperature between Al4Sm-beta and Al4Sm-gamma
Direct Observation of Iron Solidification under Molten Slag
High-temperature Microscopy Incorporating Differential Thermal Analysis
In-situ Microscopic Study of Natural Hematite over Repeated Reduction-oxidation Gas Exposures
In-situ Observation of Reduction or Oxidation of Molten CaO-FeOx-SiO2 Oxides at 1573 K
In-situ Observation of Sulfide Formation during Solidification in Fe-Cr-Ni-Mn-S Alloys
In-situ Studies of Selective Oxidation in Advanced High Strength Steels
In Situ Observation of Dissolution of Oxide Inclusions in Steelmaking Slags
Insitu Tensile Performance of P91 Steel in CO2 Environment, Utilizing Small Samples and a Confocal Microscope
Introduction to Advanced Real Time Optical Imaging
Investigation of Integrated Recycling Waste Heat and Slag Resources Using Single Hot Thermocouple Technique
Localized Concentration of Metal Cations of Steelmaking Slags and its Visualization Using Confocal Laser Scanning Microscope
Mass Transfer in High-temperature Laser Confocal Microscopy
Observations of Ferrite Formation and Growth in Inclusion-engineered Low Alloy Steels during In-situ Heat Treatments
Real-time Observation of Solution Growth Interface of SiC Using Alloy Solvent
Real Time Observation of High Temperature Metallurgical Phenomenon at the University of Leuven
Thermal Imaging Furnace for the Investigation of the Molten State
Using High-temperature Confocal Scanning Laser Microscopy to Study Transient Phenomena: Swelling and Spontaneous Emulsification
Wettability of Graphite-alumina Composites against Molten CaO-SiO2-Al2O3-MgO Slags
Wetting, Spreading and Penetrating Behavior of Slags in Contact with Refactory Ceramics

Questions about ProgramMaster? Contact programming@programmaster.org