ProgramMaster Logo
Conference Tools for 2014 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2014 TMS Annual Meeting & Exhibition
Symposium Magnesium Technology 2014
Presentation Title Static Recrystallization and Grain Growth in a Magnesium AZ31B-H24 Alloy Sheet
Author(s) Aravindha R Antoniswamy, Jon T Carter, Louis G Hector, Eric M Taleff
On-Site Speaker (Planned) Aravindha R Antoniswamy
Abstract Scope The effects of static annealing on recovery, recrystallization and grain growth in a magnesium AZ31B-H24 alloy sheet are investigated at 50C to 450C. Full recrystallization is observed after annealing at 250C or higher temperatures. Recrystallized grain size increases with temperature through normal grain growth. Room-temperature hardness drops abruptly following recrystallization and then decreases with increasing grain size. Predictive relationships are proposed for recrystallized grain size as a function of temperature and time and for hardness as a function of recrystallized grain size.The effects of recrystallization and grain growth on plastic flow and anisotropy will also be discussed.
Proceedings Inclusion? Planned: A combination print-CD volume


A New Method for Melting Mg-Li Alloys
A Novel Process for Producing Large Scale mg-Sheets
A Review of the Influence of Production Methods and Intermetallic Phase on the Creep Properties of AZ91
Acoustic Emission Analysis of Plane Strain Compressed Mg Single Crystals
Al and Zn Impurity Diffusion in Binary and Ternary Magnesium Solid-solutions
Alloy Development, Manufacturing and Design for Magnesium Applications
An Introduction to the Forging of Elektron 43 – A High Performance Wrought Magnesium Alloy
As-cast Microstructure and Texture of Twin-roll Casting AZ31
Automotive Magnesium: Impacts and Opportunities
Characterization of Damage in Magnesium Using Digital Image Correlation and Electron Backscattered Diffraction Patterning
Consolidation of Blended Magnesium Powders by Microwave Processing
Corrosion-stress Relaxation Effects on Tensile Properties of an AZ61 Magnesium Alloy
Corrosion Behavior of Magnesium Alloys Containing Sn and Zn
Corrosion Behaviour of Friction Stir Welded AZ31 Joints for Automotive Applications
Crack Propagation under Bending in Cast Mg10GdxNd-T4 Alloys
Cytocompatibility of Mg Alloys and the Effect of Cells on Their Degradation in Biological Environment
Deformation Behavior and Dynamic Recrystallization of Micro-alloyed Mg-Al-Ca Alloys during High Temperature Deformation
Deformation Behavior of ZE10 Magnesium Alloy Sheet
Deformation, Recrystallization and Grain Growth Behavior of Large-strain Hot Rolled Binary Mg-1Dy Alloy
Design Strategy for Zn Reduction in an Extreme-high-pure Mg-Zn-Ca System with High Strength and Simultaneously High Ductility
Development of a Generalized Understanding of Environmentally-Assisted Degradation of Mg-Al Alloys
Development of a High Strength Ductile Wrought Mg-Zn Based Alloy
Dislocation Activity in AZ31B Magnesium Deformed at Moderately Elevated Temperatures via EBSD
Dynamic Behaviour of a Rare Earth Containing Mg Alloy, WE43B-T5, Plate with Comparison to Conventional Alloy, AM30-F
Effect of Al Addition on Microstructure of AZ91D
Effect of Annealing on Microstructure, Texture and Tensile Properties of Twin-roll Cast AZ31B
Effect of CaO on Hot Workability, Microstructures, and Mechanical Properties of Mg-9.5Zn-2Y Alloy
Effect of Composition and Extrusion Temperature on the Microstructure, Strength and Ductility of Ultra-high Strength Mg-Zn-Y Alloys
Effect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61
Effect of Physical Properties of Dolomite on Carbothermic Reduction
Effect of Surface Condition on the Localized Corrosion Behavior of Magnesium Alloy AZ31B
Effect of Volume Fraction of Icosahedral Phase in CaO Added Mg-Zn-Y Alloys
Effect of Yttrium Addition on Texture Development in a Cast Mg-Al-Y Magnesium Alloy during Compression
Effects of Current Density on Microstructure and Corrosion Property of Coating on AZ31 Mg Alloy Processed via Plasma Electrolytic Oxidation
Effects of Process Parameters on Texture Development of ZEK100 Mg Sheets during Friction Stir Spot Welding
Emerging Applications Using Mg Alloy Powders: A Feasibility Study
Enhancing Corrosion Resistance by a Hydrophobic Surface Feature for Magnesium Alloy AZ91D
Extrusion of Hollow Magnesium Profiles and Investigation of Extrusion Seams
Finite-element Analysis of Melt Flow in Horizontal Twin-roll Casting of Magnesium Alloy AZ31
Formation and Evolution of Intermetallic Phases in the Mg-Nd-Zn-Zr System
Friction Stir Welding of Magnesium Alloy Type AZ 31
High Shear Deformation to Produce High Strength and Energy Absorption in Mg Alloys
I17: Mechanical Anisotropy in a Thermo-mechanically Processed Magnesium Alloy at a Wide Range of Strain Rate and Temperature
I18: The ExoMet Project: EU/ESA Research on High-performance Light-metal Alloys and Nanocomposites
I19: Effects of different strain and heating factor on the microstructure and compressive properties of AZ61 Mg alloy produced by SIMA process
I20: An Investigation of the Local Mechanical Response at the Grain Level for Magnesium
I21: Effect of Li and Trace Element Addition on Microstructure and Mechanical Properties of Mg-Zn Based Alloys
I22: Effect of Ti Based Additives on Hydrogen Storage Properties of Magnesium Hydride
I24: Mechanical Properties of Magnesium and AZ31 Nano-pillars
I25: Microscale Plastic Strain Distribution in Slip Dominated Deformation of mg Alloys
I26: Advanced Performance of Magnesium Alloy ZK60 Fabricated by a New Integrated Process Providing a Conduit for Transfer to Industrial Manufacturing
I27: Sensory Magnesium Components – Online-Measurement of Static and Dynamic Loads Utilizing Magnetic Magnesium Alloys
I28: Coupled Modeling of Electromagnetic Field, Fluid Flow, Heat Transfer and Solidification during Low Frequency Electromagnetic Casting of AZ80 Magnesium Alloys
I29: Evaluation of Fracture Criteria of Mg-Alloy Sheets during Formability Testing
I30: Effect of Friction Stir Processing on Toughness of WE43 Alloy
I31: Effect of Processing Parameter on the Microstructural Evolution and Mechanical Properties of a WE43 Alloy during Friction Stir Welding
I32: A New Microsegregation Model for the Prediction of as Cast Microstructure of Mg Alloys
I33: Characterization of Microstructure and Mechanical Properties of Twin Roll Strip-cast Mg-Al-X Alloys
I34: Forming an Automobile Rear Seat Frame Using Magnesium Alloy Extrudites
I35: Influence of Initial Microstructure and Process Parameter on the Microstructural Evolution of a WE43 Alloy during Friction Stir Welding
I36: A Multiscale Investigation of the Effect of Yttrium on Deformation in Magnesium
I37: Deformation Behaviour of AZ80 Alloy and Pure Magnesium under Uniaxial and Plane Strain Compression
I38: Corrosion Protection of Magnesium Alloys Using Ammonium-Phosphate Ionic Liquids- Produced Conversion Coatings
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/C5E22814EB7BF50B85257B9500393C58?OpenDocument">I39: Magnesium ElectroreI39: Magnesium Electrorefining in Non-aqueous Electrolyte at Room Temperature
[Replication or Save Conflict]
I40: Investigation of the Corrosion for Mg–Li-xGd–yY (x=7、8、9、10、11 wt%;y=1、2、3、4、5 wt%) Alloys
I41: Formation of Tetrahedron MgYNi4 and the Catalytic Effect on Hydrogenation Properties of Mg-Ni Alloy
I42: Reversible Hydrogenation of Mg Synergistically Catalysed by Amorphous Mg2Ni Alloy and MWCNTs at Room Temperature
I43: Additive Manufacturing of Mg Powder via Solid State Wrought Metal Deposition Process
I44: Atomistic Modeling Study on the Interactions between the Liquid Nitrogen and Magnesium-based Alloys during Powder Metallurgy (PM) Process
I45: Effects of Processing Routes on Powder Metallurgy Magnesium Alloys
I47: Effects of Surface Pretreatment and Processing Condition on the Film Properties of PEO Processed Strip-cast AZ31+Ca Mg Alloys
I48: Characterization of Surface and Corrosion Behavior of PEO Coatings on Strip-Cast AZ31Mg Alloy in 3.5% NaCl Solution
I49: Studies on Corrosion Behavior of AZ91D Magnesium Alloy and Al-Si Alloy with Epoxy,Al Power Coatings
I50: The Evaluation of Histological Methods for Biodegradable Magnesium and Magnesium Alloys
I51: Effect of Sn Microstructure and Tensile Properties of Hot-rolled Mg-Zn Sheet
I52: Mechanical Properties Factor Decomposition in Mg-alloys
I54: Comparative Studies on Microstructure, Tensile Properties and Formability of AZ31 and ZX31 Sheets Prepared by Hot Rolling and Annealing Treatment
I55: Thermodynamic Refinement of Mg-RE-based Ternary Systems by Considering As-cast Microstructures
I56: Precipitation Evolution and Kinetics in a Magnesium-neodymium-zinc Alloy
Improvement of Cytocompatibility of Magnesium Alloy ZM21 by Surface Modification
In-situ Neutron Diffraction Study of Aging in Alloy ZK60A
In Situ Synchrotron Radiation Diffraction during Melting and Solidification of Mg-Al Alloys Containing CaO
In Situ Synchrotron Radiation Diffraction during Solidification of Mg4Y and Mg4YxGd Alloys (x = 1, 4 wt.- %)
Indentation Creep Behavior of Mg-10Gd-3Y-0.5Zr (wt.%) Alloy at Elevated Temperatures
Influence of Rolling Direction and Temperature on the Texture Formation in Rolled AZ31B Magnesium Alloy
Isothermal Hydrogenation Kinetics Study of Magnesium Hydride with TiH2 Additive
Life Cycle Assessment of Eco-Magnesium Alloy Produced by Green Metallurgy EU Project Process Route
Low Cycle Fatigue Properties of Extruded Mg10GdxNd Alloys
Microstructural Evolution and Its Relationship to the Mechanical Properties of Mg AZ31B Friction Stir Back Extruded Tubes
Microstructure Evolution and Mechanical Properties of Mg–14%Li–1%Al Alloy during the High-pressure Torsion
Oxidation and Corrosion Behavior of Non-flammable Magnesium Alloys Containing Ca and Y
Physically-based Model for Static Recrystallization in AZ31
Post Deformation Annealing Behavior of Mg-Al-Sn Alloys
Precipitate Formation in Uniaxially Stressed High Pressure Die Cast Binary Mg-Nd Alloy during Creep Testing
Precipitation Strengthening of a Mg-Zn Alloy in Tension and Compression
Quantification of Microstructure-properties-behavior Relations in Mg Alloys Using a Hybrid Approach
Recovery of Magnesium and Recycling of Spent Solution in Chloride-based Atmospheric Acid Leaching of Laterite
Recovery of Rare Earth Metals in Used Magnets by Molten Magnesium
Recrystallization Behavior of Binary Mg Alloys
Selective Laser Melting of Magnesium Parts
Significant Precipitation Strengthening in Extruded Mg-Sn-Zn Alloys
Simulating Microstructure Evolution and Deformation Behavior of Magnesium Alloys Using the Intermediate Phi-model
Solidification Characteristics of Wrought Magnesium Alloys Containing Rare Earth Metals
Spike-forging of As-cast TX32 Magnesium Alloy
Static Recrystallization and Grain Growth in a Magnesium AZ31B-H24 Alloy Sheet
Strengthening Due to the Percolating Eutectic Microstructure in Squeeze Cast MRI230D
Structure and Properties of Interlayer Formed between Magnesium Alloy Core and Aluminium Alloy Cover during Deformation
Suggestion of a Binary Zinc-based Solder for Joining Mg Alloy AZ 31B
Texture Evolution during Grain Growth of Mg Alloy, AZ31B
Texture Evolution during Wire Drawing of Mg-RE Alloy
The Athermal Component of the Strength of Binary Mg Solid Solutions
The IMA Study on the Life Cycle Assessment (LCA) of Magnesium
The Role of Deformation Modes on Ductility and Dynamic Recrystallization Behavior of AZ31 Mg Alloy at Low Temperatures
Thermodynamic and Kinetic Calculations for TRC (Twin Roll Casting) Mg Alloy Design
Time Dependent Springback of a Magnesium Alloy
Welding of Dissimilar Light Metals by Disk Laser

Questions about ProgramMaster? Contact